linux-toradex.git/drivers/gpu/drm/solomon, branch v6.0-rc4

Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm

2022-08-04T02:52:08+00:00

Pull drm updates from Dave Airlie:
 "Highlights:

   - New driver for logicvc - which is a display IP core.

   - EDID parser rework to add new extensions

   - fbcon scrolling improvements

   - i915 has some more DG2 work but not enabled by default, but should
     have enough features for userspace to work now.

  Otherwise it's lots of work all over the place. Detailed summary:

  New driver:
   - logicvc

  vfio:
   - use aperture API

  core:
   - of: Add data-lane helpers and convert drivers
   - connector: Remove deprecated ida_simple_get()

  media:
   - Add various RGB666 and RGB888 format constants

  panel:
   - Add HannStar HSD101PWW
   - Add ETML0700Y5DHA

  dma-buf:
   - add sync-file API
   - set dma mask for udmabuf devices

  fbcon:
   - Improve scrolling performance
   - Sanitize input

  fbdev:
   - device unregistering fixes
   - vesa: Support COMPILE_TEST
   - Disable firmware-device registration when first native driver loads

  aperture:
   - fix segfault during hot-unplug
   - export for use with other subsystems

  client:
   - use driver validated modes

  dp:
   - aux: make probing more reliable
   - mst: Read extended DPCD capabilities during system resume
   - Support waiting for HDP signal
   - Port-validation fixes

  edid:
   - CEA data-block iterators
   - struct drm_edid introduction
   - implement HF-EEODB extension

  gem:
   - don't use fb format non-existing planes

  probe-helper:
   - use 640x480 as displayport fallback

  scheduler:
   - don't kill jobs in interrupt context

  bridge:
   - Add support for i.MX8qxp and i.MX8qm
   - lots of fixes/cleanups
   - Add TI-DLPC3433
   - fy07024di26a30d: Optional GPIO reset
   - ldb: Add reg and reg-name properties to bindings, Kconfig fixes
   - lt9611: Fix display sensing;
   - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
   - tc358775: Fix clock settings
   - ti-sn65dsi83: Allow GPIO to sleep
   - adv7511: I2C fixes
   - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
   - fsl-ldb: Drop DE flip
   - ti-sn65dsi86: Convert to atomic modesetting

  amdgpu:
   - use atomic fence helpers in DM
   - fix VRAM address calculations
   - export CRTC bpc via debugfs
   - Initial devcoredump support
   - Enable high priority gfx queue on asics which support it
   - Adjust GART size on newer APUs for S/G display
   - Soft reset for GFX 11 / SDMA 6
   - Add gfxoff status query for vangogh
   - Fix timestamps for cursor only commits
   - Adjust GART size on newer APUs for S/G display
   - fix buddy memory corruption

  amdkfd:
   - MMU notifier fixes
   - P2P DMA support using dma-buf
   - Add available memory IOCTL
   - HMM profiler support
   - Simplify GPUVM validation
   - Unified memory for CWSR save/restore area

  i915:
   - General driver clean-up
   - DG2 enabling (still under force probe)
       - DG2 small BAR memory support
       - HuC loading support
       - DG2 workarounds
       - DG2/ATS-M device IDs added
   - Ponte Vecchio prep work and new blitter engines
   - add Meteorlake support
   - Fix sparse warnings
   - DMC MMIO range checks
   - Audio related fixes
   - Runtime PM fixes
   - PSR fixes
   - Media freq factor and per-gt enhancements
   - DSI fixes for ICL+
   - Disable DMC flip queue handlers
   - ADL_P voltage swing updates
   - Use more the VBT for panel information
   - Fix on Type-C ports with TBT mode
   - Improve fastset and allow seamless M/N changes
   - Accept more fixed modes with VRR/DMRRS panels
   - Disable connector polling for a headless SKU
   - ADL-S display PLL w/a
   - Enable THP on Icelake and beyond
   - Fix i915_gem_object_ggtt_pin_ww regression on old platforms
   - Expose per tile media freq factor in sysfs
   - Fix dma_resv fence handling in multi-batch execbuf
   - Improve on suspend / resume time with VT-d enabled
   - export CRTC bpc settings via debugfs

  msm:
   - gpu: a619 support
   - gpu: Fix for unclocked GMU register access
   - gpu: Devcore dump enhancements
   - client utilization via fdinfo support
   - fix fence rollover issue
   - gem: Lockdep false-positive warning fix
   - gem: Switch to pfn mappings
   - WB support on sc7180
   - dp: dropped custom bulk clock implementation
   - fix link retraining on resolution change
   - hdmi: dropped obsolete GPIO support

  tegra:
   - context isolation for host1x engines
   - tegra234 soc support

  mediatek:
   - add vdosys0/1 for mt8195
   - add MT8195 dp_intf driver

  exynos:
   - Fix resume function issue of exynos decon driver by calling
     clk_disable_unprepare() properly if clk_prepare_enable() failed.

  nouveau:
   - set of misc fixes/cleanups
   - display cleanups

  gma500:
   - Cleanup connector I2C handling

  hyperv:
   - Unify VRAM allocation of Gen1 and Gen2

  meson:
   - Support YUV422 output; Refcount fixes

  mgag200:
   - Support damage clipping
   - Support gamma handling
   - Protect concurrent HW access
   - Fixes to connector
   - Store model-specific limits in device-info structure
   - fix PCI register init

  panfrost:
   - Valhall support

  r128:
   - Fix bit-shift overflow

  rockchip:
   - Locking fixes in error path

  ssd130x:
   - Fix built-in linkage

  udl:
   - Always advertize VGA connector

  ast:
   - Support multiple outputs
   - fix black screen on resume

  sun4i:
   - HDMI PHY cleanups

  vc4:
   - Add support for BCM2711

  vkms:
   - Allocate output buffer with vmalloc()

  mcde:
   - Fix ref-count leak

  mxsfb/lcdif:
   - Support i.MX8MP LCD controller

  stm/ltdc:
   - Support dynamic Z order
   - Support mirroring

  ingenic:
   - Fix display at maximum resolution"

* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
  drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
  drm/amdgpu: enable support for psp 13.0.4 block
  drm/amdgpu: add files for PSP 13.0.4
  drm/amdgpu: add header files for MP 13.0.4
  drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
  drm/amdgpu: send msg to IMU for the front-door loading
  drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
  drm/amdgpu: fix hive reference leak when reflecting psp topology info
  drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
  drm/amd/pm: update driver if header for SMU 13.0.0
  drm/amdgpu: move mes self test after drm sched re-started
  drm/amdgpu: drop non-necessary call trace dump
  drm/amdgpu: enable VCN cg and JPEG cg/pg
  drm/amdgpu: vcn_4_0_2 video codec query
  drm/amdgpu: add VCN_4_0_2 firmware support
  drm/amdgpu: add VCN function in NBIO v7.7
  drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
  drm/amd/amdgpu: add memory training support for PSP_V13
  drm/amdkfd: remove an unnecessary amdgpu_bo_ref
  drm/amd/pm: Add get_gfx_off_status interface for yellow carp
  ...

drm/ssd130x: Fix pre-charge period setting

2022-07-07T08:52:03+00:00

Fix small typo which causes the mask for the 'precharge1' setting
to be used with the 'precharge2' value.

Signed-off-by: Ezequiel Garcia 
Acked-by: Javier Martinez Canillas 
Signed-off-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20220706184133.210888-1-ezequiel@vanguardiasur.com.ar

drm: Drop drm_framebuffer.h from drm_crtc.h

2022-06-20T20:53:55+00:00

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula

drm: Drop drm_edid.h from drm_crtc.h

2022-06-20T20:53:55+00:00

drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.

Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)

Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula

drm/ssd130x: Only define a SPI device ID table when built as a module

2022-06-01T22:35:32+00:00

The kernel test robot reports a compile warning due the ssd130x_spi_table
variable being defined but not used. This happen when ssd130x-spi driver
is built-in instead of being built as a module, i.e:

  CC      drivers/gpu/drm/solomon/ssd130x-spi.o
  AR      drivers/base/firmware_loader/built-in.a
  AR      drivers/base/built-in.a
  CC      kernel/trace/trace.o
drivers/gpu/drm/solomon/ssd130x-spi.c:155:35: warning: ‘ssd130x_spi_table’ defined but not used [-Wunused-const-variable=]
  155 | static const struct spi_device_id ssd130x_spi_table[] = {
      |                                   ^~~~~~~~~~~~~~~~~

The driver shouldn't need a SPI device ID table and only have an OF device
ID table, but the former is needed to workaround an issue in the SPI core.
This always reports a MODALIAS of the form "spi:" even for devices
registered through Device Trees.

But the table is only needed when the driver built as a module to populate
the .ko alias info. It's not needed when the driver is built-in the kernel.

Fixes: 74373977d2ca ("drm/solomon: Add SSD130x OLED displays SPI support")
Reported-by: kernel test robot 
Signed-off-by: Javier Martinez Canillas 
Reviewed-by: Nathan Chancellor 
Link: https://patchwork.freedesktop.org/patch/msgid/20220530140246.742469-1-javierm@redhat.com

drm/ssd130x: Make ssd130x_remove() return void

2022-04-26T07:43:37+00:00

This function returns zero unconditionally, so there isn't any benefit
of returning a value. Make it return void to be able to see at a glance
that the return value of ssd130x_i2c_remove() is always zero.

This patch is a preparation for making i2c remove callbacks return void.

Signed-off-by: Uwe Kleine-König 
Acked-by: Javier Martinez Canillas 
Signed-off-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20220425192306.59800-1-u.kleine-koenig@pengutronix.de

drm/solomon: Add SSD130x OLED displays SPI support

2022-04-20T16:48:17+00:00

The ssd130x driver only provides the core support for these devices but it
does not have any bus transport logic. Add a driver to interface over SPI.

There is a difference in the communication protocol when using 4-wire SPI
instead of I2C. For the latter, a control byte that contains a D/C# field
has to be sent. This field tells the controller whether the data has to be
written to the command register or to the graphics display data memory.

But for 4-wire SPI that control byte is not used, instead a real D/C# line
must be pulled HIGH for commands data and LOW for graphics display data.

For this reason the standard SPI regmap can't be used and a custom .write
bus handler is needed.

Signed-off-by: Javier Martinez Canillas 
Acked-by: Mark Brown 
Reviewed-by: Geert Uytterhoeven 
Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-6-javierm@redhat.com

drm/solomon: Move device info from ssd130x-i2c to the core driver

2022-04-20T16:48:17+00:00

These are declared in the ssd130x-i2c transport driver but the information
is not I2C specific, and could be used by other SSD130x transport drivers.

Move them to the ssd130x core driver and just set the OF device entries to
an ID that could be used to lookup the correct device info from an array.

While being there, also move the SSD130X_DATA and SSD130X_COMMAND control
bytes. Since even though they are used by the I2C interface, they could
also be useful for other transport protocols such as SPI.

Suggested-by: Chen-Yu Tsai 
Signed-off-by: Javier Martinez Canillas 
Acked-by: Mark Brown 
Reviewed-by: Geert Uytterhoeven 
Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-5-javierm@redhat.com

drm/solomon: Add ssd130x new compatible strings and deprecate old ones.

2022-04-20T16:48:17+00:00

The current compatible strings for SSD130x I2C controllers contain an "fb"
and "-i2c" suffixes. These have been deprecated and more correct ones were
added, that don't encode a subsystem or bus used to interface the devices.

Signed-off-by: Javier Martinez Canillas 
Acked-by: Mark Brown 
Reviewed-by: Geert Uytterhoeven 
Link: https://patchwork.freedesktop.org/patch/msgid/20220419214824.335075-4-javierm@redhat.com

drm/ssd130x: Add support for SINO WEALTH SH1106

2022-04-07T13:26:04+00:00

The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.

Add support for this display driver. The default values for some of
the hardware settings are taken from the datasheet.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Javier Martinez Canillas 
Signed-off-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-5-wens@kernel.org