linux-toradex.git/drivers/gpu/drm/i915/intel_sdvo.c, branch v3.4.2

drm/i915: properly handle interlaced bit for sdvo dtd conversion

2012-06-09T15:36:10+00:00

commit 59d92bfa5f0cdf57f82f5181b0ad6af75c3fdf41 upstream.

We've simply ignored this, which isn't too great. With this, interlaced
1080i works on my HDMI screen connected through sdvo. For no apparent
reason anything else still doesn't work as it should.

While at it, give these magic numbers in the dtd proper names and
add a comment that they match with EDID detailed timings.

v2: Actually use the right bit for interlaced.

Tested-by: Peter Ross 
Reviewed-by: Paulo Zanoni 
Signed-Off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: disable sdvo hotplug on i945g/gm

2012-05-07T08:37:56+00:00

Chris Wilson dug out a hw erratum saying that there's noise on the
interrupt line on i945G chips. We also have a bug report from a i945GM
chip with an sdvo hotplug interrupt storm (and no apparent cause).

Play it safe and disable sdvo hotplug on all i945 variants.

Note that this is a regression that has been introduced in 3.1,
when we've enabled sdvo hotplug support with

commit cc68c81aed7d892deaf12d720d5455208e94cd0a
Author: Simon Farnsworth 
Date:   Wed Sep 21 17:13:30 2011 +0100

    drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI

Cc: stable@kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Reported-and-tested-by: Dominik Köppl 
Reviewed-by: Chris Wilson 
Signed-Off-by: Daniel Vetter

drm/i915: handle input/output sdvo timings separately in mode_set

2012-04-26T16:56:26+00:00

We seem to have a decent confusion between the output timings and the
input timings of the sdvo encoder. If I understand the code correctly,
we use the original mode unchanged for the output timings, safe for
the lvds case. And we should use the adjusted mode for input timings.

Clarify the situation by adding an explicit output_dtd to the sdvo
mode_set function and streamline the code-flow by moving the input and
output mode setting in the sdvo encode together.

Furthermore testing showed that the sdvo input timing needs the
unadjusted dotclock, the sdvo chip will automatically compute the
required pixel multiplier to get a dotclock above 100 MHz.

Fix this up when converting a drm mode to an sdvo dtd.

This regression was introduced in

commit c74696b9c890074c1e1ee3d7496fc71eb3680ced
Author: Pavel Roskin 
Date:   Thu Sep 2 14:46:34 2010 -0400

    i915: revert some checks added by commit 32aad86f

particularly the following hunk:

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
b/drivers/gpu/drm/i915/intel_sdvo.c
index 093e914..62d22ae 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,

     /* We have tried to get input timing in mode_fixup, and filled into
        adjusted_mode */
-    if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
-        intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+    intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+    if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
         input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags;
-    } else
-        intel_sdvo_get_dtd_from_mode(&input_dtd, mode);

     /* If it's a TV, we already set the output timing in mode_fixup.
      * Otherwise, the output timing is equal to the input timing.

Due to questions raised in review, below a more elaborate analysis of
the bug at hand:

Sdvo seems to have two timings, one is the output timing which will be
sent over whatever is connected on the other side of the sdvo chip (panel,
hdmi screen, tv), the other is the input timing which will be generated by
the gmch pipe. It looks like sdvo is expected to scale between the two.

To make things slightly more complicated, we have a bunch of special
cases:
- For lvds panel we always use a fixed output timing, namely
  intel_sdvo->sdvo_lvds_fixed_mode, hence that special case.
- Sdvo has an interface to generate a preferred input timing for a given
  output timing. This is the confusing thing that I've tried to clear up
  with the follow-on patches.
- A special requirement is that the input pixel clock needs to be between
  100MHz and 200MHz (likely to keep it within the electromechanical design
  range of PCIe), 270MHz on later gen4+. Lower pixel clocks are
  doubled/quadrupled.

The thing this patch tries to fix is that the pipe needs to be
explicitly instructed to double/quadruple the pixels and needs the
correspondingly higher pixel clock, whereas the sdvo adaptor seems to
do that itself and needs the unadjusted pixel clock. For the sdvo
encode side we already set the pixel mutliplier with a different
command (0x21).

This patch tries to fix this mess by:
- Keeping the output mode timing in the unadjusted plain mode, safe
  for the lvds case.
- Storing the input timing in the adjusted_mode with the adjusted
  pixel clock. This way we don't need to frob around with the core
  crtc mode set code.
- Fixing up the pixelclock when constructing the sdvo dtd timing
  struct. This is why the first hunk of the patch is an integral part
  of the series.
- Dropping the is_tv special case because input_dtd is equivalent to
  adjusted_mode after these changes. Follow-up patches clear this up
  further (by simply ripping out intel_sdvo->input_dtd because it's
  not needed).

v2: Extend commit message with an in-depth bug analysis.

Reported-and-Tested-by: Bernard Blackham 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157
Reviewed-by: Jesse Barnes 
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter

drm/i915: use the new hdmi_force_audio enum more

2012-02-27T16:45:36+00:00

While fixing up a merge conflict with drm-next I've noticed that we
use the same audio drm connector property also for dp and sdvo
outputs.

So put the new enum to some good use and convert these paths, too. The
HDMI_AUDIO_ prefix is a bit a misnomer. But at least for sdvo it makes
sense (and you can also connect a hdmi monitor with a dp->hdmi cable),
so I've decided to stick with it.

Reviewed-by: Chris Wilson 
Reviewed-by: Wu Fengguang 
Signed-Off-by: Daniel Vetter

Merge remote-tracking branch 'airlied/drm-next' into for-airlied

2012-02-23T13:56:11+00:00

Manually resolve the conflict between the new enum drm property
helpers in drm-next and the new "force-dvi" option that the "audio" output
property gained in drm-intel-next.

While resolving this conflict, switch the new drm_prop_enum_list to
use the newly introduced enum defines instead of magic values.

Conflicts:
	drivers/gpu/drm/i915/intel_modes.c

Signed-Off-by: Daniel Vetter

drm/i915: allow interlaced mode output on the SDVO connector

2012-02-10T16:28:48+00:00

Signed-off-by: Peter Ross 
Reviewed-by: Eugeni Dodonov 
Reviewed-by: Paulo Zanoni 
Tested-by: Paulo Zanoni 
Tested-by: Christopher Egert 
Tested-by: Alfonso Fiore 
Signed-off-by: Daniel Vetter

drm/i915: fixup interlaced vertical timings confusion, part 1

2012-02-10T16:24:06+00:00

We have a pretty decent confusion about vertical timings of interlaced
modes. Peter Ross has written a patch that makes interlace modes work
on a lot more platforms/output combinations by doubling the vertical
timings.

The issue with that patch is that core drm _does_ support specifying
whether we want these vertical timings in fields or frames, we just
haven't managed to consistently use this facility. The relavant
function is drm_mode_set_crtcinfo, which fills in the crtc timing
information.

The first thing to note is that the drm core keeps interlaced modes in
frames, but displays modelines in fields. So when the crtc modeset
helper copies over the mode into adjusted_mode it will already contain
vertical timings in half-frames. The result is that the fixup code in
intel_crtc_mode_fixup doesn't actually do anything (in most cases at
least).

Now gen3+ natively supports interlaced modes and wants the vertical
timings in frames. Which is what sdvo already fixes up, at least under
some conditions.

There are a few other place that demand vertical timings in fields
but never actually deal with interlaced modes, so use frame timings
for consistency, too. These are:
- lvds panel,
- dvo encoders - dvo is the only way gen2 could support interlaced
  mode, but currently we don't support any encoders that do.
- tv out - despite that the tv dac sends out an interlaced signal it
  expects a progressive mode pipe configuration.
All these encoders enforce progressive modes by resetting
interlace_allowed.

Hence we always want crtc vertical timings in frames. Enforce this in
our crtc mode_fixup function and rip out any redudant timing
computations from the encoders' mode_fixup function.

v2-4: Adjust the vertical timings a bit.

v5: Split out the 'subtract-one for interlaced' fixes.

v6: Clarify issues around tv-out and gen2.

Reviewed-by: Eugeni Dodonov 
Reviewed-by: Paulo Zanoni 
Tested-by: Paulo Zanoni 
Tested-by: Christopher Egert 
Tested-by: Alfonso Fiore 
Signed-Off-by: Daniel Vetter

drm: add convenience function to create an range property

2012-02-09T10:15:25+00:00

Creating a range property is a common pattern, so create
a convenience function for this and use it where appropriate.

Signed-off-by: Sascha Hauer 
Signed-off-by: Dave Airlie

drm/i915/sdvo: always set positive sync polarity

2012-01-06T22:11:17+00:00

This is a revert of 81a14b46846fea0741902e8d8dfcc6c6c78154c8.

We already set the mode polarity using the SDVO commands with struct
intel_sdvo_dtd. We have at least 3 bugs that get fixed with this patch.
The documentation, despite not clear, can also be interpreted in a way
that suggests this patch is needed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15766
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42174
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43333
Cc: stable@kernel.org
Reviewed-by: Eric Anholt 
Reviewed-by: Jesse Barnes 
Signed-off-by: Paulo Zanoni 
Signed-off-by: Keith Packard

drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check

2011-12-16T16:49:56+00:00

We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.

Fixes the detection of the secondary SDVO LVDS panel on the Libretto
W105.

Signed-off-by: Chris Wilson 
Reviewed-by: Adam Jackson 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216
Signed-off-by: Keith Packard