linux-toradex.git/drivers/hid/hid-holtekff.c, branch v4.1.1 Linux kernel for Apalis and Colibri modules HID: hid-holtekff: don't push static constants on stack for %*ph 2013-08-05T09:29:57+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2013-08-02T11:08:00+00:00 9854a6f929956c9099dcc837157fd344f6f1c227 There is no need to pass constants via stack. The width may be explicitly specified in the format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
There is no need to pass constants via stack. The width may be explicitly
specified in the format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: use hid_hw_request() instead of direct call to usbhid 2013-02-25T12:26:41+00:00 Benjamin Tissoires benjamin.tissoires@gmail.com 2013-02-25T10:31:46+00:00 d881427253da011495f4193663d809d0e9dfa215 This allows the hid drivers to be independent from the transport layer. The patch was constructed by replacing all occurences of usbhid_submit_report() by its hid_hw_request() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. Finally, few drivers still depends on USB_HID. Many of them are requiring the io wait callback. They are found in the next patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> For the sensor-hub part: Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
This allows the hid drivers to be independent from the transport layer.

The patch was constructed by replacing all occurences of
usbhid_submit_report() by its hid_hw_request() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.

Finally, few drivers still depends on USB_HID. Many of them
are requiring the io wait callback. They are found in the next patch.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For the sensor-hub part:
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: Use module_hid_driver macro 2013-01-03T09:27:31+00:00 H Hartley Sweeten hartleys@visionengravers.com 2012-12-17T22:28:26+00:00 f425458eafd51b6b5ab64f407922e1198c567cb2 Use the new module_hid_driver macro in all HID drivers that have a simple register/unregister init/exit. This also converts the hid drivers that test for a failure of hid_register_driver() and report the failure. Using module_hid_driver in those drivers removes the failure message. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
Use the new module_hid_driver macro in all HID drivers that have
a simple register/unregister init/exit.

This also converts the hid drivers that test for a failure of
hid_register_driver() and report the failure. Using module_hid_driver
in those drivers removes the failure message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: holtekff: use %*ph to dump small buffers 2012-09-10T21:00:32+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2012-09-05T12:00:43+00:00 e2e78e71d1a3d721beaaab591f3d6c4886ef21a4 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid: Add module.h to fix up implicit users of it 2011-10-31T23:31:17+00:00 Paul Gortmaker paul.gortmaker@windriver.com 2011-07-03T17:39:48+00:00 8f86a2c3cb90e8bb0733de2d2b0abbe7050bb536 A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in clocksource are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> 
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in clocksource
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
HID: add FF support for Holtek On Line Grip based gamepads 2011-06-27T10:40:00+00:00 Anssi Hannula anssi.hannula@iki.fi 2011-06-26T21:07:31+00:00 d946e65e2ab885c05b8cacf292be65fa292d08f6 Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
Add force feedback support for Holtek On Line Grip based HID devices.

The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.

Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>