This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.

v2: remove unneeded ERROR, fix | vs ||

Signed-off-by: Dave Airlie <airlied@redhat.com>

It will help future code if this function knows something about of the context
of the display setup object is being pinned for.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This gets us out of our init code and out to userspace quite a bit
faster, but does open us up to some bugs given the state of our init
time locking.

v2: switch to async_schedule (Chris)
    check with lockdep, seems happy (Jesse)
    move hotplug enable flag set to fbdev_initial_config (Jesse)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebase on top of the dev_priv->enable_hotplug_processing
removal.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In the move over to use BIOS connector configs, we lost the ability to
force a specific set of connectors on or off.  Try to remedy that by
dropping back to the old behavior if we detect a hard coded connector
config that tries to enable a connector (disabling is easy!).

Based on earlier patches by Jesse Barnes.

v2: Remove Jesse's patch

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Rather than take and release the console_lock() around a non-existent
DRM_I915_FBDEV, move the lock acquisation into the callee where it will
be compiled out by the config option entirely. This includes moving the
deferred fb_set_suspend() dance and encapsulating it entirely within
intel_fbdev.c.

v2: Use an integral work item so that we can explicitly flush the work
upon suspend/unload.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add the flush_work in fbdev_fini per the mailing list
discussion. And s/BUG_ON/WARN_ON/ because.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This chunk was no longer required from what I can see, or
at least it is doing the wrong thing, as I confused
intel_connector->encoder and connector->encoder. Drop it
for now, to remove the warnings at bootup.

Signed-off-by: Dave Airlie <airlied@redhat.com>

This adds DP 1.2 MST support on Haswell systems.

Notes:
a) this reworks irq handling for DP MST ports, so that we can
avoid the mode config locking in the current hpd handlers, as
we need to process up/down msgs at a better time.

Changes since v0.1:
use PORT_PCH_HOTPLUG to detect short vs long pulses
add a workqueue to deal with digital events as they can get blocked on the
main workqueue beyong mode_config mutex
fix a bunch of modeset checker warnings
acks irqs in the driver
cleanup the MST encoders

Changes since v0.2:
check irq status again in work handler
move around bring up and tear down to fix DPMS on/off
use path properties.

Changes since v0.3:
updates for mst apis
more state checker fixes
irq handling improvements
fbcon handling support
improved reference counting of link - fixes redocking.

Changes since v0.4:
handle gpu reset hpd reinit without oopsing
check link status on HPD irqs
fix suspend/resume

Changes since v0.5:
use proper functions to get max link/lane counts
fix another checker backtrace - due to connectors disappearing.
set output type in more places fro, unknown->displayport
don't talk to devices if no HPD asserted
check mst on short irqs only
check link status properly
rebase onto prepping irq changes.
drop unsued force_act

Changes since v0.6:
cleanup unused struct entry.

[airlied: fix some sparse warnings].

Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- fbc improvements when stolen memory is tight (Ben)
- cdclk handling improvements for vlv/chv (Ville)
- proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert
  Eich)
- gen8 hw semaphore support (Ben)
- more execlist prep work from Oscar Mateo
- locking fixes for primary planes (Matt Roper)
- code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but
  not yet enabled because some fixes from Paulo haven't made the cut
- more gpu boost tuning from Chris
- as usual piles of little things all over

* tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits)
  drm/i915: Make the RPS interrupt generation mask handle the vlv wa
  drm/i915: Move RPS evaluation interval counters to i915->rps
  drm/i915: Don't cast a pointer to void* unnecessarily
  drm/i915: don't read LVDS regs at compute_config time
  drm/i915: check the power domains in intel_lvds_get_hw_state()
  drm/i915: check the power domains in ironlake_get_pipe_config()
  drm/i915: don't skip shared DPLL assertion on LPT
  drm/i915: Only touch WRPLL hw state in enable/disable hooks
  drm/i915: Switch to common shared dpll framework for WRPLLs
  drm/i915: ->enable hook for WRPLLs
  drm/i915: ->disable hook for WRPLLs
  drm/i915: State readout support for WRPLLs
  drm/i915: add POWER_DOMAIN_PLLS
  drm/i915: Document that the pll->mode_set hook is optional
  drm/i915: Basic shared dpll support for WRPLLs
  drm/i915: Precompute static ddi_pll_sel values in encoders
  drm/i915: BDW also has special-purpose DP DDI clocks
  drm/i915: State readout and cross-checking for ddi_pll_sel
  drm/i915: Move ddi_pll_sel into the pipe config
  drm/i915: Add a debugfs file for the shared dpll state
  ...

- Accurate frontbuffer tracking and frontbuffer rendering invalidate, flush and
  flip events. This is prep work for proper PSR support and should also be
  useful for DRRS&fbc.
- Runtime suspend hardware on system suspend to support the new SOix sleep
  states, from Jesse.
- PSR updates for broadwell (Rodrigo)
- Universal plane support for cursors (Matt Roper), including core drm patches.
- Prefault gtt mappings (Chris)
- baytrail write-enable pte bit support (Akash Goel)
- mmio based flips (Sourab Gupta) instead of blitter ring flips
- interrupt handling race fixes (Oscar Mateo)

And old, not yet merged features from the previous round:
- rps/turbo support for chv (Deepak)
- some other straggling chv patches (Ville)
- proper universal plane conversion for the primary plane (Matt Roper)
- ppgtt on vlv from Jesse
- pile of cleanups, little fixes for insane corner cases and improved debug
  support all over

* tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel: (99 commits)
  drm/i915: Update DRIVER_DATE to 20140620
  drivers/i915: Fix unnoticed failure of init_ring_common()
  drm/i915: Track frontbuffer invalidation/flushing
  drm/i915: Use new frontbuffer bits to increase pll clock
  drm/i915: don't take runtime PM reference around freeze/thaw
  drm/i915: use runtime irq suspend/resume in freeze/thaw
  drm/i915: Properly track domain of the fbcon fb
  drm/i915: Print obj->frontbuffer_bits in debugfs output
  drm/i915: Introduce accurate frontbuffer tracking
  drm/i915: Drop schedule_back from psr_exit
  drm/i915: Ditch intel_edp_psr_update
  drm/i915: Drop unecessary complexity from psr_inactivate
  drm/i915: Remove ctx->last_ring
  drm/i915/chv: Ack interrupts before handling them (CHV)
  drm/i915/bdw: Ack interrupts before handling them (GEN8)
  drm/i915/vlv: Ack interrupts before handling them (VLV)
  drm/i915: Ack interrupts before handling them (GEN5 - GEN7)
  drm/i915: Don't BUG_ON in i915_gem_obj_offset
  drm/i915: Grab dev->struct_mutex in i915_gem_pageflip_info
  drm/i915: Add some L3 registers to the parser whitelist
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_drv.c

To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.

At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.

Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>