linux-toradex.git/drivers/gpu/drm/renesas, branch master Linux kernel for Apalis and Colibri modules drm: renesas: rz-du: mipi_dsi: Set DSI divider 2026-03-02T10:28:38+00:00 Chris Brandt chris.brandt@renesas.com 2026-02-27T01:52:16+00:00 fb797a70108f3fda83fde6dea30bee4be7d5df8b Before the MIPI DSI clock source can be configured, the target divide ratio needs to be set. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Fixes: 5a4326f2e3b1 ("clk: renesas: rzg2l: Remove DSI clock rate restrictions") Link: https://patch.msgid.link/20260227015216.2721504-1-chris.brandt@renesas.com Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> 
Before the MIPI DSI clock source can be configured, the target divide
ratio needs to be set.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 5a4326f2e3b1 ("clk: renesas: rzg2l: Remove DSI clock rate restrictions")
Link: https://patch.msgid.link/20260227015216.2721504-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
drm: rcar-du: lvds: convert to of_drm_find_and_get_bridge() 2026-01-21T12:59:56+00:00 Luca Ceresoli luca.ceresoli@bootlin.com 2026-01-09T10:02:55+00:00 95d628c9e4738c070ba780488efbab894e583646 of_drm_find_bridge() is deprecated. Move to its replacement of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it is put when done. Since the companion bridge pointer is used by .atomic_enable, putting its reference in the remove function would be dangerous. Use .destroy to put it on final deallocation. Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-3-v2-6-8d7a3dbacdf4@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> 
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.

Since the companion bridge pointer is used by .atomic_enable, putting its
reference in the remove function would be dangerous. Use .destroy to put it
on final deallocation.

Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-3-v2-6-8d7a3dbacdf4@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels 2026-01-16T07:49:51+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2026-01-12T15:43:18+00:00 64aa8b3a60a825134f7d866adf05c024bbe0c24c Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> 
Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:

  systemd-shutdown[1]: Rebooting.
  Call trace:
   ...
   do_serror+0x28/0x68
   el1h_64_error_handler+0x34/0x50
   el1h_64_error+0x6c/0x70
   rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
   mipi_dsi_device_transfer+0x44/0x58
   mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
   ili9881c_unprepare+0x38/0x88
   drm_panel_unprepare+0xbc/0x108

This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.

Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().

With this change we now have the correct power-down/stop sequence:

  systemd-shutdown[1]: Rebooting.
  rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
  ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
  rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
  reboot: Restarting system

Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC 2025-12-16T07:25:29+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2025-10-15T19:26:11+00:00 20de1b0080b9889094d703927871da8f21fb624e Add MIPI DSI support for the Renesas RZ/V2H(P) SoC. Compared to the RZ/G2L family, the RZ/V2H(P) requires dedicated D-PHY PLL programming, different clock configuration, and additional timing parameter handling. The driver introduces lookup tables and helpers for D-PHY timings (TCLK*, THS*, TLPX, and ULPS exit) as specified in the RZ/V2H(P) hardware manual. ULPS exit timing depends on the LPCLK rate and is now handled explicitly. The implementation also adds support for 16 bpp RGB format, updates the clock setup path to use the RZ/V2H PLL divider limits, and provides new .dphy_init, .dphy_conf_clks, and .dphy_startup_late_init callbacks to match the RZ/V2H sequence. With these changes, the RZ/V2H(P) can operate the MIPI DSI interface in compliance with its hardware specification while retaining support for existing RZ/G2L platforms. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20251015192611.241920-8-prabhakar.mahadev-lad.rj@bp.renesas.com 
Add MIPI DSI support for the Renesas RZ/V2H(P) SoC. Compared to the
RZ/G2L family, the RZ/V2H(P) requires dedicated D-PHY PLL programming,
different clock configuration, and additional timing parameter handling.
The driver introduces lookup tables and helpers for D-PHY timings
(TCLK*, THS*, TLPX, and ULPS exit) as specified in the RZ/V2H(P) hardware
manual. ULPS exit timing depends on the LPCLK rate and is now handled
explicitly.

The implementation also adds support for 16 bpp RGB format, updates the
clock setup path to use the RZ/V2H PLL divider limits, and provides new
.dphy_init, .dphy_conf_clks, and .dphy_startup_late_init callbacks to
match the RZ/V2H sequence.

With these changes, the RZ/V2H(P) can operate the MIPI DSI interface in
compliance with its hardware specification while retaining support for
existing RZ/G2L platforms.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-8-prabhakar.mahadev-lad.rj@bp.renesas.com
drm: renesas: rz-du: mipi_dsi: Add LPCLK clock support 2025-12-16T07:25:04+00:00 Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com 2025-10-15T19:26:10+00:00 99b98993ae010b86d0ec0d779c1c8be890057568 Add LPCLK clock handling to the RZ/G2L MIPI DSI driver to support proper DSI timing parameter configuration on RZ/V2H SoCs. While lpclk is present on both RZ/G2L and RZ/V2H SoCs, the RZ/V2H SoC specifically uses the lpclk rate to configure the DSI timing parameter ULPSEXIT. Introduce a new lpclk field in the rzg2l_mipi_dsi structure and acquire the "lpclk" clock during probe to enable lpclk rate-based timing calculations on RZ/V2H while maintaining compatibility with RZ/G2L. Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20251015192611.241920-7-prabhakar.mahadev-lad.rj@bp.renesas.com 
Add LPCLK clock handling to the RZ/G2L MIPI DSI driver to support proper
DSI timing parameter configuration on RZ/V2H SoCs. While lpclk is present
on both RZ/G2L and RZ/V2H SoCs, the RZ/V2H SoC specifically uses the lpclk
rate to configure the DSI timing parameter ULPSEXIT.

Introduce a new lpclk field in the rzg2l_mipi_dsi structure and acquire
the "lpclk" clock during probe to enable lpclk rate-based timing
calculations on RZ/V2H while maintaining compatibility with RZ/G2L.

Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-7-prabhakar.mahadev-lad.rj@bp.renesas.com
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC 2025-12-04T12:59:21+00:00 Marek Vasut marek.vasut+renesas@mailbox.org 2025-12-02T18:11:06+00:00 308eeb8ca3fdee54bcd3ec7272c05688e178299a Since commit 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") the driver does not set TXVMVPRMSET0R_VSPOL_LOW and TXVMVPRMSET0R_HSPOL_LOW for modes which set neither DRM_MODE_FLAG_[PN].SYNC. The previous behavior was to assume that neither flag means DRM_MODE_FLAG_N.SYNC . Restore the previous behavior for maximum compatibility. The change of behavior is visible below, consider Vertical mode->flags for simplicity sake, although the same applies to Horizontal ones: Before 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") : - DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0 - DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW - Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW After 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") : - DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0 - DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW - Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= 0 <---------- This broke The "Neither" case behavior is different, because DRM_MODE_FLAG_N[HV]SYNC is really not equivalent !DRM_MODE_FLAG_P[HV]SYNC . Fixes: 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patch.msgid.link/20251202181146.138365-1-marek.vasut+renesas@mailbox.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> 
Since commit 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
the driver does not set TXVMVPRMSET0R_VSPOL_LOW and TXVMVPRMSET0R_HSPOL_LOW
for modes which set neither DRM_MODE_FLAG_[PN].SYNC. The previous behavior
was to assume that neither flag means DRM_MODE_FLAG_N.SYNC . Restore the
previous behavior for maximum compatibility.

The change of behavior is visible below, consider Vertical mode->flags
for simplicity sake, although the same applies to Horizontal ones:

Before 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :

- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW

After 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :

- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= 0 <---------- This broke

The "Neither" case behavior is different, because DRM_MODE_FLAG_N[HV]SYNC is
really not equivalent !DRM_MODE_FLAG_P[HV]SYNC .

Fixes: 94fe479fae96 ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251202181146.138365-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
drm: rcar-du: fix incorrect return in rcar_du_crtc_cleanup() 2025-11-05T09:17:26+00:00 Alok Tiwari alok.a.tiwari@oracle.com 2025-10-17T19:16:21+00:00 c84d874615d9da910186f4e5f00174b8036007ce The rcar_du_crtc_cleanup() function has a void return type, but incorrectly uses a return statement with a call to drm_crtc_cleanup(), which also returns void. Remove the return statement to ensure proper function semantics. No functional change intended. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://patch.msgid.link/20251017191634.1454201-1-alok.a.tiwari@oracle.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> 
The rcar_du_crtc_cleanup() function has a void return type, but
incorrectly uses a return statement with a call to drm_crtc_cleanup(),
which also returns void.

Remove the return statement to ensure proper function semantics.
No functional change intended.

Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251017191634.1454201-1-alok.a.tiwari@oracle.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
drm/renesas: include drm_print.h where needed 2025-11-03T13:48:02+00:00 Jani Nikula jani.nikula@intel.com 2025-11-03T09:22:38+00:00 bdfdec3853249ebaa318f59d4f73d359a82a785c rzg2l_du_drv.c depends on drm_print.h being indirectly included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. Include drm_print.h explicitly. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20251103112418.031b3f8c@canb.auug.org.au Fixes: f6e8dc9edf96 ("drm: include drm_print.h where needed") Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/04f617d5fe37f92d750efbb73065df3997f5c6b5.1762161597.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> 
rzg2l_du_drv.c depends on drm_print.h being indirectly included via
drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. Include drm_print.h
explicitly.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20251103112418.031b3f8c@canb.auug.org.au
Fixes: f6e8dc9edf96 ("drm: include drm_print.h where needed")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/04f617d5fe37f92d750efbb73065df3997f5c6b5.1762161597.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>