linux-toradex.git/drivers/gpio/gpio-xilinx.c, branch v3.12.32 Linux kernel for Apalis and Colibri modules GPIO: xilinx: Use BIT macro 2013-06-17T05:47:33+00:00 Michal Simek michal.simek@xilinx.com 2013-06-03T12:31:19+00:00 9f7f0b2bbcff719233e6724d756a8c93d3285ade Use BIT macro from linux/bitops.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use BIT macro from linux/bitops.h.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO: xilinx: Use __raw_readl/__raw_writel IO functions 2013-06-17T05:46:18+00:00 Michal Simek michal.simek@xilinx.com 2013-06-03T12:31:18+00:00 cc090d61d1a88f30f2fb75a91bce684ad1bd2e94 This driver can be used on Xilinx ARM Zynq platform where in_be32/out_be32 functions are not implemented. Use __raw_readl/__raw_writel functions which are implemented on Microblaze and PowerPC. For ARM readl/writel functions are used instead. The correct way how to implement this is to detect endians directly on IP. But for the gpio case without interrupt connected(it means without interrupt logic) there are just 2 registers data and tristate where auto detection can't be done. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This driver can be used on Xilinx ARM Zynq platform
where in_be32/out_be32 functions are not implemented.
Use __raw_readl/__raw_writel functions which are
implemented on Microblaze and PowerPC.
For ARM readl/writel functions are used instead.

The correct way how to implement this is to detect
endians directly on IP. But for the gpio case
without interrupt connected(it means without
interrupt logic) there are just 2 registers
data and tristate where auto detection can't be done.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO: xilinx: Add support for dual channel 2013-06-17T05:42:30+00:00 Michal Simek michal.simek@xilinx.com 2013-06-03T12:31:17+00:00 74600ee017557b2ebb669e45237f655e9e2fbac8 Supporting the second channel in the driver. Offset is 0x8 and both channnels share the same IRQ. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Supporting the second channel in the driver.
Offset is 0x8 and both channnels share the same
IRQ.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO: xilinx: Simplify driver probe function 2013-06-17T05:38:50+00:00 Michal Simek michal.simek@xilinx.com 2013-06-03T12:31:16+00:00 6f8bf50031a68f533ae7eba3d3277c38ee7806f5 Simplification is done by using OF helper function which increase readability of code and remove (if (var) var = be32_to_cpup;) assignment. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Simplification is done by using OF helper function
which increase readability of code and remove
(if (var) var = be32_to_cpup;) assignment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: remove use of __devinitdata 2012-11-28T19:39:59+00:00 Bill Pemberton wfp5p@virginia.edu 2012-11-19T18:24:14+00:00 aeca8ad1f0613a76a8f5fed174810fab9bc424cf CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: remove use of __devinit 2012-11-28T19:39:33+00:00 Bill Pemberton wfp5p@virginia.edu 2012-11-19T18:22:34+00:00 3836309d93462bbf34851c078be6e5e77d888e3d CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiolib: output basic details and consolidate gpio device drivers 2011-12-12T20:40:16+00:00 Grant Likely grant.likely@secretlab.ca 2011-11-06T18:36:18+00:00 64842aad5ec5ea3b6f6e716ce53a863f7c409da8 This patch adds a kernel message, containing GPIO range and device name on successful device registration, and removes duplicate messages from the following drivers: * gpio-adp5588 * gpio-bt8xx * gpio-cs5535 * gpio-janz-ttl * gpio-nomadik * gpio-pcf857x * gpio-xilinx * drivers/of/gpio.c Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> [grant.likely@secretlab.ca: squashed 2 patches together] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 
This patch adds a kernel message, containing GPIO range and device
name on successful device registration, and removes duplicate messages from the following drivers:
	* gpio-adp5588
	* gpio-bt8xx
	* gpio-cs5535
	* gpio-janz-ttl
	* gpio-nomadik
	* gpio-pcf857x
	* gpio-xilinx
	* drivers/of/gpio.c

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[grant.likely@secretlab.ca: squashed 2 patches together]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
drivers/gpio: Fix drivers who are implicit users of module.h 2011-10-31T23:31:47+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2011-07-03T17:38:09+00:00 bb207ef1e84ffc4afe89f3a5b84788bac0f968e7 A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in gpio
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
gpio: reorganize drivers 2011-06-06T16:10:11+00:00 Grant Likely grant.likely@secretlab.ca 2011-06-05T00:38:28+00:00 c103de240439dfee24ac50eb99c8be3a30d13323 Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 
Sort the gpio makefile and enforce the naming convention gpio-*.c for
gpio drivers.

v2: cleaned up filenames in Kconfig and comment blocks
v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>