linux-toradex.git/drivers/gpio/Makefile, branch v3.7

Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-10-07T11:55:16+00:00

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...

Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-10-05T03:01:30+00:00

Pull MFD changes from Samuel Ortiz:
 "MFD bits for the 3.7 merge window.

  As usual we have a few new drivers:

   - TI LP8788
   - TI OMAP USB TLL
   - Maxim MAX8907
   - SMSC ECE1099
   - Dialog Semiconductor DA9055
   - A simpler syscon driver that allow us to get rid of the anatop one.

  Drivers are also gradually getting Device Tree and IRQ domain support.

  The following drivers got DT support:
   - palmas, 88pm860x, tc3589x and twl4030-audio

  And those ones now use the IRQ domain APIs:
   - 88pm860x, tc3589x, db8500_prcmu

  Also some other interesting changes:
   - Intel's ICH LPC now supports Lynx Point
   - TI's twl4030-audio added a GPO child
   - tps6527 enabled its backlight subdevice
   - The twl6030 pwm driver moved to the new PWM subsystem

  And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,
  palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family."

Fix up various annoying conflicts: the DT and IRQ domain support came in
twice and was already in 3.6. And then it was apparently rebased.

Guys, DON'T REBASE!

* tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)
  ARM: dts: Enable 88pm860x pmic
  mfd: 88pm860x: Move gpadc init into touch
  mfd: 88pm860x: Device tree support
  mfd: 88pm860x: Use irqdomain
  mfd: smsc: Add support for smsc gpio io/keypad driver
  backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe
  mfd: DA9055 core driver
  mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list
  mfd: wm5110: Add register patches for revision B
  mfd: wm5110: Disable control interface error report for WM5110 rev B
  mfd: max8907: Remove regulator-compatible from DT docs
  backlight: Add TPS65217 WLED driver
  mfd: Add backlight as subdevice to the tps65217
  mfd: Provide the PRCMU with its own IRQ domain
  mfd: Fix max8907 sparse warning
  mfd: Add lp8788 mfd driver
  mfd: dbx500: Provide a more accurate smp_twd clock
  mfd: rc5t583: Fix warning messages
  regulator: palmas: Add DT support
  mfd: palmas: Change regulator defns to better suite DT
  ...

Merge tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2012-10-02T23:05:10+00:00

Pull GPIO changes from Linus Walleij:
 "So this is the LW GPIO patch stack for v3.7:
   - refactoring from Thierry Redding at Arnd Bergmann's request to use
     the seq_file iterator interface in gpiolib.
   - A new driver for Avionic Design's N-bit GPIO expander.
   - Two instances of mutexes replaced by spinlocks from Axel Lin to
     code that is supposed to be fastpath compliant.
   - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori
     Morimoto.
   - Dynamic GPIO numbers, device tree support, daisy chaining and some
     other fixes for the 74x164 driver by Maxime Ripard.
   - IRQ domain and device tree support for the tc3589x driver by Lee
     Jones.
   - Some conversion to use managed resources devm_* code.
   - Some instances of clk_prepare() or clk_prepare_enable() added to
     support the new, stricter common clock framework.
   - Some for_each_set_bit() simplifications.
   - Then a lot of fixes as we fixed up all of the above tripping over
     our own shoelaces and that kind of thing."

* tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits)
  gpio: pcf857x: select IRQ_DOMAIN
  gpio: Document device_node's det_debounce
  gpio-lpc32xx: Add GPI_28
  gpio: adnp: dt: Reference generic interrupt binding
  gpio: Add Avionic Design N-bit GPIO expander support
  gpio: pxa: using for_each_set_bit to simplify the code
  gpio_msm: using for_each_set_bit to simplify the code
  gpio: Enable the tc3298x GPIO expander driver for Device Tree
  gpio: Provide the tc3589x GPIO expander driver with an IRQ domain
  ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled
  gpio: pcf857x: fixup smatch WARNING
  gpio: 74x164: Add support for the daisy-chaining
  gpio: 74x164: dts: Add documentation for the dt binding
  dt: Fix incorrect reference in gpio-led documentation
  gpio: 74x164: Add device tree support
  gpio: 74x164: Use dynamic gpio number assignment if no pdata is present
  gpio: 74x164: Use devm_kzalloc
  gpio: 74x164: Use module_spi_driver boiler plate function
  gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places
  gpio: em: Use irq_data_get_irq_chip_data() at appropriate places
  ...

gpio: introduce gpio-mvebu driver for Marvell SoCs

2012-09-22T14:51:36+00:00

This driver aims at replacing the arch/arm/plat-orion/gpio.c driver,
and is designed to be compatible with all Marvell EBU SoCs: Orion,
Kirkwood, Dove, Armada 370/XP and Discovery.

It has been successfully tested on Dove and Armada XP at the moment.

Compared to the plat-orion driver, this new driver has the following
added benefits:

 *) Support for Armada 370 and Armada XP
 *) It is integrated with the mvebu pinctrl driver so that GPIO pins
    are properly muxed, and the GPIO driver knows which GPIO pins are
    output-only or input-only.
 *) Properly placed in drivers/gpio
 *) More extensible mechanism to support platform differences. The
    plat-orion driver uses a simple mask-offset DT property, which
    works fine for Discovery MV78200 but not for Armada XP. The new
    driver uses different compatible strings to identify the different
    variants of the GPIO controllers.

Signed-off-by: Thomas Petazzoni 
Cc: Grant Likely 
Cc: Linus Walleij 
Cc: Andrew Lunn 
Cc: Jason Cooper 
Cc: Gregory Clement 
Tested-by: Sebastian Hesselbarth 
Reviewed-by: Linus Walleij 
Tested-by: Andrew Lunn 
Acked-by: Arnd Bergmann 
Signed-off-by: Jason Cooper

arm: vt8500: gpio: Devicetree support for arch-vt8500

2012-09-21T07:23:59+00:00

Converted the existing arch-vt8500 gpio to a platform_device.
Added support for WM8505 and WM8650 GPIO controllers.
Replaced existing readl/writel calls with _relaxed variants.
Replaced existing unsigned variables with u32 to match register size.

Signed-off-by: Tony Prisk 
Reviewed-by: Linus Walleij

gpio: Add basic support for TWL6040 GPOs

2012-09-19T10:21:20+00:00

TWL6040 provides GPO lines to be used for controlling external devices.The number
of lines different between versions: twl6040 have 3 GPO while TWL6041 have 1.

Signed-off-by: Sergio Aguirre 
Signed-off-by: Peter Ujfalusi 
Acked-by: Linus Walleij 
Signed-off-by: Samuel Ortiz

gpio: Add Avionic Design N-bit GPIO expander support

2012-09-18T21:27:25+00:00

This commit adds a driver for the Avionic Design N-bit GPIO expander.
The expander provides a variable number of GPIO pins with interrupt
support.

Changes in v2:
- allow building the driver as a module
- assign of_node unconditionally
- use linear mapping IRQ domain
- properly cleanup IRQ domain
- add OF device table and annotate device tables
- emulate rising and falling edge triggers
- increase #gpio-cells to 2
- drop support for !OF
- use IS_ENABLED to conditionalize DEBUG_FS code

Changes in v3:
- make IRQ support runtime configurable (interrupt-controller property)
- drop interrupt-controller and #interrupt-cells from DT binding
- add inline to_adnp() function to wrap container_of() macro
- consistently use adnp as name for struct adnp variables
- remove irq_mask_cur and rename irq_mask to irq_enable
- fix a subtle deadlock in adnp_gpio_direction_output()
- remove dynamic allocations from debugfs code
- rename regs to num_regs to avoid confusion
- annotate non-trivial code with comments
- don't acquire mutex in adnp_gpio_get()
- assume NO_IRQ == 0

Cc: Grant Likely 
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Linus Walleij 
Cc: linux-kernel@vger.kernel.org
Acked-by: Rob Herring 
Signed-off-by: Thierry Reding 
Signed-off-by: Linus Walleij

Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-07-30T19:41:17+00:00

Pull MFD bits from Samuel Ortiz:
 "We have support for a few new drivers:
   - Samsung s2mps11
   - Wolfson Microelectronics wm5102 and wm5110
   - Marvell 88PM800 and 88PM805
   - TI twl6041

  We also have our regular driver improvements:
   - Device tree and IRQ domain support for STE AB8500
   - Regmap and devm_* API conversion for TI tps6586x
   - Device tree support for Samsung max77686
   - devm_* API conversion for STE AB3100

  Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
  tps65090, da9052 and twl-core."

Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI:
centralize controller initialization") that clashed with commit
2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").

In particular, commit 2761a6394516 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).

I left that part of commit 2761a6394516 just undone.

* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
  mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
  mfd: Arizone core should select MFD_CORE
  mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
  mfd: Add debug trace on entering and leaving arizone runtime suspend
  mfd: Correct tps65090 cell names
  mfd: Remove gpio support from tps6586x core driver
  ARM: tegra: defconfig: Enable tps6586x gpio
  gpio: tps6586x: Add gpio support through platform driver
  mfd: Cache tps6586x register through regmap
  mfd: Use regmap for tps6586x register access.
  mfd: Use devm managed resources for tps6586x
  input: Add onkey support for 88PM80X PMIC
  mfd: Add support for twl6041
  mfd: Fix twl6040 revision information
  mfd: Matches should be NULL when populate anatop child devices
  input: ab8500-ponkey: Create AB8500 domain IRQ mapping
  mfd: Add missing out of memory check for pcf50633
  Documentation: Describe the AB8500 Device Tree bindings
  mfd: Add tps65910 32-kHz-crystal-input init
  mfd: Drop modifying mc13xxx driver's id_table in probe
  ...

gpio: tps6586x: Add gpio support through platform driver

2012-07-24T22:36:54+00:00

Converting the gpio driver of tps6586x to a platform
driver in place of registering the gpio through core
driver.
The motivation of the change is:
- This is inline with the mfd drivers implementation.
- This will move the related gpio support to gpio driver
  folder where all gpio related drivers are available.
  This will be easy the maintenance and enhancement is
  anything done for gpio.
- The gpio functionality can be selected through config
  variable.

Signed-off-by: Laxman Dewangan 
Reviewed-by: Linus Walleij 
Signed-off-by: Samuel Ortiz

gpiolib: Add support for Wolfson Microelectronics Arizona class devices

2012-07-17T18:59:53+00:00

The Arizona class devices provide some GPIOs for use in the system. This
driver provides support for these via gpiolib. Currently interrupts are
not supported, normally the GPIOs are outputs only.

Signed-off-by: Mark Brown 
[Fold in WM5110 support patch]
Signed-off-by: Linus Walleij