commit 44d27f7dfedd9aadc082cda31462f6600f56e4ec upstream. On big-endian systems (e.g., Apple PowerBook), trying to use a logitech wireless mouse with the Logitech Unifying Receiver does not work with v3.2 and later kernels. The device doesn't show up in /dev/input. Older kernels work fine. That is because the new hid-logitech-dj driver claims the device. The device arrival notification appears: 20 00 41 02 00 00 00 00 00 00 00 00 00 00 00 and we read the report_types bitfield (02 00 00 00) to find out what kind of device it is. Unfortunately the driver only reads the first 8 bits and treats that value as a 32-bit little-endian number, so on a powerpc the report type seems to be 0x02000000 and is not recognized. Even on little-endian machines, connecting a media center remote control (report type 00 01 00 00) with this driver loaded would presumably fail for the same reason. Fix both problems by using get_unaligned_le32() to read all four bytes, which is a little clearer anyway. After this change, the wireless mouse works on Hugo's PowerBook again. Based on a patch by Nestor Lopez Casado. Addresses http://bugs.debian.org/671292 Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar> Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8815bb09af21316aeb5f8948b24ac62181670db2 upstream. On some HCDs usb_unlink_urb() can directly call the completion handler. That limits the spinlocks that can be taken in the handler to locks not held while calling usb_unlink_urb() To prevent a race with resubmission, this patch exposes usbcore's infrastructure for blocking submission, uses it and so drops the lock without causing a race in usbhid. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74b89e8a3625c17c7452532dfb997ac4f1a38751 upstream. We incorrectly parse incoming IR data. The extra byte contains the upper bits and not the lower bits of the x/y coordinates. User-space expects absolute position data from us so this patch does not break existing applications. On the contrary, it extends the virtual view and fixes garbage reports for margin areas of the virtual screen. Reported-by: Peter Bukovsky <bukovsky.peter@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull HID fixes from Jiri Kosina: "Fix for one particular device (bluetooth Tivo Slide) and change of 'default y' -> 'default n' for CONFIG_HID_BATTERY_STRENGTH which I overlooked in the initial merge of the battery support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: default HID_BATTERY_STRENGTH to no HID: tivo: fix support for bluetooth version of tivo Slide
Commit 4f5ca836b "HID: hid-input: add support for HID devices reporting Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report the battery strength of HID devices. The commit log explicitly mentions it not working properly with recent userspace, but it is default y anyway. This is rather odd, and actually causes problems on real systems. This works around Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=806295 Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The device is a bluetooth device, but one occurence by mistake had marked it as USB. Reported-by: Joshua Dillon <jvdillon@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull media updates from Mauro Carvalho Chehab: - V4L2 API additions to better support JPEG compression control - media API additions to properly support MPEG decoders - V4L2 API additions for image crop/scaling - a few other V4L2 API DocBook fixes/improvements - two new DVB frontend drivers: m88rs2000 and rtl2830 - two new DVB drivers: az6007 and rtl28xxu - a framework for ISA drivers, that removed lots of common code found at the ISA radio drivers - a new FM transmitter driver (radio-keene) - a GPIO-based IR receiver driver - a new sensor driver: mt9m032 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv, vs6624 - several new board additions, driver fixes, improvements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits) [media] update CARDLIST.em28xx [media] partially reverts changeset fa5527c [media] stb0899: fix the limits for signal strength values [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e) [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e) [media] -EINVAL -> -ENOTTY [media] gspca - sn9c20x: Cleanup source [media] gspca - sn9c20x: Simplify register write for capture start/stop [media] gspca - sn9c20x: Add automatic JPEG compression mechanism [media] gspca - sn9c20x: Greater delay in case of sensor no response [media] gspca - sn9c20x: Optimize the code of write sequences [media] gspca - sn9c20x: Add the JPEG compression quality control [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset [media] gspca - sn9c20x: Propagate USB errors to higher level [media] gspca - sn9c20x: Use the new video control mechanism [media] gspca - sn9c20x: Fix loss of frame start [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5 ...
Pull input subsystem updates from Dmitry Torokhov:
"- we finally merged driver for USB version of Synaptics touchpads
(I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);
- a bunch of new drivers for embedded platforms (Cypress
touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
touchscreens, TI touchscreen);
- input core allows clients to specify desired clock source for
timestamps on input events (EVIOCSCLOCKID ioctl);
- input core allows querying state of all MT slots for given event
code via EVIOCGMTSLOTS ioctl;
- various driver fixes and improvements."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: ili210x - add support for Ilitek ILI210x based touchscreens
Input: altera_ps2 - use of_match_ptr()
Input: synaptics_usb - switch to module_usb_driver()
Input: convert I2C drivers to use module_i2c_driver()
Input: convert SPI drivers to use module_spi_driver()
Input: omap4-keypad - move platform_data to <linux/platform_data>
Input: kxtj9 - who_am_i check value and initial data rate fixes
Input: add driver support for MAX8997-haptic
Input: tegra-kbc - revise device tree support
Input: of_keymap - add device tree bindings for simple key matrices
Input: wacom - fix physical size calculation for 3rd-gen Bamboo
Input: twl4030-vibra - really switch from #if to #ifdef
Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
Input: max8925_onkey - avoid accessing input device too early
Input: max8925_onkey - allow to be used as a wakeup source
Input: atmel-wm97xx - convert to dev_pm_ops
Input: atmel-wm97xx - set driver owner
Input: add cyttsp touchscreen maintainer entry
Input: cyttsp - remove useless checks in cyttsp_probe()
Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
...
Pull HID updates from Jiri Kosina: "It contains HID driver updates all over the place -- a lot of new hardware support especially in the multitouch area, including generic handling of all multitouch devices by the hid-multitiouch driver automatically." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits) HID: multitouch: add PID for Fructel product HID: wacom: Add reporting of wheel for Intuos4 WL HID: wacom: Replace __set_bit with input_set_capability HID: tivo: add support for BT-version (0x1200) HID: wacom: Reset stylus buttons - Intuos4 WL HID: multitouch: detect serial protocol HID: handle all multitouch devices through hid-multitouch HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T HID: make it possible to force hid-core claim the device HID: multitouch: add support for eGalax 0x722a HID: usbhid: add quirk no_get for quanta 3008 devices HID: multitouch: add more eGalax devices HID: multitouch: add new PID from Ideacom HID: multitouch: add support for Atmel maXTouch 03eb:2118 HID: waltop: Add support for tablet with PID 0038 HID: waltop: Replace original rdescs with links HID: uclogic: Replace original rdescs with links HID: wacom: Add pad buttons reporting on Intuos4 WL HID: wacom: report distance for Intuos4 WL HID: kye: Add support for 3 tablets ...