It has been pointed out that naming a subsystem "genpd" isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. In a way to improve the situation, let's rename the subsystem to pmdomain, which ideally should indicate that this is about so called Power Domains or "PM domains" as we often also use within the Linux Kernel terminology. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
Pull ARM SoC driver updates from Arnd Bergmann: "The main change this time was the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform" * tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits) bus: fsl-mc: Use common ranges functions soc: kunpeng_hccs: fix some sparse warnings about incorrect type soc: loongson2_pm: add power management support soc: dt-bindings: add loongson-2 pm soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 bus: ti-sysc: Fix cast to enum warning soc: kunpeng_hccs: add MAILBOX dependency MAINTAINERS: remove OXNAS entry dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated irqchip: irq-versatile-fpga: remove obsolete oxnas compatible soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller soc: kunpeng_hccs: fix size_t format string soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX dt-bindings: firmware: qcom: scm: Updating VMID list firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status ...
Pull ARM SoC generic power domain driver updates from Ulf Hansson: "This adds a new subsystem for generic power domain providers in drivers/genpd and starts moving some of the corresponding code in there. We have currently ~60 users of the genpd provider interface, which are sprinkled across various subsystems. To release some burden from the soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a better overall view of what goes on in the area, I will help out with maintenance" [ I find the "genpd" name singularly uninformative, so we'll probably end up moving this driver subsystem somewhere else, but that's still being discussed - Linus ] * tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits) genpd: ti: Use for_each_node_with_property() simplify code logic genpd: Explicitly include correct DT includes genpd: imx: scu-pd: initialize is_off according to HW state genpd: imx: scu-pd: Suppress bind attrs genpd: imx: scu-pd: do not power off console if no_console_suspend genpd: imx: scu-pd: add more PDs genpd: imx: scu-pd: enlarge PD range genpd: imx: relocate scu-pd under genpd MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER genpd: Makefile: build imx genpd: move owl-sps-helper.c from drivers/soc soc: starfive: remove stale Makefile entry ARM: ux500: Move power-domain driver to the genpd dir ARM: ux500: Convert power-domain code into a regular platform driver soc: xilinx: Move power-domain driver to the genpd dir soc: ti: Mover power-domain drivers to the genpd dir soc: tegra: Move powergate-bpmp driver to the genpd dir soc: sunxi: Move power-domain driver to the genpd dir soc: starfive: Move the power-domain driver to the genpd dir soc: samsung: Move power-domain driver to the genpd dir ...
Let's convert to use for_each_node_with_property() to iterate through the DT nodes, as to simplify the code logic a bit. No intended functional change. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This pull request contains Broadcom SoCs drivers changes for 6.6, please pull the following: - Rob updates the Broadcom SoC drivers to use the correct DT includes * tag 'arm-soc/for-6.6/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: Explicitly include correct DT includes Link: https://lore.kernel.org/r/20230818164539.2871539-3-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v6.6 Compatible and clock handling in the Qualcomm SCM driver is cleaned up, together with a couple stylistic cleanups and transition to mark exported symbols GPL only. An abstraction for the RPM subsystem is introduced, to make align the structure of the SMD and GLINK nodes thereof with the structure when a remoteproc is involved. This is done to facilitate associating additional entities with the RPM subsystem. The qmp_send() API is modified to not expose hardware requirements onto the client drivers, and then further extended to allow command formatting directly in the API, to facilitate this typical use case. In the Qualcomm Command DB driver, NUL characters previously included in identifiers are dropped from the debugfs, to facilitate scripting. The thresholds of the BWMON driver are simplified to avoid hard coded starting values. The OCMEM driver is updated with some cleanups and fixes, and addition of MSM8226 support. PMIC_GLINK gains support for retimer switches, safe mode is selected when the cable is disconnected from altmode and the same is enabled for SM8550. An off-by-one string length check is corrected in the QMI encoder decoder library. The RPMh tracepoints are extended to include the state of the request, to provide needed context in the traced events. The series from Ulf creating a genpd framework is integrated, to facilitate the other changes to the cpr, rpmpd and rpmhpd driver. SDX75 support is added to the rpmhpd driver, and the rpmpd driver is extended with the same sync_state logic found in the rpmhpd driver. The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019 platform is dropped. Clock handling in the GSBI driver is cleaned up with the use of devm_clk_get_enabled(). The list of VMIDs defined for the SCM assign memory interface is extended. * tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits) soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller dt-bindings: firmware: qcom: scm: Updating VMID list dt-bindings: qcom: Update RPMHPD entries for some SoCs soc: qcom: qmi_encdec: Restrict string length in decode soc: qcom: smem: Fix incompatible types in comparison soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe() soc: qcom: socinfo: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: Add SoC ID for SM7125 dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID soc: qcom: socinfo: drop the IPQ5019 SoC ID soc: qcom: socinfo: add SM4450 ID dt-bindings: arm: qcom,ids: add SoC ID for SM4450 soc: qcom: pmic_glink: enable altmode for SM8550 soc: qcom: pmic_glink_altmode: add retimer-switch support soc: qcom: pmic_glink_altmode: handle safe mode when disconnect soc: qcom: rpmhpd: Add SDX75 power domains dt-bindings: power: qcom,rpmpd: Add compatible for sdx75 genpd: Makefile: build imx ... Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PD_VO powerdomain for rv1126 and disabling of the automatic switch between sdmmc and jtag for rk3588 (makes sdmmc unreliable). This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves the powerdomain drivers into a new genpd subsystem. * tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The current code default set is_off to true except console resource, this implies bootloader should power off all the resources it uses. But this is not always true, let's check the HW state and set is_off. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This driver is registered as platform driver, but removing and binding again would cause system not workable. So suppress bind attrs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>