linux-toradex.git/drivers/gpu/drm/msm/msm_drv.c, branch v5.3-rc8

drm: msm: Fix add_gpu_components

2019-08-01T16:52:21+00:00

add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes.  This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched.  This prevents display from initing if a GPU node is
defined, but it's status is disabled.

Fix this by checking the node's status before adding it to the match list.

Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark 
Signed-off-by: Jeffrey Hugo 
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com

drm/msm: correct NULL pointer dereference in context_init

2019-07-22T17:40:14+00:00

Correct attempted NULL pointer dereference in context_init() when
running without an IOMMU.

Reviewed-by: Rob Clark 
Signed-off-by: Brian Masney 
Fixes: 295b22ae596c ("drm/msm: Pass the MMU domain index in struct msm_file_private")
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190627020515.5660-1-masneyb@onstation.org

Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm

2019-07-16T02:04:27+00:00

Pull drm updates from Dave Airlie:
 "The biggest thing in this is the AMD Navi GPU support, this again
  contains a bunch of header files that are large. These are the new AMD
  RX5700 GPUs that just recently became available.

  New drivers:
   - ST-Ericsson MCDE driver
   - Ingenic JZ47xx SoC

  UAPI change:
   - HDR source metadata property

  Core:
   - HDR inforframes and EDID parsing
   - drm hdmi infoframe unpacking
   - remove prime sg_table caching into dma-buf
   - New gem vram helpers to reduce driver code
   - Lots of drmP.h removal
   - reservation fencing fix
   - documentation updates
   - drm_fb_helper_connector removed
   - mode name command handler rewrite

  fbcon:
   - Remove the fbcon notifiers

  ttm:
   - forward progress fixes

  dma-buf:
   - make mmap call optional
   - debugfs refcount fixes
   - dma-fence free with pending signals fix
   - each dma-buf gets an inode

  Panels:
   - Lots of additional panel bindings

  amdgpu:
   - initial navi10 support
   - avoid hw reset
   - HDR metadata support
   - new thermal sensors for vega asics
   - RAS fixes
   - use HMM rather than MMU notifier
   - xgmi topology via kfd
   - SR-IOV fixes
   - driver reload fixes
   - DC use a core bpc attribute
   - Aux fixes for DC
   - Bandwidth calc updates for DC
   - Clock handling refactor
   - kfd VEGAM support

  vmwgfx:
   - Coherent memory support changes

  i915:
   - HDR Support
   - HDMI i2c link
   - Icelake multi-segmented gamma support
   - GuC firmware update
   - Mule Creek Canyon PCH support for EHL
   - EHL platform updtes
   - move i915.alpha_support to i915.force_probe
   - runtime PM refactoring
   - VBT parsing refactoring
   - DSI fixes
   - struct mutex dependency reduction
   - GEM code reorg

  mali-dp:
   - Komeda driver features

  msm:
   - dsi vs EPROBE_DEFER fixes
   - msm8998 snapdragon 835 support
   - a540 gpu support
   - mdp5 and dpu interconnect support

  exynos:
   - drmP.h removal

  tegra:
   - misc fixes

  tda998x:
   - audio support improvements
   - pixel repeated mode support
   - quantisation range handling corrections
   - HDMI vendor info fix

  armada:
   - interlace support fix
   - overlay/video plane register handling refactor
   - add gamma support

  rockchip:
   - RX3328 support

  panfrost:
   - expose perf counters via hidden ioctls

  vkms:
   - enumerate CRC sources list

  ast:
   - rework BO handling

  mgag200:
   - rework BO handling

  dw-hdmi:
   - suspend/resume support

  rcar-du:
   - R8A774A1 Soc Support
   - LVDS dual-link mode support
   - Additional formats
   - Misc fixes

  omapdrm:
   - DSI command mode display support

  stm
   - fb modifier support
   - runtime PM support

  sun4i:
   - use vmap ops

  vc4:
   - binner bo binding rework

  v3d:
   - compute shader support
   - resync/sync fixes
   - job management refactoring

  lima:
   - NULL pointer in irq handler fix
   - scheduler default timeout

  virtio:
   - fence seqno support
   - trace events

  bochs:
   - misc fixes

  tc458767:
   - IRQ/HDP handling

  sii902x:
   - HDMI audio support

  atmel-hlcdc:
   - misc fixes

  meson:
   - zpos support"

* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
  Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
  Revert "mm: adjust apply_to_pfn_range interface for dropped token."
  mm: adjust apply_to_pfn_range interface for dropped token.
  drm/amdgpu/navi10: add uclk activity sensor
  drm/amdgpu: properly guard the generic discovery code
  drm/amdgpu: add missing documentation on new module parameters
  drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
  drm/amd/display: avoid 64-bit division
  drm/amdgpu/psp11: simplify the ucode register logic
  drm/amdgpu: properly guard DC support in navi code
  drm/amd/powerplay: vega20: fix uninitialized variable use
  drm/amd/display: dcn20: include linux/delay.h
  amdgpu: make pmu support optional
  drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
  drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
  drm/amd/powerplay: Use memset to initialize metrics structs
  drm/amdgpu/mes10.1: Fix header guard
  drm/amd/powerplay: add temperature sensor support for navi10
  drm/amdgpu: fix scheduler timeout calc
  drm/amdgpu: Prepare for hmm_range_register API change (v2)
  ...

drm/msm: Re-order uninit function to work during probe defer

2019-06-20T21:00:50+00:00

If bind fails, we can call msm_drm_uninit before kms elements have been
created. In this case, drm_atomic_helper_shutdown will fail since there
are no drm objects. Only call drm unregistration and shutdown if drm is
registered.

Also while we're in here move the workqueue destruction to below
component_unbind since components could be actively using the wq during
uninit or in their unbind routine.

Reviewed-by: Rob Clark 
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190524202919.179289-1-sean@poorly.run

drm/msm: Depopulate platform on probe failure

2019-06-20T18:42:05+00:00

add_display_components() calls of_platform_populate, and we depopluate
on pdev remove, but not when probe fails. So if we get a probe deferral
in one of the components, we won't depopulate the platform. This causes
the core to keep references to devices which should be destroyed, which
causes issues when those same devices try to re-initialize on the next
probe attempt.

I think this is the reason we had issues with the gmu's device-managed
resources on deferral (worked around in commit 94e3a17f33a5).

Reviewed-by: Rob Clark 
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.run

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Alexios Zavras 
Reviewed-by: Allison Randal 
Reviewed-by: Enrico Weigelt 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman

drm/msm: Pass the MMU domain index in struct msm_file_private

2019-06-18T20:46:43+00:00

Pass the index of the MMU domain in struct msm_file_private instead
of assuming gpu->id throughout the submit path. This clears the way
to change ctx->aspace to a per-instance pagetable.

Signed-off-by: Jordan Crouse 
Signed-off-by: Rob Clark

Merge tag 'drm-msm-next-2019-04-21' of https://gitlab.freedesktop.org/drm/msm into drm-next

2019-04-24T01:56:32+00:00

This time around it is a bunch of cleanup and fixes, expanding gpu
"zap" shader support (so we can take the GPU out of secure mode on
boot) to a6xx, and small UABI extension to support robustness (see
mesa MR 673).

Signed-off-by: Dave Airlie 
From: Rob Clark 
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsHwsEfi4y2LYKSqeqDEYvffwVgKhiP8jHcHpxp13J5LQ@mail.gmail.com

drm/msm: Implement .gem_free_object_unlocked

2019-04-19T18:50:06+00:00

We use a llist and a worker to delay the object cleanup. This avoids
taking mmap_sem and struct_mutex in the wrong order when calling
drm_gem_object_put_unlocked() from drm_gem_mmap().

Fixes lockdep problem with copy_from_user() in msm_ioctl_gem_submit().

Signed-off-by: Kristian H. Kristensen 
Signed-off-by: Rob Clark

drm/msm/gpu: Add submit queue queries

2019-04-19T18:50:06+00:00

Add the capability to query information from a submit queue.
The first available parameter is for querying the number of GPU faults
(hangs) that can be attributed to the queue.

This is useful for implementing context robustness. A user context can
regularly query the number of faults to see if it is responsible for any
and if so it can invalidate itself.

This is also helpful for testing by confirming to the user  driver if a
particular command stream caused a fault (or not as the case may be).

Signed-off-by: Jordan Crouse 
Signed-off-by: Rob Clark