linux-toradex.git/drivers/gpu/drm/i915, branch v3.4.66

drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER

2013-10-05T14:06:54+00:00

commit 8d16f258217f2f583af1fd57c5144aa4bbe73e48 upstream.

There is no clear cut rules or specs for the retry interval, as there
are many factors that affect overall response time. Increase the
interval, and even more so on branch devices which may have limited i2c
bit rates.

Signed-off-by: Jani Nikula 
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=60263
Tested-by: Nicolas Suzor 
Reviewed-by: Todd Previte 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: ivb: fix edp voltage swing reg val

2013-09-08T04:58:15+00:00

commit 77fa4cbd5fa389e28419bbe8ac491b5fdd54840d upstream.

Fix the typo introduced in

commit 1a2eb4604b85c5efb343da8a4dcf41288fcfca85
Author: Keith Packard 
Date:   Wed Nov 16 16:26:07 2011 -0800

    drm/i915: Hook up Ivybridge eDP

This fixes eDP link-training failures and cases where all voltage swing
/pre-emphasis levels were tried and failed during clock recovery and -
as a fallback - we go on to do channel equalization with the last voltage
swing/pre-emphasis level which will succeed. Both issues can lead to a
blank screen.

v2:
- improve commit message

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880
Tested-by: Jeremy Moles 
Signed-off-by: Imre Deak 
Reviewed-by: Paulo Zanoni 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Invalidate TLBs for the rings after a reset

2013-08-29T16:50:12+00:00

commit 884020bf3d2a3787a1cc6df902e98e0eec60330b upstream.

After any "soft gfx reset" we must manually invalidate the TLBs
associated with each ring. Empirically, it seems that a
suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is
that the hardware would fail to note the new address for its status
page, and so it would continue to write the shadow registers and
breadcrumbs into the old physical address (now used by something
completely different, scary). Whereas the driver would read the new
status page and never see any progress, it would appear that the GPU
hung immediately upon resume.

Based on a patch by naresh kumar kachhi 

Reported-by: Thiago Macieira 
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725
Signed-off-by: Chris Wilson 
Tested-by: Thiago Macieira 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915/lvds: ditch ->prepare special case

2013-08-20T15:26:27+00:00

commit 520c41cf2fa029d1e8b923ac2026f96664f17c4b upstream.

LVDS is the first output where dpms on/off and prepare/commit don't
perfectly match. Now the idea behind this special case seems to be
that for simple resolution changes on the LVDS we don't need to stop
the pipe, because (at least on newer chips) we can adjust the panel
fitter on the fly.

There are a few problems with the current code though:
- We still stop and restart the pipe unconditionally, because the crtc
  helper code isn't flexible enough.
- We show some ugly flickering, especially when changing crtcs (this
  the crtc helper would actually take into account, but we don't
  implement the encoder->get_crtc callback required to make this work
  properly).

So it doesn't even work as advertised. I agree that it would be nice
to do resolution changes on LVDS (and also eDP) whithout blacking the
screen where the panel fitter allows to do that. But imo we should
implement this as a special case a few layers up in the mode set code,
akin to how we already detect simple framebuffer changes (and only
update the required registers with ->mode_set_base).

Until this is all in place, make our lives easier and just rip it out.

Also note that this seems to fix actual bugs with enabling the lvds
output, see:

http://lists.freedesktop.org/archives/intel-gfx/2012-July/018614.html

Acked-by: Chris Wilson 
Cc: Takashi Iwai 
Cc: Giacomo Comes 
Tested-by: Takashi Iwai 
Signed-Off-by: Daniel Vetter 
Cc: Haitao Zhang 
Signed-off-by: Greg Kroah-Hartman

drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight

2013-08-11T22:38:43+00:00

commit e85843bec6c2ea7c10ec61238396891cc2b753a9 upstream.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026

Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.

[ kamal: backport to 3.4 ]

Tested-by: Eric Griffith 
Tested-by: Kent Baxley 
Signed-off-by: Kamal Mostafa 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: prefer VBT modes for SVDO-LVDS over EDID

2013-06-20T18:58:45+00:00

commit c3456fb3e4712d0448592af3c5d644c9472cd3c1 upstream.

In

commit 53d3b4d7778daf15900867336c85d3f8dd70600c
Author: Egbert Eich 
Date:   Tue Jun 4 17:13:21 2013 +0200

    drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC

Egbert Eich fixed a long-standing bug where we simply used a
non-working i2c controller to read the EDID for SDVO-LVDS panels.
Unfortunately some machines seem to not be able to cope with the mode
provided in the EDID. Specifically they seem to not be able to cope
with a 4x pixel mutliplier instead of a 2x one, which seems to have
been worked around by slightly changing the panels native mode in the
VBT so that the dotclock is just barely above 50MHz.

Since it took forever to notice the breakage it's fairly safe to
assume that at least for SDVO-LVDS panels the VBT contains fairly sane
data. So just switch around the order and use VBT modes first.

v2: Also add EDID modes just in case, and spell Egbert correctly.

v3: Elaborate a bit more about what's going on on Chris' machine.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524
Reported-and-tested-by: Chris Wilson 
Cc: Egbert Eich 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: no lvds quirk for hp t5740

2013-06-13T16:45:02+00:00

commit 45a211d75137b1ac869a8a758a6667f15827a115 upstream.

Last year, a patch was made for the "HP t5740e Thin Client" (see
http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html).
This device reports an lvds panel, but does not really have one.

The predecessor of this device is the "hp t5740", which also does not have
an lvds panel. This patch will add the same quirk for this device.

Signed-off-by: Ben Mesman 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.

2013-06-13T16:45:02+00:00

commit 53d3b4d7778daf15900867336c85d3f8dd70600c upstream.

In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used
for DDC. Thus the code will always have to rely on a LVDS panel
mode supplied by VBT.
In most cases this succeeds, so this didn't get detected for quite
a while.

This regression seems to have been introduced in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson 
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

Signed-off-by: Egbert Eich 
Reviewed-by: Chris Wilson 
[danvet: Add note about which commit likely introduced this issue.]
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fall back to bit banging mode for DVO transmitter detection

2013-05-11T20:48:10+00:00

commit e4bfff54ed3f5de88f5358504c78c2cb037813aa upstream.

As discussed in this thread
http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html
GMBUS based DVO transmitter detection seems to be unreliable which could
result in an unusable DVO port.

The attached patch fixes this by falling back to bit banging mode for
the time DVO transmitter detection is in progress.

Signed-off-by: David Müller 
Tested-by: David Müller 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900

2013-05-11T20:48:10+00:00

commit 9e9dd0e889c76c786e8f2e164c825c3c06dea30c upstream.

The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900
mini desktop PCs are probably misleading the LVDS detection
code in intel_lvds_supported. Nothing is connected to the
LVDS ports in these systems.

Signed-off-by: Christian Lamparter 
Signed-off-by: Daniel Vetter 
Signed-off-by: Greg Kroah-Hartman