linux-toradex.git/drivers/hid/Kconfig, branch v4.10

Merge branches 'for-4.10/asus', 'for-4.10/cp2112', 'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus

2016-12-14T09:12:26+00:00

HID: cp2112: explicitly require irqchip support in gpiolib

2016-11-30T09:19:52+00:00

Since the gpio-as-irq support has been added, the driver now depends
on proper support being available in gpiolib.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Reported-by: kbuild test robot 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: asus: Add i2c touchpad support

2016-11-29T15:14:32+00:00

Update the hid-asus module to add multitouch support for the Asus i2c touchpad.

This patch aims to resolve the issue raised here:
https://bugzilla.kernel.org/show_bug.cgi?id=120181

The issue is in relation to an Asus touchpad device which currently does not
have multitouch support.

The device currently falls through to the hid-generic driver which
treats the device as a mouse.

This patch aims to add the multitouch support.

[jkosina@suse.cz: move most of the 'patch comment' into actual changelog]
[jkosina@suse.cz: drop hunk that changes ->name of the driver]
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Brendan McGrath 
Signed-off-by: Victor Vlasenko 
Signed-off-by: Frederik Wenigwieser 
Signed-off-by: Jiri Kosina

HID: udraw-ps3: Add support for the uDraw tablet for PS3

2016-11-15T13:20:05+00:00

This adds support for the THQ uDraw tablet for the PS3, as
4 separate device nodes, so that user-space can easily consume
events coming from the hardware.

Note that the touchpad two-finger support is fairly unreliable,
and a right-click can only be achieved with a two-finger tap
with the two fingers slightly apart (about 1cm should be enough).

Tested-by: Bastien Nocera 
Signed-off-by: Bastien Nocera 
Signed-off-by: Jiri Kosina

HID: Add new force feedback driver for Mayflash game controller adapters

2016-11-03T20:51:29+00:00

Add a new module named hid-mf that implements force feedback for game
controller adapters manufactured by Mayflash. Currently only the PS3 adapter is
supported, other adapters still need to be tested.

Signed-off-by: Marcel Hasler 
Signed-off-by: Jiri Kosina

Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', 'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus

2016-10-07T07:59:48+00:00

HID: hid-logitech: Documentation updates/corrections

2016-09-26T13:39:56+00:00

Signed-off-by: Simon Wood 
Signed-off-by: Jiri Kosina

HID: intel_ish-hid: ISH Transport layer

2016-08-17T09:13:07+00:00

The ISH transport layer (ishtp) is a bi-directional protocol implemented
on the top of PCI based inter processor communication layer. This layer
offers:
- Connection management
- Flow control with the firmware
- Multiple client sessions
- Client message transfer
- Client message reception
- DMA for RX and TX for fast data transfer

Refer to Documentation/hid/intel-ish-hid.txt for
overview of the functionality implemented in this layer.

Original-author: Daniel Drubin 
Reviewed-and-tested-by: Ooi, Joyce 
Tested-by: Grant Likely 
Tested-by: Rann Bar-On 
Tested-by: Atri Bhattacharya 
Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Jiri Kosina

HID: wacom: leds: handle the switch of the LEDs directly in the kernel

2016-08-05T11:39:20+00:00

The EKR switches the LED directly, and there is no point in having
userspace handling the switch it self when it's easy enough to do
in the kernel.

The other benefit is that now userspace does not need to have root access
to the LED but need only to read them with user privileges.

Signed-off-by: Benjamin Tissoires 
Acked-by: Ping Cheng 
Signed-off-by: Jiri Kosina

Merge branch 'for-4.8/hid-led' into for-linus

2016-07-28T08:49:23+00:00

Conflicts:
	drivers/hid/hid-thingm.c