Pull DRM updates from Dave Airlie:
 "Like all good pull reqs this ends with a revert, so it must mean we
  tested it,

[ Ed. That's _one_ way of looking at it ]

  This pull is missing nouveau, Ben has been stuck trying to track down
  a very longstanding bug that revealed itself due to some other
  changes.  I've asked him to send you a direct pull request for nouveau
  once he cleans things up.  I'm away until Monday so don't want to
  delay things, you can make a decision on that when he sends it, I have
  my phone so I can ack things just not really merge much.

  It has one trivial conflict with your tree in armada_drv.c, and also
  the pull request contains some component changes that are already in
  your tree, the base tree from Russell went via Greg's tree already,
  but some stuff still shows up in here that doesn't when I merge my
  tree into yours.

  Otherwise all pretty standard graphics fare, one new driver and
  changes all over the place.

  New drivers:
   - sti kms driver for STMicroelectronics chipsets stih416 and stih407.

  core:
   - lots of cleanups to the drm core
   - DP MST helper code merged
   - universal cursor planes.
   - render nodes enabled by default

  panel:
   - better panel interfaces
   - new panel support
   - non-continuous cock advertising ability

  ttm:
   - shrinker fixes

  i915:
   - hopefully ditched UMS support
   - runtime pm fixes
   - psr tracking and locking - now enabled by default
   - userptr fixes
   - backlight brightness fixes
   - MST support merged
   - runtime PM for dpms
   - primary planes locking fixes
   - gen8 hw semaphore support
   - fbc fixes
   - runtime PM on SOix sleep state hw.
   - mmio base page flipping
   - lots of vlv/chv fixes.
   - universal cursor planes

  radeon:
   - Hawaii fixes
   - display scalar support for non-fixed mode displays
   - new firmware format support
   - dpm on more asics by default
   - GPUVM improvements
   - uncached and wc GTT buffers
   - BOs > visible VRAM

  exynos:
   - i80 interface support
   - module auto-loading
   - ipp driver consolidated.

  armada:
   - irq handling in crtc layer only
   - crtc renumbering
   - add component support
   - DT interaction changes.

  tegra:
   - load as module fixes
   - eDP bpp and sync polarity fixed
   - DSI non-continuous clock mode support
   - better support for importing buffers from nouveau

  msm:
   - mdp5/adq8084 v1.3 hw enablement
   - devicetree clk changse
   - ifc6410 board working

  tda998x:
   - component support
   - DT documentation update

  vmwgfx:
   - fix compat shader namespace"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits)
  Revert "drm: drop redundant drm_file->is_master"
  drm/panel: simple: Use devm_gpiod_get_optional()
  drm/dsi: Replace upcasting macro by function
  drm/panel: ld9040: Replace upcasting macro by function
  drm/exynos: dp: Modify driver to support drm_panel
  drm/exynos: Move DP setup into commit()
  drm/panel: simple: Add AUO B133HTN01 panel support
  drm/panel: simple: Support delays in panel functions
  drm/panel: simple: Add proper definition for prepare and unprepare
  drm/panel: s6e8aa0: Add proper definition for prepare and unprepare
  drm/panel: ld9040: Add proper definition for prepare and unprepare
  drm/tegra: Add support for panel prepare and unprepare routines
  drm/exynos: dsi: Add support for panel prepare and unprepare routines
  drm/exynos: dpi: Add support for panel prepare and unprepare routines
  drm/panel: simple: Add dummy prepare and unprepare routines
  drm/panel: s6e8aa0: Add dummy prepare and unprepare routines
  drm/panel: ld9040: Add dummy prepare and unprepare routines
  drm/panel: Provide convenience wrapper for .get_modes()
  drm/panel: add .prepare() and .unprepare() functions
  drm/panel: simple: Remove simple-panel compatible
  ...

Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: register crtc with port
  drm/armada: permit CRTCs to be registered as separate devices
  dt-bindings: add Marvell Dove LCD controller documentation
  drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock
  drm/armada: convert to componentized support
  drm: add of_graph endpoint helper to find possible CRTCs
  component: fix bug with legacy API
  drm/armada: make variant a CRTC thing
  drm/armada: move variant initialisation to CRTC init
  drm/armada: use number of CRTCs registered
  drm/armada: move IRQ handling into CRTC
  component: add support for component match array
  component: ignore multiple additions of the same component
  component: fix missed cleanup in case of devres failure

Register the CRTC with the port node so that the DRM OF helpers can
find the appropriate CRTC.  This is important so that encoders can
identify their corresponding possible CRTCs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Remove the underscore between "clk" and "1" so that we match the name
of the clock given in the documentation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Convert the Armada DRM driver to use the component helpers, which will
permit us to clean up the driver and move towards an implementation
which is compatible with a DT description of the hardware.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This allows reservation objects to be used in dma-buf. it's required
for implementing polling support on the fences that belong to a dma-buf.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/
Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.

At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.

Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There's no need for this to be modifiable. Make it const so that it can
be put into the .rodata section.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Move the variant pointer into the armada_crtc structure, and update for
the resulting changes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>