Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.5 kernel cycle

  Core changes:

   - Expose pull up/down flags for the GPIO character device to
     userspace.

     After clear input from the RaspberryPi and Beagle communities, it
     has been established that prototyping, industrial automation and
     make communities strongly need this feature, and as we want people
     to use the character device, we have implemented the simple pull
     up/down interface for GPIO lines.

     This means we can specify that a (chip-specific) pull up/down
     resistor can be enabled, but does not offer fine-grained control
     such as cases where the resistance of the same pull resistor can be
     controlled (yet).

   - Introduce devm_fwnode_gpiod_get_index() and start to phase out the
     old symbol devm_fwnode_get_index_gpiod_from_child().

   - A bit of documentation clean-up work.

   - Introduce a define for GPIO line directions and deploy it in all
     GPIO drivers in the drivers/gpio directory.

   - Add a special callback to populate pin ranges when cooperating with
     the pin control subsystem and registering ranges as part of adding
     a gpiolib driver and a gpio_irq_chip driver at the same time. This
     is also deployed in the Intel Merrifield driver.

  New drivers:

   - RDA Micro GPIO controller.

   - XGS-iproc GPIO driver.

  Driver improvements:

   - Wake event and debounce support on the Tegra 186 driver.

   - Finalize the Aspeed SGPIO driver.

   - MPC8xxx uses a normal IRQ handler rather than a chained handler"

* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
  gpio: Add TODO item for regmap helper
  Documentation: gpio: driver.rst: Fix warnings
  gpio: of: Fix bogus reference to gpiod_get_count()
  gpiolib: Grammar s/manager/managed/
  gpio: lynxpoint: Setup correct IRQ handlers
  MAINTAINERS: Replace my email by one @kernel.org
  gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
  gpio/mpc8xxx: fix qoriq GPIO reading
  gpio: mpc8xxx: Don't overwrite default irq_set_type callback
  gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  gpiolib: fix coding style in gpiod_hog()
  drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
  gpio: merrifield: Pass irqchip when adding gpiochip
  gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
  gpiolib: Introduce ->add_pin_ranges() callback
  gpio: mmio: remove untrue leftover comment
  gpio: em: Use platform_get_irq() to obtain interrupts
  gpio: tegra186: Add debounce support
  gpio: tegra186: Program interrupt route mapping
  gpio: tegra186: Derive register offsets from bank/port
  ...

Pull drm updates from Dave Airlie:
 "Lots of stuff in here, though it hasn't been too insane this merge
  apart from dealing with the security fun.

  uapi:
   - export different colorspace properties on DP vs HDMI
   - new fourcc for ARM 16x16 block format
   - syncobj: allow querying last submitted timeline value
   - DRM_FORMAT_BIG_ENDIAN defined as unsigned

  core:
   - allow using gem vma manager in ttm
   - connector/encoder/bridge doc fixes
   - allow more than 3 encoders for a connector
   - displayport mst suspend/resume reprobing support
   - vram lazy unmapping, uniform vram mm and gem vram
   - edid cleanups + AVI informframe bar info
   - displayport helpers - dpcd parser added

  dp_cec:
   - Allow a connector to be associated with a cec device

  ttm:
   - pipelining with no_gpu_wait fix
   - always keep BOs on the LRU

  sched:
   - allow free_job routine to sleep

  i915:
   - Block userptr from mappable GTT
   - i915 perf uapi versioning
   - OA stream dynamic reconfiguration
   - make context persistence optional
   - introduce DRM_I915_UNSTABLE Kconfig
   - add fake lmem testing under unstable
   - BT.2020 support for DP MSA
   - struct mutex elimination
   - Tigerlake display/PLL/power management improvements
   - Jasper Lake PCH support
   - refactor PMU for multiple GPUs
   - Icelake firmware update
   - Split out vga + switcheroo code

  amdgpu:
   - implement dma-buf import/export without helpers
   - vega20 RAS enablement
   - DC i2c over aux fixes
   - renoir GPU reset
   - DC HDCP support
   - BACO support for CI/VI asics
   - MSI-X support
   - Arcturus EEPROM support
   - Arcturus VCN encode support
   - VCN dynamic powergating on RV/RV2

  amdkfd:
   - add navi12/14/renoir support to kfd

  radeon:
   - SI dpm fix ported from amdgpu
   - fix bad DMA on ppc platforms

  gma500:
   - memory leak fixes

  qxl:
   - convert to new gem mmap

  exynos:
   - build warning fix

  komeda:
   - add aclk sysfs attribute

  v3d:
   - userspace cleanup uapi change

  i810:
   - fix for underflow in dispatch ioctls

  ast:
   - refactor show_cursor

  mgag200:
   - refactor show_cursor

  arcgpu:
   - encoder finding improvements

  mediatek:
   - mipi_tx, dsi and partial crtc support for MT8183 SoC
   - rotation support

  meson:
   - add suspend/resume support

  omap:
   - misc refactors

  tegra:
   - DisplayPort support for Tegra 210, 186 and 194.
   - IOMMU-backed DMA API fixes

  panfrost:
   - fix lockdep issue
   - simplify devfreq integration

  rcar-du:
   - R8A774B1 SoC support
   - fixes for H2 ES2.0

  sun4i:
   - vcc-dsi regulator support

  virtio-gpu:
   - vmexit vs spinlock fix
   - move to gem shmem helpers
   - handle large command buffers with cma"

* tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits)
  drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
  drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
  drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
  drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
  drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
  merge fix for "ftrace: Rework event_create_dir()"
  drm/amdgpu: Update Arcturus golden registers
  drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access
  drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
  Revert "drm/amd/display: enable S/G for RAVEN chip"
  drm/amdgpu: disable gfxoff on original raven
  drm/amdgpu: remove experimental flag for Navi14
  drm/amdgpu: disable gfxoff when using register read interface
  drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
  drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
  drm/radeon: fix bad DMA from INTERRUPT_CNTL2
  drm/amd/display: Fix debugfs on MST connectors
  drm/amdgpu/nv: add asic func for fetching vbios from rom directly
  drm/amdgpu: put flush_delayed_work at first
  drm/amdgpu/vcn2.5: fix the enc loop with hw fini
  ...

Instead of fwnode_get_named_gpiod() that I plan to hide away, let's use
the new fwnode_gpiod_get_index() that mimics gpiod_get_index(), but
works with arbitrary firmware node.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Allow codec driver register callback function for plug event.

The callback registration flow:
dw-hdmi <--- hw-hdmi-i2s-audio <--- hdmi-codec

dw-hdmi-i2s-audio implements hook_plugged_cb op
so codec driver can register the callback.

dw-hdmi exports a function dw_hdmi_set_plugged_cb so platform device
can register the callback.

When connector plug/unplug event happens, report this event using the
callback.

Make sure that audio and drm are using the single source of truth for
connector status.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-2-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

The DP specification uses the term "default framing" instead of "non-
enhanced framing".

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-11-thierry.reding@gmail.com

During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.

v3: make link rate unsigned int to avoid overflow

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-10-thierry.reding@gmail.com

During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.

v4: use bulk DPCD writes if possible (Daniel Vetter)

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022145211.2258525-1-thierry.reding@gmail.com

Parroting Daniel's backmerge justification from
2e79e22e092acd55da0b2db066e4826d7d152c41:

Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.

Some adjacent changes conflicts, plus some clashes in i915 due to
cherry-picking and git trying to be helpful and leaving both versions
in.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>