linux-toradex.git/drivers/gpu/drm/virtio, branch v7.0-rc5 Linux kernel for Apalis and Colibri modules Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-22T04:03:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T04:03:00+00:00 32a92f8c89326985e05dce8b22d3f0aa07a3e1bd This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T01:06:51+00:00 323bbfcf1ef8836d0d2ad9e2c1f1c684f0e3b5b3 This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
drm: include drm_print.h where needed 2025-10-31T08:34:52+00:00 Jani Nikula jani.nikula@intel.com 2025-10-29T10:39:45+00:00 f6e8dc9edf963dbc99085e54f6ced6da9daa6100 There are a gazillion files that depend on drm_print.h being indirectly included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In preparation for removing those includes, explicitly include drm_print.h where needed. Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com 
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
drm/virtgpu: Use vblank timer 2025-10-09T03:07:21+00:00 Thomas Zimmermann tzimmermann@suse.de 2025-10-08T13:06:51+00:00 a036f5fceedb9fbd715565fef7b824a121503de7 Use a vblank timer to simulate the vblank interrupt. The DRM vblank helpers provide an implementation on top of Linux' hrtimer. Virtgpu enables and disables the timer as part of the CRTC. The atomic_flush callback sets up the event. Like vblank interrupts, the vblank timer fires at the rate of the display refresh. Most userspace limits its page flip rate according to the DRM vblank event. Virtgpu's virtual hardware does not provide vblank interrupts, so DRM sends each event ASAP. With the fast access times of virtual display memory, the event rate is much higher than the display mode's refresh rate; creating the next page flip almost immediately. This leads to excessive CPU overhead from even small display updates, such as moving the mouse pointer. This problem affects virtgpu and all other virtual displays. See [1] for a discussion in the context of hypervdrm. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1] Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20251008130701.246988-1-tzimmermann@suse.de 
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Virtgpu
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.

Most userspace limits its page flip rate according to the DRM vblank
event. Virtgpu's virtual hardware does not provide vblank interrupts, so
DRM sends each event ASAP. With the fast access times of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.

This problem affects virtgpu and all other virtual displays. See [1] for
a discussion in the context of hypervdrm.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20251008130701.246988-1-tzimmermann@suse.de
drm/virtio: Handle drm_crtc_init_with_planes() errors 2025-10-09T03:04:01+00:00 Alexandr Sapozhnikov alsp705@gmail.com 2025-09-22T14:44:13+00:00 dc84dbcc54d2f0f35942ca54aa7a04770aa97199 Return value of function drm_crtc_init_with_planes(), called by vgdev_output_init(), is not checked, but it is usually checked for this function. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> [dmitry.osipenko@collabora.com: coding style fix, edit commit message] Link: https://lore.kernel.org/r/20250922144418.41-1-alsp705@gmail.com 
Return value of function drm_crtc_init_with_planes(),
called by vgdev_output_init(), is not checked,
but it is usually checked for this function.

Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: coding style fix, edit commit message]
Link: https://lore.kernel.org/r/20250922144418.41-1-alsp705@gmail.com
drm/virtio: clean up minor codestyle issues 2025-08-20T10:36:45+00:00 Athul Raj Kollareth krathul3152@gmail.com 2025-08-13T06:21:05+00:00 38580d1e7f18230b10e8ba6d9a44a9fcc532f47f Fix codestyle warnings and errors generated by CHECKPATCH in virtio source files. Signed-off-by: Athul Raj Kollareth <krathul3152@gmail.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250813062109.5326-1-krathul3152@gmail.com 
Fix codestyle warnings and errors generated by CHECKPATCH in virtio
source files.

Signed-off-by: Athul Raj Kollareth <krathul3152@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250813062109.5326-1-krathul3152@gmail.com
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2025-08-01T21:17:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-08-01T21:17:48+00:00 821c9e515db512904250e1d460109a1dc4c7ef6b Pull virtio updates from Michael Tsirkin: - vhost can now support legacy threading if enabled in Kconfig - vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc - vhost now supports the in-order feature. guest bits missed the merge window. - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits) vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers vsock/virtio: Rename virtio_vsock_skb_rx_put() vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers vsock/virtio: Move SKB allocation lower-bound check to callers vsock/virtio: Rename virtio_vsock_alloc_skb() vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put() vsock/virtio: Validate length in packet header before skb_put() vhost/vsock: Avoid allocating arbitrarily-sized SKBs vhost_net: basic in_order support vhost: basic in order support vhost: fail early when __vhost_add_used() fails vhost: Reintroduce kthread API and add mode selection vdpa: Fix IDR memory leak in VDUSE module exit vdpa/mlx5: Fix release of uninitialized resources on error path vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit virtio: virtio_dma_buf: fix missing parameter documentation vhost: Fix typos vhost: vringh: Remove unused functions vhost: vringh: Remove unused iotlb functions ... 
Pull virtio updates from Michael Tsirkin:

 - vhost can now support legacy threading if enabled in Kconfig

 - vsock memory allocation strategies for large buffers have been
   improved, reducing pressure on kmalloc

 - vhost now supports the in-order feature. guest bits missed the merge
   window.

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
  vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
  vsock/virtio: Rename virtio_vsock_skb_rx_put()
  vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
  vsock/virtio: Move SKB allocation lower-bound check to callers
  vsock/virtio: Rename virtio_vsock_alloc_skb()
  vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
  vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
  vsock/virtio: Validate length in packet header before skb_put()
  vhost/vsock: Avoid allocating arbitrarily-sized SKBs
  vhost_net: basic in_order support
  vhost: basic in order support
  vhost: fail early when __vhost_add_used() fails
  vhost: Reintroduce kthread API and add mode selection
  vdpa: Fix IDR memory leak in VDUSE module exit
  vdpa/mlx5: Fix release of uninitialized resources on error path
  vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
  virtio: virtio_dma_buf: fix missing parameter documentation
  vhost: Fix typos
  vhost: vringh: Remove unused functions
  vhost: vringh: Remove unused iotlb functions
  ...
drm/virtio: implement virtio_gpu_shutdown 2025-08-01T13:11:07+00:00 Gerd Hoffmann kraxel@redhat.com 2025-05-07T08:28:21+00:00 2507789a724d607fa9e162dcadeb9f51b071fc49 Calling drm_dev_unplug() is the drm way to say the device is gone and can not be accessed any more. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20250507082821.2710706-1-kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 
Calling drm_dev_unplug() is the drm way to say the device
is gone and can not be accessed any more.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20250507082821.2710706-1-kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>