linux-toradex.git/drivers/hid/i2c-hid, branch v5.3-rc3

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2019-06-13T15:59:05+00:00

Pull HID fixes from Jiri Kosina:

 - regression fixes (reverts) for module loading changes that turned out
   to be incompatible with some userspace, from Benjamin Tissoires

 - regression fix for special Logitech unifiying receiver 0xc52f, from
   Hans de Goede

 - a few device ID additions to logitech driver, from Hans de Goede

 - fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason
   Gerecke

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix 064d:c52f receiver support
  Revert "HID: core: Call request_module before doing device_add"
  Revert "HID: core: Do not call request_module() in async context"
  Revert "HID: Increase maximum report size allowed by hid_field_extract()"
  HID: a4tech: fix horizontal scrolling
  HID: hyperv: Add a module description line
  HID: logitech-hidpp: Add support for the S510 remote control
  HID: multitouch: handle faulty Elo touch device
  HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
  HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
  HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
  HID: wacom: Don't report anything prior to the tool entering range
  HID: wacom: Don't set tool type until we're in range
  HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
  HID: logitech-hidpp: add support for the MX5500 keyboard
  HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
  HID: i2c-hid: add iBall Aer3 to descriptor override

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

HID: i2c-hid: add iBall Aer3 to descriptor override

2019-05-09T19:27:27+00:00

This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override
list.

BugLink: https://bugs.launchpad.net/bugs/1825718
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Jiri Kosina

Revert "HID: i2c-hid: Disable runtime PM on Synaptics touchpad"

2019-04-11T09:14:34+00:00

This reverts commit 74e7c6c877f620d65a8269692d089bbd066f626c.

It finally turns out the touchpad is an engineering sample and it is
not the Synaptics touchpad. Let us revert this patch otherwise it will
affect the real Synaptics touchpad.

Signed-off-by: Hui Wang 
Signed-off-by: Jiri Kosina

HID: i2c-hid: Disable runtime PM on Synaptics touchpad

2019-04-01T13:57:38+00:00

We have a new Dell laptop which has the synaptics I2C touchpad
(06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't
work, there is no interrupt when touching the touchpad, after
disable the runtime PM, everything works well.

I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is
better after applied this quirk, there are interrupts but data it
reports is invalid.

Signed-off-by: Hui Wang 
Signed-off-by: Jiri Kosina

Merge branch 'for-5.1/i2c-hid' into for-linus

2019-03-05T14:42:51+00:00

Fix dmesg flood for Elan touchpanels which are too slow to assert IRQ from Kai-Heng Feng

HID: i2c-hid: Ignore input report if there's no data present on Elan touchpanels

2019-01-21T09:46:18+00:00

While using Elan touchpads, the message floods:
[  136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535)

Though the message flood is annoying, the device it self works without
any issue. I suspect that the device in question takes too much time to
pull the IRQ back to high after I2C host has done reading its data.

Since the host receives all useful data, let's ignore the input report
when there's no data.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Benjamin Tissoires

HID: i2c-hid: Disable runtime PM on Goodix touchpad

2019-01-14T11:17:51+00:00

A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ
but there's no input event from HID subsystem.

Turns out it reports some invalid data:
[   22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00

After some trial and error, it's another device that doesn't work well
with ON/SLEEP commands. Disable runtime PM to fix the issue.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Jiri Kosina

HID: i2c-hid: Add Odys Winbook 13 to descriptor override

2019-01-03T10:31:18+00:00

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not
supply descriptors, add this to the DMI descriptor override list, fixing
the touchpad not working.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312
Reported-by: Rene Wagner 
Signed-off-by: Hans de Goede 
Signed-off-by: Jiri Kosina

HID: i2c-hid: Disable runtime PM for LG touchscreen

2018-11-19T15:27:00+00:00

LG touchscreen (1fd2:8001) stops working after reboot:
[ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device.

The device in question stops working after receives SLEEP, ON, SLEEP
commands in a short period. The scenario is like this:
- Once the desktop session closes, it also closed the hid device, so the
device gets runtime suspended and receives a SLEEP command.
- Before calling shutdown callback, it gets runtime resumed and received
an ON command.
- In the shutdown callback, it receives another SLEEP command.

I failed to find a reliable interval between ON/SLEEP commands that can
make it work, so let's simply disable runtime PM for the device.

Signed-off-by: Kai-Heng Feng 
Signed-off-by: Jiri Kosina