linux-toradex.git/drivers/gpu/drm/sun4i/sun8i_vi_layer.c, branch v6.16

drm/sun4i: Fix layer zpos change/atomic modesetting

2024-06-10T10:44:41+00:00

Identical configurations of planes can lead to different (and wrong)
layer -> pipe routing at HW level, depending on the order of atomic
plane changes.

For example:

- Layer 1 is configured to zpos 0 and thus uses pipe 0. No other layer
  is enabled. This is a typical situation at boot.

- When a compositor takes over and layer 3 is enabled,
  sun8i_ui_layer_enable() will get called with old_zpos=0 zpos=1, which
  will lead to incorrect disabling of pipe 0 and enabling of pipe 1.

What happens is that sun8i_ui_layer_enable() function may disable
blender pipes even if it is no longer assigned to its layer.

To correct this, move the routing setup out of individual plane's
atomic_update into crtc's atomic_update, where it can be calculated
and updated all at once.

Remove the atomic_disable callback because it is no longer needed.

Signed-off-by: Ondrej Jirman 
Reviewed-by: Jernej Skrabec 
Link: https://lore.kernel.org/r/20240224150604.3855534-4-megi@xff.cz
Signed-off-by: Maxime Ripard

drm/sun4i: Unify sun8i_*_layer structs

2024-06-10T10:44:40+00:00

These structs are identical, use a single struct to represent private
data for the DRM plane. This is a preparation for configuring layer
routing from the CRTC (mixer) instead of current approach of setting
up routing from individual layer's atomic_update callback.

Signed-off-by: Ondrej Jirman 
Reviewed-by: Maxime Ripard 
Reviewed-by: Jernej Skrabec 
Link: https://lore.kernel.org/r/20240224150604.3855534-2-megi@xff.cz
Signed-off-by: Maxime Ripard

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

2022-08-03T16:32:27+00:00

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.

Hence, rename the field to dma_addr, which is more applicable.

In order to do this renaming the following coccinelle script was used:

```
	@@
	struct drm_gem_dma_object *gem;
	@@

	- gem->paddr
	+ gem->dma_addr

	@@
	struct drm_gem_dma_object gem;
	@@

	- gem.paddr
	+ gem.dma_addr

	@exists@
	typedef dma_addr_t;
	symbol paddr;
	@@

	dma_addr_t paddr;
	<...
	- paddr
	+ dma_addr
	...>

	@@
	symbol paddr;
	@@
	dma_addr_t
	- paddr
	+ dma_addr
	;

```

This patch is compile-time tested with:

```
	make ARCH={x86_64,arm,arm64} allyesconfig
	make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```

Acked-by: Sam Ravnborg 
Suggested-by: Laurent Pinchart 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Danilo Krummrich 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com

drm/gem: rename GEM CMA helpers to GEM DMA helpers

2022-08-03T16:31:49+00:00

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg 
Acked-by: Thomas Zimmermann 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Danilo Krummrich 
Reviewed-by: Liviu Dudau  #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm/fb: rename FB CMA helpers to FB DMA helpers

2022-08-03T16:30:55+00:00

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg 
Acked-by: Thomas Zimmermann 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Danilo Krummrich 
Reviewed-by: Liviu Dudau  #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALING

2022-07-26T16:42:00+00:00

Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant
is not really a helper, but rather a characteristic of the plane itself.

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de

drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers

2022-07-26T16:41:56+00:00

The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of
DRM includes the latter header file for using this macro. Move the macro
and remove the include statements.

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de

drm: Drop drm_blend.h from drm_crtc.h

2022-06-20T20:53:55+00:00

drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.

Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.

Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula

drm: Drop drm_framebuffer.h from drm_crtc.h

2022-06-20T20:53:55+00:00

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula

drm/sun4i: Allow VI layers to be primary planes

2022-04-26T12:24:57+00:00

D1's mixer 1 has no UI layers, only a single VI layer. That means the
mixer can only be used if the primary plane comes from this VI layer.
Add the code to handle this case.

Signed-off-by: Samuel Holland 
Reviewed-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-10-samuel@sholland.org