linux-toradex.git/drivers/gpu/drm/i915/intel_dp.c, branch v3.4.10

drm/i915: reorder edp disabling to fix ivb MacBook Air

2012-08-26T22:00:40+00:00

commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 upstream.

eDP is tons of fun. It turns out that at least the new MacBook Air 5,1
model absolutely doesn't like the new force vdd dance we've introduced
in

commit 6cb49835da0426f69a2931bc2a0a8156344b0e41
Author: Daniel Vetter 
Date:   Sun May 20 17:14:50 2012 +0200

    drm/i915: enable vdd when switching off the eDP panel

But that patch also tried to fix some neat edp sequence issue with the
force_vdd timings. Closer inspection reveals that we've raised
force_vdd only to do the aux channel communication dp_sink_dpms. If we
move the edp_panel_off below that, we don't need any force_vdd for the
disable sequence, which makes the Air happy.

Unfortunately the reporter of the original bug that the above commit
fixed is travelling, so we can't test whether this regresses things.
But my theory is that since we don't check for any power-off ->
force_vdd-on delays in edp_panel_vdd_on, this was the actual
root-cause of this failure. With that force_vdd dance completely
eliminated, I'm hopeful the original bug stays fixed, too.

For reference the old bug, which hopefully doesn't get broken by this:

https://bugzilla.kernel.org/show_bug.cgi?id=43163

In any case, regression fixers win over plain bugfixes, so this needs
to go in asap.

v2: The crucial pieces seems to be to clear the force_vdd flag
uncoditionally, too, in edp_panel_off. Looks like this is left behind
by the firmware somehow.

v3: The Apple firmware seems to switch off the panel on it's own, hence
we still need to keep force_vdd on, but properly clear it when switching
the panel off.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671
Tested-by: Roberto Romer 
Tested-by: Daniel Wagner 
Tested-by: Keith Packard 
Cc: Keith Packard 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: prefer wide & slow to fast & narrow in DP configs

2012-08-26T22:00:40+00:00

commit 2514bc510d0c3aadcc5204056bb440fa36845147 upstream.

High frequency link configurations have the potential to cause trouble
with long and/or cheap cables, so prefer slow and wide configurations
instead.  This patch has the potential to cause trouble for eDP
configurations that lie about available lanes, so if we run into that we
can make it conditional on eDP.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801
Tested-by: peter@colberg.org
Signed-off-by: Jesse Barnes 
Signed-off-by: Daniel Vetter 
Cc: Jonathan Nieder 
Signed-off-by: Greg Kroah-Hartman

Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"

2012-06-22T18:36:52+00:00

commit 6b4e0a93ff6e45714c72bdce193f719ed94810e3 upstream.

This reverts commit 092945e11c5b84f66dd08f0b87fb729715d377bc.

This commit prevents a DP screen from properly training the link.
Oddly enough it works, once the machine has been warm-booted with an
older kernel.

According to DP docs this _should_ have been the right precharge time.
Also, the commit that originally introduces this was just general snb
DP enabling and didn't mention any specific reason for this special
value. Whatever, trust the reporter that this makes things worse and
let's just revert it.

v2: Less spelling fail.

Reviewed-by: Adam Jackson 
Cc: Jesse Barnes 
Reported-by: "Wouter M. Koolen" 
Buglink: https://lkml.org/lkml/2012/6/14/301
Signed-Off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: enable vdd when switching off the eDP panel

2012-06-09T15:36:19+00:00

commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 upstream.

We have one bug report from a validation team that we get the eDP
panel sequencing still somewhat wrong: We need to enable VDD while
switching off the panel and backlight. Unfortunately that reporter
seems to have fallen off the earth :(

For another reporter this actually fixes a black panel issue because
without this the backlight/panel gets confused and doesn't light up
again.

v2: I've forgotten to remove the vdd_off call in panel_off which is
now bogus. This essentially reverts

commit 17038de5f16569a25343cf68668f3b657eafb00e
Author: Chris Wilson 
Date:   Mon Apr 16 22:43:42 2012 +0100

    drm/i915/dp: Flush any outstanding work to turn the VDD off

v3: the current panel_off code forces off the vdd power, too. Which is
bogus and resulted in some funny warnings later on when we've tried to
do aux channel communications with just the vdd forced on. Fix this,
too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46312
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43163
Tested-by: Vincent Frentzel 
Reviewed-by: Jesse Barnes 
Signed-Off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915/dp: Flush any outstanding work to turn the VDD off

2012-06-09T15:36:19+00:00

commit 17038de5f16569a25343cf68668f3b657eafb00e upstream.

As we may kick off a delayed workqueue task to switch of the VDD lines, we
need to complete that task prior to turning off the panel (which itself
depends upon VDD being off).

v2: Don't cancel the outstanding work as this may trigger a deadlock

Signed-off-by: Chris Wilson 
Cc: Keith Packard 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: properly compute dp dithering for user-created modes

2012-04-10T17:23:02+00:00

We've only computed whether we need to fall back to 6bpc due to dp
link bandwidth constrains in mode_valid, but not mode_fixup. Under
various circumstances X likes to create new modes which then lack
proper 6bpc flags (if required), resulting in mode_fixup failures and
ultimately black screens.

Chris Wilson pointed out that we still get things wrong for bpp > 24,
but that should be fixed in another patch (and it'll be easier because
this patch consolidates the logic).

The likely culprit for this regression is

commit 3d794f87238f74d80e78a7611c7fbde8a54c85c2
Author: Keith Packard 
Date:   Wed Jan 25 08:16:25 2012 -0800

    drm/i915: Force explicit bpp selection for intel_dp_link_required

v2: Fix indentation and tune down the too bold claim that this should
fix the world. Both noticed by Chris Wilson.

v3: Try to really git add things.

Reported-and-tested-by: Brice Goglin 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48170
Cc: stable@kernel.org
Reviewed-by: Adam Jackson 
Signed-Off-by: Daniel Vetter

drm/i915: use the new hdmi_force_audio enum more

2012-02-27T16:45:36+00:00

While fixing up a merge conflict with drm-next I've noticed that we
use the same audio drm connector property also for dp and sdvo
outputs.

So put the new enum to some good use and convert these paths, too. The
HDMI_AUDIO_ prefix is a bit a misnomer. But at least for sdvo it makes
sense (and you can also connect a hdmi monitor with a dp->hdmi cable),
so I've decided to stick with it.

Reviewed-by: Chris Wilson 
Reviewed-by: Wu Fengguang 
Signed-Off-by: Daniel Vetter

Merge remote-tracking branch 'airlied/drm-fixes' into drm-intel-next-queued

2012-02-10T16:14:49+00:00

Back-merge from drm-fixes into drm-intel-next to sort out two things:

- interlaced support: -fixes contains a bugfix to correctly clear
  interlaced configuration bits in case the bios sets up an interlaced
  mode and we want to set up the progressive mode (current kernels
  don't support interlaced). The actual feature work to support
  interlaced depends upon (and conflicts with) this bugfix.

- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
  this for ivybridge, but some recent bug reports indicate that we
  need this on Sandybridge, too. But in a slightly different flavour
  and with other fixes and reworks on top. Additionally there are some
  forcewake cleanup patches heading to -next that would conflict with
  currrent -fixes.

Signed-Off-by: Daniel Vetter

drm/i915: Force explicit bpp selection for intel_dp_link_required

2012-02-06T22:34:29+00:00

It is never correct to use intel_crtc->bpp in intel_dp_link_required,
so instead pass an explicit bpp in to this function. This patch
only supports 18bpp and 24bpp modes, which means that 10bpc modes will
be computed incorrectly. Fixing that will require more extensive
changes, and so must be addressed separately from this bugfix.

intel_dp_link_required is called from intel_dp_mode_valid and
intel_dp_mode_fixup.

* intel_dp_mode_valid is called to list supported modes; in this case,
  the current crtc values cannot be relevant as the modes in question
  may never be selected. Thus, using intel_crtc->bpp is never right.

* intel_dp_mode_fixup is called during mode setting, but it is run
  well before ironlake_crtc_mode_set is called to set intel_crtc->bpp,
  so using intel_crtc-bpp in this path can only ever get a stale
  value.

Cc: Lubos Kolouch 
Cc: Adam Jackson 
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42263
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44881
Tested-by: Dave Airlie 
Tested-by: camalot@picnicpark.org (Dell Latitude 6510)
Tested-by: Roland Dreier 
Signed-off-by: Keith Packard

drm/i915/dp: Check for AUXCH error before checking for success

2012-01-17T15:47:00+00:00

This is paranoid, but I am entirely willing to believe the hardware
could come up with a condition where I get a status with both the 'done'
and 'receive error' bits set.

Signed-off-by: Adam Jackson 
Acked-by: Jesse Barnes 
Signed-off-by: Daniel Vetter