The host1x hardware found on Tegra194 is mostly backwards compatible with the version found on Tegra186, with the notable exceptions of the increased number of syncpoints and mlocks. In addition, some rarely used features such as syncpoint wait bases were dropped and some registers had to move around to accomodate the increased number of syncpoints. Signed-off-by: Thierry Reding <treding@nvidia.com>
The number of syncpoints on Tegra186 is 576 and therefore no longer fits into 8 bits. Increase the size of the syncpoint ID field to 10 in order to accomodate all syncpoints. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The register region allocated per channel was decreased from 16384 bytes to 256 bytes on Tegra186 and later. Resize the region to make sure every channel (instead of only the first) is properly programmed. Suggested-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Functions taking a pointer to a host1x syncpoint as an argument don't need to specify a pointer to a host1x instance because it can be obtained from the syncpoint. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The job submission userspace ABI doesn't support this and there are no plans to implement it, so all of this code is dead and can be removed. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The disassembler for debug dumps was missing some newer host1x opcodes. Add disassembly support for these. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x driver prints out "disassembly" dumps of the command FIFO and gather contents on submission timeouts. However, the output has been quite difficult to read with unnecessary newlines and occasional missing parentheses. Fix these problems by using pr_cont to remove unnecessary newlines and by fixing other small issues. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The gather filter is a feature present on Tegra124 and newer where the hardware prevents GATHERed command buffers from executing commands normally reserved for the CDMA pushbuffer which is maintained by the kernel driver. This commit enables the gather filter on all supporting hardware. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Since Tegra186 the Host1x hardware allows syncpoints to be assigned to specific channels, preventing any other channels from incrementing them. Enable this feature where available and assign syncpoints to channels when submitting a job. Syncpoints are currently never unassigned from channels since that would require extra work and is unnecessary with the current channel allocation model. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the implementation of Host1x present on the Tegra186. The register space has been shuffled around a little bit, requiring addition of some chip-specific code sections. Tegra186 also adds several new features, most importantly the hypervisor, but those are not yet supported with this commit. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>