linux-toradex.git/drivers/gpu, branch v4.9.64

gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap

2017-11-21T08:23:26+00:00

[ Upstream commit 4b0ea93f250afc6c1128e201b0a8a115ae613e47 ]

Here, pci_iomap can fail, handle this case and return -ENOMEM.

Signed-off-by: Arvind Yadav 
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.com
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIAS

2017-11-21T08:23:25+00:00

[ Upstream commit 42f7f3c4811b3149253ecf2e133832c969884466 ]

Add module alias for Sony ACX565AKM LCD panel. This makes it probe on Nokia
N900 when panel driver is built as a module.

Signed-off-by: Jarkko Nikula 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache

2017-11-21T08:23:23+00:00

[ Upstream commit 1ae0d5af347df224a6e76334683f13a96d915a44 ]

Here, If devm_ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference. This error check
will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav 
Acked-by: Vincent Abriou 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Re-write the i2c address before EDID probing

2017-11-15T14:53:20+00:00

commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream.

I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.

Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.

Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID

2017-11-15T14:53:20+00:00

commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream.

Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.

This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally

2017-11-15T14:53:20+00:00

commit 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 upstream.

In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.

This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue

2017-11-15T14:53:20+00:00

commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream.

This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work
around mode set failure in 2D VMs")

With Wayland desktop and atomic mode set, during the mode setting
process there is a moment when two framebuffer sized surfaces
are being pinned.  This was not an issue with Xorg.

Since this only happens during a mode change, there should be no
performance impact by increasing allowable mem_size.

Signed-off-by: Sinclair Yeh 
Reviewed-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Do not rely on wm preservation for ILK watermarks

2017-11-15T14:53:18+00:00

commit 8777b927b92cf5b6c29f9f9d3c737addea9ac8a7 upstream.

The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.

It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst 
Acked-by: Ville Syrjälä 
Reviewed-by: Matt Roper 
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 28283f4f359cd7cfa9e65457bb98c507a2cd0cd0)
Signed-off-by: Rodrigo Vivi 
Signed-off-by: Greg Kroah-Hartman

drm: mali-dp: fix Lx_CONTROL register fields clobber

2017-11-15T14:53:13+00:00

[ Upstream commit c7ffa59cf03c38b91d6ef01e42c1b52fd7a4f285 ]

When updating the rotation fields, one of the assignments zeroes out the
rest of the register fields, which include settings for chroma siting,
inverse gamma, AMBA AXI caching, and alpha blending.

Signed-off-by: Mihail Atanassov 
Signed-off-by: Liviu Dudau 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm: drm_minor_register(): Clean up debugfs on failure

2017-11-15T14:53:12+00:00

[ Upstream commit a67834f8bfa1e2f48bb27d07b9a552ba7c3af82a ]

Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to
cover for failure in the drm_driver.debugfs_init callback.

Signed-off-by: Noralf Trønnes 
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman