linux-toradex.git/drivers/gpu, branch v6.0-rc4

Merge tag 'drm-intel-fixes-2022-09-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

2022-09-02T01:26:50+00:00

- Fix for a null pointer dereference (Lukasz)
- HDMI related quirk for ECS Liva Q2 with GLK graphics (Diego)
- Skip wm/ddb readout for disabled pipes (Ville)

Signed-off-by: Dave Airlie 

From: Rodrigo Vivi 
Link: https://patchwork.freedesktop.org/patch/msgid/YxC3GmSOpDiZTdIJ@intel.com

Merge tag 'drm-msm-fixes-2022-08-27' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

2022-09-01T19:58:52+00:00

Fixes for v6.0

- Fix for inconsistent indenting in function msm_dsi_dphy_timing_calc_v3.
  This fixes a smatch warning reported by kbot
- Fix to make eDP the first connector in the connected list. This was
  mainly done to address a screen corruption issue we were seeing on
  sc7280 boards which have eDP as the primary display. The corruption
  itself is from usermode but we decided to fix it this way because
  things work correct with the primary display as the first one for
  usermode
- Fix to populate intf_cfg correctly before calling reset_intf_cfg().
  Without this, the display pipeline is not torn down correctly for
  writeback
- Specify the correct number of DSI regulators for SDM660. It should
  have been 1 but 2 was mentioned
- Specify the correct number of DSI regulators for MSM8996. It should
  have been 3 but 2 was mentioned
- Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
  for DP. This was causing link training failures and hence no display
  for a specific DP to HDMI cable on chromebooks
- Fix probe-deferral crash in gpu devfreq
- Fix gpu debugfs deadlock

Signed-off-by: Dave Airlie 
From: Rob Clark 
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuY=jd44itwTkLXVqhnoKgY0BswPTrxDTxCiPG3WbmLA@mail.gmail.com

Merge tag 'amd-drm-fixes-6.0-2022-08-31' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

2022-09-01T19:56:25+00:00

amd-drm-fixes-6.0-2022-08-31:

amdgpu:
- FRU error message fix
- MES 11 updates
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Fix possible use after free in CS IOCTL
- SMU 13.0.x fixes
- Fix iolink reporting on devices with direct connections to CPU
- GFX10 tap delay firmware fixes

Signed-off-by: Dave Airlie 
From: Alex Deucher 
Link: https://patchwork.freedesktop.org/patch/msgid/20220831212312.5921-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2022-08-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

2022-09-01T06:15:05+00:00

- GVT fixes including fix for a CommetLake regression in mmio table
  and misc doc and typo fixes
- Fix CCS handling (Matt)
- Fix for guc requests after reset (Daniele)
- Display DSI related fixes (Jani)
- Display backlight related fixes (Arun, Jouni)

Signed-off-by: Dave Airlie 

From: Rodrigo Vivi 
Link: https://patchwork.freedesktop.org/patch/msgid/YwjCTDFm7clXPgEu@intel.com

drm/amd/amdgpu: skip ucode loading if ucode_size == 0

2022-08-31T21:02:20+00:00

Restrict the ucode loading check to avoid frontdoor loading error.

Signed-off-by: Chengming Gui 
Reviewed-by: Hawking Zhang 
Signed-off-by: Alex Deucher

drm/amdgpu: only init tap_delay ucode when it's included in ucode binary

2022-08-30T21:10:18+00:00

Not all the gfx10 variants need to integrate
global tap_delay and per se tap_delay firmwares

Only init tap_delay ucode when it does include in
rlc ucode binary so driver doesn't send a null buffer
to psp for firmware loading

Signed-off-by: Hawking Zhang 
Reviewed-by: Jack Gui 
Signed-off-by: Alex Deucher

drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypass

2022-08-30T21:09:31+00:00

[Why]
On secondary display hotplug we switch primary
stream from ODM2to1 to ODMBypass mode. Current
logic will trigger disabling front end for this
stream.

[How]
We need to check if prev_odm_pipe is equal to NULL
in order to disable dangling planes in this scenario.

Reviewed-by: Ariel Bernstein 
Acked-by: Brian Chang 
Signed-off-by: Vladimir Stempen 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Fix check for stream and plane

2022-08-30T21:09:01+00:00

[WHY]
Function wasn't returning false when it had a no stream

[HOW]
Made it return false when it had no stream.

Reviewed-by: Alvin Lee 
Acked-by: Brian Chang 
Signed-off-by: Ethan Wellenreiter 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Re-initialize viewport after pipe merge

2022-08-30T21:08:41+00:00

[Why]
Pipes get merged in preparation for SubVP but if they don't get used, and
are in ODM or some other multi pipe config, it would calculate the
voltage level with a viewport of just one pipe from when they were split
resulting in too low of a voltage level.

[How]
Made it so that the viewport and other timing settings get rebuilt and re-
initialized after the pipe merge, before calculating the voltage level so it
would calculate it correctly.

Reviewed-by: Alvin Lee 
Reviewed-by: Jun Lei 
Acked-by: Brian Chang 
Signed-off-by: Ethan Wellenreiter 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Use correct plane for CAB cursor size allocation

2022-08-30T21:08:07+00:00

[Why&How]
plane and stream variables used for cursor size allocation calculation
were stale from previous iteration. Redo the iteration to find the
correct cursor plane for the calculation.

Reviewed-by: Alvin Lee 
Acked-by: Brian Chang 
Signed-off-by: Aurabindo Pillai 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher