Pull take two of the GPIO updates:
 "Same stuff as last time, now with a fixup patch for the previous
  compile error plus I ran a few extra rounds of compile-testing.

  This is the bulk of GPIO changes for the v3.19 series:

   - A new API that allows setting more than one GPIO at the time.  This
     is implemented for the new descriptor-based API only and makes it
     possible to e.g. toggle a clock and data line at the same time, if
     the hardware can do this with a single register write.  Both
     consumers and drivers need new calls, and the core will fall back
     to driving individual lines where needed.  Implemented for the
     MPC8xxx driver initially

   - Patched the mdio-mux-gpio and the serial mctrl driver that drives
     modems to use the new multiple-setting API to set several signals
     simultaneously

   - Get rid of the global GPIO descriptor array, and instead allocate
     descriptors dynamically for each GPIO on a certain GPIO chip.  This
     moves us closer to getting rid of the limitation of using the
     global, static GPIO numberspace

   - New driver and device tree bindings for 74xx ICs

   - New driver and device tree bindings for the VF610 Vybrid

   - Support the RCAR r8a7793 and r8a7794

   - Guidelines for GPIO device tree bindings trying to get things a bit
     more strict with the advent of combined device properties

   - Suspend/resume support for the MVEBU driver

   - A slew of minor fixes and improvements"

* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
  gpio: mcp23s08: fix up compilation error
  gpio: pl061: document gpio-ranges property for bindings file
  gpio: pl061: hook request if gpio-ranges avaiable
  gpio: mcp23s08: Add option to configure IRQ output polarity as active high
  gpio: fix deferred probe detection for legacy API
  serial: mctrl_gpio: use gpiod_set_array function
  mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
  gpio: remove const modifier from gpiod_get_direction()
  gpio: remove gpio_descs global array
  gpio: mxs: implement get_direction callback
  gpio: em: Use dynamic allocation of GPIOs
  gpio: Check if base is positive before calling gpio_is_valid()
  gpio: mcp23s08: Add simple IRQ support for SPI devices
  gpio: mcp23s08: request a shared interrupt
  gpio: mcp23s08: Do not free unrequested interrupt
  gpio: rcar: Add r8a7793 and r8a7794 support
  gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
  gpiolib: allow simultaneous setting of multiple GPIO outputs
  gpio: mvebu: add suspend/resume support
  gpio: gpio-davinci: remove duplicate check on resource
  ..

This patch adds GPIO and IRQ support for the Diolan DLN-2 GPIO module.

Information about the USB protocol interface can be found in the
Programmer's Reference Manual [1], see section 2.9 for the GPIO
module commands and responses.

[1] https://www.diolan.com/downloads/dln-api-manual.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add a gpiolib and IRQ chip driver for Vybrid ARM SoC using the
Vybrid's GPIO and PORT module. The driver is instanced once per
each GPIO/PORT module pair and handles 32 GPIO's.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds driver to support GPIO functionality for 74xx-compatible
ICs with MMIO access. Compatible models include:
 1 bit:   741G125 (Input), 741G74 (Output)
 2 bits:  742G125 (Input), 7474 (Output)
 4 bits:  74125 (Input), 74175 (Output)
 6 bits:  74365 (Input), 74174 (Output)
 8 bits:  74244 (Input), 74273 (Output)
 16 bits: 741624 (Input), 7416374 (Output)

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add APM X-Gene SoC gpio controller driver.

Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull GPIO update from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.17 development cycle, and
  this time we got a lot of action going on and it will continue:

   - The core GPIO library implementation has been split up in three
     different files:
     - gpiolib.c for the latest and greatest and shiny GPIO library code
       using GPIO descriptors only
     - gpiolib-legacy.c for the old integer number space API that we are
       phasing out gradually
     - gpiolib-sysfs.c for the sysfs interface that we are not entirely
       happy with, but has to live on for ABI compatibility

   - Add a flags argument to *gpiod_get* functions, with some
     backward-compatibility macros to ease transitions.  We should have
     had the flags there from the beginning it seems, now we need to
     clean up the mess.  There is a plan on how to move forward here
     devised by Alexandre Courbot and Mark Brown

   - Split off a special <linux/gpio/machine.h> header for the board
     gpio table registration, as per example from the regulator
     subsystem

   - Start to kill off the return value from gpiochip_remove() by
     removing the __must_check attribute and removing all checks inside
     the drivers/gpio directory.  The rationale is: well what were we
     supposed to do if there is an error code? Not much: print an error
     message.  And gpiolib already does that.  So make this function
     return void eventually

   - Some cleanups of hairy gpiolib code, make some functions not to be
     used outside the library private and make sure they are not
     exported, remove gpiod_lock/unlock_as_irq() as the existing
     function is for driver-internal use and fine as it is, delete
     gpio_ensure_requested() as it is not meaningful anymore

   - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function
     calls, which is logical since this is already supported when
     referencing GPIOs from e.g. device trees

   - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib
     irqchip helpers cutting down on GPIO irqchip boilerplate a bit more

   - New driver for the Zynq GPIO block

   - The usual incremental improvements around a bunch of drivers

   - Janitorial syntactic and semantic cleanups by Jingoo Han, and
     Rickard Strandqvist especially"

* tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits)
  MAINTAINERS: update GPIO include files
  gpio: add missing includes in machine.h
  gpio: add flags argument to gpiod_get*() functions
  MAINTAINERS: Update Samsung pin control entry
  gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
  gpio: lynxpoint: Convert to use gpiolib irqchip
  gpio: split gpiod board registration into machine header
  gpio: remove gpio_ensure_requested()
  gpio: remove useless check in gpiolib_sysfs_init()
  gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
  gpio: move gpio_ensure_requested() into legacy C file
  gpio: remove gpiod_lock/unlock_as_irq()
  gpio: make gpiochip_get_desc() gpiolib-private
  gpio: simplify gpiochip_export()
  gpio: remove export of private of_get_named_gpio_flags()
  gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
  gpio: zynq: Clear pending interrupt when enabling a IRQ
  gpio: drop retval check enforcing from gpiochip_remove()
  gpio: remove all usage of gpio_remove retval in driver/gpio
  devicetree: Add Zynq GPIO devicetree bindings documentation
  ...

Add support for GPIO controller used by Xilinx Zynq.

v3 changes:
 - Use linux/gpio/driver.h instead of linux/gpio.h
 - Make irq a local variable in probe

v2 changes:
 - convert to pm_runtime_force_(suspend|resume)
 - add pm_runtime_set_active in probe()
 - also (un)prepare clocks when they are dis-/enabled
 - add some missing calls to pm_runtime_get()
 - use pm_runtime_put() instead of sync variant
 - remove gpio chip in driver remove()
 - remove redundant type casts
 - directly use IO helpers
 - use BIT macro to set/clear bits
 - migrate to GPIOLIB_IRQCHIP

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The old integer GPIO interface is, in effect, a privileged user of the
gpiod interface. Reflect this fact further by moving legacy GPIO support
into its own source file. This makes the code clearer and will allow us
to disable legacy GPIO support in the (far) future.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

sysfs support is currently entangled within the core GPIO support, while
it should relly just be a (privileged) user of the integer GPIO API.
This patch is a first step towards making the gpiolib code more readable
by splitting it into logical parts.

Move all sysfs support to their own source file, and share static
members of gpiolib that need to be in the private gpiolib.h file. In
the future we will want to put some of them back into gpiolib.c, but this
first patch let us at least identify them.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Devices based on Intel SoC products such as Baytrail have a Power
Management IC. In the PMIC there are subsystems for voltage regulation,
A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is
called Crystal Cove.

This patch adds support for the GPIO function in Crystal Cove.

Signed-off-by: Yang, Bin <bin.yang@intel.com>
Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>