linux-toradex.git/drivers/gpu/drm/vc4, branch v6.0-rc4

drm/vc4: hdmi: Rework power up

2022-08-18T15:15:18+00:00

The current code tries to handle the case where CONFIG_PM isn't selected
by first calling our runtime_resume implementation and then properly
report the power state to the runtime_pm core.

This allows to have a functionning device even if pm_runtime_get_*
functions are nops.

However, the device power state if CONFIG_PM is enabled is
RPM_SUSPENDED, and thus our vc4_hdmi_write() and vc4_hdmi_read() calls
in the runtime_pm hooks will now report a warning since the device might
not be properly powered.

Even more so, we need CONFIG_PM enabled since the previous RaspberryPi
have a power domain that needs to be powered up for the HDMI controller
to be usable.

The previous patch has created a dependency on CONFIG_PM, now we can
just assume it's there and only call pm_runtime_resume_and_get() to make
sure our device is powered in bind.

Link: https://lore.kernel.org/r/20220629123510.1915022-39-maxime@cerno.tech
Acked-by: Thomas Zimmermann 
Tested-by: Stefan Wahren 
Signed-off-by: Maxime Ripard 
(cherry picked from commit 53565c28e6af2cef6bbf438c34250135e3564459)
Signed-off-by: Maxime Ripard

drm/vc4: hdmi: Depends on CONFIG_PM

2022-08-18T15:14:58+00:00

We already depend on runtime PM to get the power domains and clocks for
most of the devices supported by the vc4 driver, so let's just select it
to make sure it's there.

Link: https://lore.kernel.org/r/20220629123510.1915022-38-maxime@cerno.tech
Acked-by: Thomas Zimmermann 
Tested-by: Stefan Wahren 
Signed-off-by: Maxime Ripard 
(cherry picked from commit f1bc386b319e93e56453ae27e9e83817bb1f6f95)
Signed-off-by: Maxime Ripard

Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2022-08-06T17:19:51+00:00

Pull sound updates from Takashi Iwai:
 "As the diffstat shows, we've had lots of developments in a wide range
  at this time; the majority of changes are about ASoC, including
  subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
  new drivers (as usual), while there have been some significant (but
  almost invisible) improvements in ALSA core side, too.

  Below are some highlights:

  Core:

   - Faster lookups of control elements with Xarray; normal user won't
     notice, but on the devices with tons of control elements, it can be
     visibly faster

   - Support for input validation for controls; this will harden for
     badly written drivers in general with a slight overhead

   - Deferred async signal handling for working around the potential
     deadlocks

   - Cleanup / refactoring raw MIDI locking code

  ASoC:

   - Restructing of the set_fmt() callbacks for making things clearer in
     situations like CODEC to CODEC links

   - Clean up and modernizing the DAI naming scheme setups

   - Merge of more of the Intel AVS driver stack, including some board
     integrations

   - New version 4 mechanism for communication with SOF DSPs

   - Suppoort for dynamically selecting the PLL to use at runtime on
     i.MX platforms

   - Improvements for CODEC to CODEC support in the generic cards

   - Support for AMD Jadeite and various machines, AMD RPL, Intel
     MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
     MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
     WAS883x, and Texas Instruments TAS2780

  HD- and USB-audio:

   - Continued improvement for CS35L41 (sub)codec support

   - More quirks for various devices (HP, Lenovo, Dell, Clevo)"

* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
  ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
  ALSA: line6: Replace sprintf() with sysfs_emit()
  ALSA: hda: Replace sprintf() with sysfs_emit()
  ALSA: pcm: Replace sprintf() with sysfs_emit()
  ALSA: core: Replace scnprintf() with sysfs_emit()
  ALSA: control-led: Replace sprintf() with sysfs_emit()
  ALSA: aoa: Replace sprintf() with sysfs_emit()
  ALSA: ac97: Replace sprintf() with sysfs_emit()
  ALSA: hda/realtek: Add quirk for Clevo NV45PZ
  ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
  ALSA: control: Use deferred fasync helper
  ALSA: pcm: Use deferred fasync helper
  ALSA: timer: Use deferred fasync helper
  ALSA: core: Add async signal helpers
  ASoC: q6asm: use kcalloc() instead of kzalloc()
  ACPI: scan: Add CLSA0101 Laptop Support
  ALSA: hda: cs35l41: Support CLSA0101
  ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
  ASoC: dt-bindings: use spi-peripheral-props.yaml
  ASoC: codecs: va-macro: use fsgen as clock
  ...

Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

2022-07-13T00:54:56+00:00

Backmerge in rc6 so I can merge msm next easier.

Linux 5.19-rc6

Signed-off-by: Dave Airlie

drm: Remove linux/media-bus-format.h from drm_crtc.h

2022-07-05T18:15:13+00:00

drm_crtc.h has no need for linux/media-bus-format.h, so don't
include it. Avoids useless rebuilds of the entire universe when
touching linux/media-bus-format.h.

Quite a few placs do currently depend on linux/media-bus-format.h
without actually including it directly. All of those need to be
fixed up.

v2: Deal with ingenic as well
v3: Fix up mxsfb and remaining parts of imx

Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula 
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com

drm: Remove linux/fb.h from drm_crtc.h

2022-07-05T18:14:02+00:00

drm_crtc.h has no need for linux/fb.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching linux/fb.h.

Quite a few placs do currently depend on linux/fb.h or other
headers pulled in by it without actually including any of it
directly. All of those need to be fixed up.

v2: Split the vmwgfx change out

Acked-by: Sam Ravnborg 
Acked-by: Jani Nikula 
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com

drm/vc4: change vc4_dma_range_matches from a global to static

2022-06-30T07:38:39+00:00

sparse reports
drivers/gpu/drm/vc4/vc4_drv.c:270:27: warning: symbol 'vc4_dma_range_matches' was not declared. Should it be static?

vc4_dma_range_matches is only used in vc4_drv.c, so it's storage class specifier
should be static.

Fixes: da8e393e23ef ("drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component")
Signed-off-by: Tom Rix 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20220629200101.498138-1-trix@redhat.com

drm/vc4: hdmi: Move pixel doubling from Pixelvalve to HDMI block

2022-06-28T12:56:24+00:00

With the change to 2 pixels/clock, the pixel doubling in the PV
results in doubling each pair of pixels, ie ABABCDCD instead of
AABBCCDD.

Move the pixel doubling to the HDMI block, however this means
that DBLCLK modes now fall foul of requiring even values for
all the horizontal timing parameters.
As both 480i and 576i fail this, attempt to fix up DBLCLK modes
that have odd timings values.

Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson 
Link: https://lore.kernel.org/r/20220613144800.326124-34-maxime@cerno.tech
Signed-off-by: Maxime Ripard

drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes

2022-06-28T12:56:20+00:00

For interlaced modes the timings were not being correctly
programmed into the HDMI block, so correct them.

Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson 
Link: https://lore.kernel.org/r/20220613144800.326124-33-maxime@cerno.tech
Signed-off-by: Maxime Ripard

drm/vc4: hdmi: Force modeset when bpc or format changes

2022-06-28T12:56:16+00:00

Whenever the maximum BPC is changed, vc4_hdmi_encoder_compute_config()
might pick up a different BPC or format depending on the display
capabilities.

That change will have a number of side effects, including the clock
rates and whether the scrambling is enabled.

However, only drm_crtc_state.connectors_changed will be set to true,
since that properly only affects the connector.

This means that while drm_atomic_crtc_needs_modeset() will return true,
and thus drm_atomic_helper_commit_modeset_enables() will call our
encoder atomic_enable() hook, mode_changed will be false.

So crtc_set_mode() will not call our encoder .atomic_mode_set() hook. We
use this hook in vc4 to set the vc4_hdmi_connector_state.output_bpc (and
output_format), and will then reuse the value in .atomic_enable() to select
whether or not scrambling should be enabled.

However, since our clock rate is pre-computed during .atomic_check(), we
end up with the clocks properly configured, but the scrambling disabled,
leading to a blank screen.

Let's set mode_changed to true in our HDMI driver to force the update of
output_bpc, and thus prevent the issue entirely.

Fixes: ba8c0faebbb0 ("drm/vc4: hdmi: Enable 10/12 bpc output")
Signed-off-by: Dom Cobley 
Link: https://lore.kernel.org/r/20220613144800.326124-32-maxime@cerno.tech
Signed-off-by: Maxime Ripard