linux-toradex.git/drivers/gpio, branch v5.0-rc6 Linux kernel for Apalis and Colibri modules gpio: vf610: Mask all GPIO interrupts 2019-01-28T14:28:43+00:00 Andrew Lunn andrew@lunn.ch 2019-01-27T21:58:00+00:00 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.

Disable all GPIO interrupts before registering the GPIO IRQ chip.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: altera-a10sr: Set proper output level for direction_output 2019-01-23T16:24:02+00:00 Axel Lin axel.lin@ingics.com 2019-01-23T00:00:57+00:00 2095a45e345e669ea77a9b34bdd7de5ceb422f93 The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
The altr_a10sr_gpio_direction_output should set proper output level
based on the value argument.

Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: sprd: Fix incorrect irq type setting for the async EIC 2019-01-23T16:24:01+00:00 Neo Hou neo.hou@unisoc.com 2019-01-16T05:06:14+00:00 f785ffb61605734b518afa766d1b5445e9f38c8d When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the
SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals.

Thus this patch fixes the issue.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Neo Hou <neo.hou@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: sprd: Fix the incorrect data register 2019-01-23T16:24:01+00:00 Neo Hou neo.hou@unisoc.com 2019-01-16T05:06:13+00:00 09d158d52d2bceda736797a61b6c13d7fc83707b Since differnt type EICs have its own data register to read, thus fix the incorrect data register. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
Since differnt type EICs have its own data register to read, thus fix the
incorrect data register.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Neo Hou <neo.hou@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpiolib: fix line event timestamps for nested irqs 2019-01-23T16:24:01+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2019-01-04T10:24:20+00:00 1033be58992f818dc564196ded2bcc3f360bc297 Nested interrupts run inside the calling thread's context and the top half handler is never called which means that we never read the timestamp. This issue came up when trying to read line events from a gpiochip using regmap_irq_chip for interrupts. Fix it by reading the timestamp from the irq thread function if it's still 0 by the time the second handler is called. Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
Nested interrupts run inside the calling thread's context and the top
half handler is never called which means that we never read the
timestamp.

This issue came up when trying to read line events from a gpiochip
using regmap_irq_chip for interrupts.

Fix it by reading the timestamp from the irq thread function if it's
still 0 by the time the second handler is called.

Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: pcf857x: Fix interrupts on multiple instances 2019-01-23T16:24:01+00:00 Roger Quadros rogerq@ti.com 2019-01-09T09:11:24+00:00 2486e67374aa8b7854c2de32869642c2873b3d53 When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
When multiple instances of pcf857x chips are present, a fix up
message [1] is printed during the probe of the 2nd and later
instances.

The issue is that the driver is using the same irq_chip data
structure between multiple instances.

Fix this by allocating the irq_chip data structure per instance.

[1] fix up message addressed by this patch
[    1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static 2019-01-11T08:16:40+00:00 Wei Yongjun weiyongjun1@huawei.com 2019-01-10T14:07:42+00:00 d04e779fb1dbeedf8a60b66d0d0048be4e65d366 Fixes the following sparse warning: drivers/gpio/gpio-pca953x.c:292:28: warning: symbol 'pca953x_i2c_regmap' was not declared. Should it be static? Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Fixes the following sparse warning:

drivers/gpio/gpio-pca953x.c:292:28: warning:
 symbol 'pca953x_i2c_regmap' was not declared. Should it be static?

Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts 2019-01-07T08:23:23+00:00 Hans de Goede hdegoede@redhat.com 2018-11-28T16:57:56+00:00 862523297778775a0543110dcbf2ca832782f675 acpi_gpiochip_alloc_event only continues allocating an event and adding it to the list if gpiochip_request_own_desc does not return an error. So events with an error desc are never placed on the events list and this check is really not necessary. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
acpi_gpiochip_alloc_event only continues allocating an event and adding
it to the list if gpiochip_request_own_desc does not return an error.
So events with an error desc are never placed on the events list and this
check is really not necessary.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio 2018-12-29T04:00:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-29T04:00:21+00:00 24dc83635ffe3c93d8122099a83ee228c9b7e4f7 Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ... 
Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.21 kernel series.

  Core changes:

   - Some core changes are already in outside of this pull request as
     they came through the regulator tree, most notably
     devm_gpiod_unhinge() that removes devres refcount management from a
     GPIO descriptor. This is needed in subsystems such as regulators
     where the regulator core need to take over the reference counting
     and lifecycle management for a GPIO descriptor.

   - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as
     nothing needs it. We can bring it back if need be.

   - Add a global TODO so people see where we are going. This helps
     setting the direction now that we are two GPIO maintainers.

   - Handle the MMC CD/WP properties in the device tree core. (The bulk
     of patches activating this code is already merged through the
     MMC/SD tree.)

   - Augment gpiochip_request_own_desc() to pass a flag so we as
     gpiochips can request lines as active low or open drain etc even
     from ourselves.

  New drivers:

   - New driver for Cadence GPIO blocks.

   - New driver for Atmel SAMA5D2 PIOBU GPIO lines.

  Driver improvements:

   - A major refactoring of the PCA953x driver - this driver has been
     around for ages, and is now modernized to reduce code duplication
     that has stacked up and is using regmap to read write and cache
     registers.

   - Intel drivers are now maintained in a separate tree and start with
     a round of cleanups and unifications"

* tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits)
  gpio: sama5d2-piobu: Depend on OF_GPIO
  gpio: Add Cadence GPIO driver
  dt-bindings: gpio: Add bindings for Cadence GPIO
  gpiolib-acpi: remove unused variable 'err', cleans up build warning
  gpio: mxs: read pin level directly instead of using .get
  gpio: aspeed: remove duplicated statement
  gpio: add driver for SAMA5D2 PIOBU pins
  dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller
  gpio/mmc/of: Respect polarity in the device tree
  dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support
  memory: omap-gpmc: Get the header of the enum
  ARM: omap1: Fix new user of gpiochip_request_own_desc()
  gpio: pca953x: Add regmap dependency for PCA953x driver
  gpio: raspberrypi-exp: decrease refcount on firmware dt node
  gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
  gpio: pca953x: Restore registers after suspend/resume cycle
  gpio: pca953x: Zap single use of pca953x_read_single()
  gpio: pca953x: Zap ad-hoc reg_output cache
  gpio: pca953x: Zap ad-hoc reg_direction cache
  gpio: pca953x: Perform basic regmap conversion
  ...
Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 2018-12-29T00:52:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-29T00:52:18+00:00 00d59fde8532b2d42e80909d2e58678755e04da9 Pull MMC updates from Ulf Hansson: "This time, this pull request contains changes crossing subsystems and archs/platforms, which is mainly because of a bigger modernization of moving from legacy GPIO to GPIO descriptors for MMC (by Linus Walleij). Additionally, once again, I am funneling changes to drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree, mostly due to that we lack a maintainer for these. Summary: MMC core: - Cleanup BKOPS support - Introduce MMC_CAP_SYNC_RUNTIME_PM - slot-gpio: Delete legacy slot GPIO handling MMC host: - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader - bcm2835: Several improvements to better recover from errors - jz4740: Rework and fixup pre|post_req support - mediatek: Add support for SDIO IRQs - meson-gx: Improve clock phase management - meson-gx: Stop descriptor on errors - mmci: Complete the sbc error path by sending a stop command - renesas_sdhi/tmio: Fixup reset/resume operations - renesas_sdhi: Add support for r8a774c0 and R7S9210 - renesas_sdhi: Whitelist R8A77990 SDHI - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W - rtsx_usb_sdmmc: Re-work card detection/removal support - rtsx_usb_sdmmc: Re-work runtime PM support - sdhci: Fix timeout loops for some variant drivers - sdhci: Improve support for error handling due to failing commands - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs - sdhci-of-esdhc: Add support for eMMC HS400 mode - sdhci-omap: Fixup reset support - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200 - sdhci-msm: Fixup dynamical clock gating issues - various: Complete converting all hosts into using slot GPIO descriptors Other: - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors - Add new Alcor Micro cardreader PCI driver - Support runtime power management for memstick rtsx_usb_ms driver - Use USB remote wakeups for card detection for rtsx_usb misc driver" * tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits) mmc: mediatek: Add MMC_CAP_SDIO_IRQ support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support mmc: core: Cleanup BKOPS support mmc: core: Drop redundant check in mmc_send_hpi_cmd() mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) dt-bindings: sdhci-omap: Add note for cpu_thermal mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers mmc: sdhci: Add quirk to disable LED control mmc: mmci: add variant property to set command stop bit misc: alcor_pci: fix spelling mistake "invailid" -> "invalid" mmc: meson-gx: add signal resampling mmc: meson-gx: align default phase on soc vendor tree mmc: meson-gx: remove useless lock mmc: meson-gx: make sure the descriptor is stopped on errors mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65 dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs mmc: sdhci-msm: avoid unused function warning ... 
Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...