linux-toradex.git/drivers/hv/hv.c, branch v4.10

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12+00:00

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: John Stultz

hv: change clockevents unbind tactics

2016-12-06T10:10:54+00:00

To get prepared to CPU offlining support we need co change the way how we
unbind clockevent devices. As one CPU may go online/offline multiple times
we need to bind it in hv_synic_init() and unbind it in hv_synic_cleanup().
There is an additional corner case: when we unload the module completely we
need to switch to some other clockevent mechanism before stopping VMBus or
we will hang. We can't call hv_synic_cleanup() before unloading VMBus as
we won't be able to send UNLOAD request and get a response so
hv_synic_clockevents_cleanup() has to live. Luckily, we can always call
clockevents_unbind_device(), even if it wasn't bound before and there is
no issue if we call it twice.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: avoid vfree() on crash

2016-08-31T11:05:40+00:00

When we crash from NMI context (e.g. after NMI injection from host when
'sysctl -w kernel.unknown_nmi_panic=1' is set) we hit

    kernel BUG at mm/vmalloc.c:1530!

as vfree() is denied. While the issue could be solved with in_nmi() check
instead I opted for skipping vfree on all sorts of crashes to reduce the
amount of work which can cause consequent crashes. We don't really need to
free anything on crash.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Support handling messages on multiple CPUs

2016-03-02T00:57:20+00:00

Starting with Windows 2012 R2, message inteerupts can be delivered
on any VCPU in the guest. Support this functionality.

Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: don't manipulate with clocksources on crash

2016-02-08T05:34:12+00:00

clocksource_change_rating() involves mutex usage and can't be called
in interrupt context. It also makes sense to avoid doing redundant work
on crash.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Cleanup vmbus_set_event()

2016-02-08T05:32:57+00:00

Cleanup vmbus_set_event() by inlining the hypercall to post
the event and since the return value of vmbus_set_event() is not checked,
make it void. As part of this cleanup, get rid of the function
hv_signal_event() as it is only callled from vmbus_set_event().

Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

drivers/hv: correct tsc page sequence invalid value

2015-12-15T03:15:05+00:00

Hypervisor Top Level Functional Specification v3/4 says
that TSC page sequence value = -1(0xFFFFFFFF) is used to
indicate that TSC page no longer reliable source of reference
timer. Unfortunately, we found that Windows Hyper-V guest
side implementation uses sequence value = 0 to indicate
that Tsc page no longer valid. This is clearly visible
inside Windows 2012R2 ntoskrnl.exe HvlGetReferenceTime()
function dissassembly:

HvlGetReferenceTime proc near
                 xchg    ax, ax
loc_1401C3132:
                 mov     rax, cs:HvlpReferenceTscPage
                 mov     r9d, [rax]
                 test    r9d, r9d
                 jz      short loc_1401C3176
                 rdtsc
                 mov     rcx, cs:HvlpReferenceTscPage
                 shl     rdx, 20h
                 or      rdx, rax
                 mov     rax, [rcx+8]
                 mov     rcx, cs:HvlpReferenceTscPage
                 mov     r8, [rcx+10h]
                 mul     rdx
                 mov     rax, cs:HvlpReferenceTscPage
                 add     rdx, r8
                 mov     ecx, [rax]
                 cmp     ecx, r9d
                 jnz     short loc_1401C3132
                 jmp     short loc_1401C3184
loc_1401C3176:
                 mov     ecx, 40000020h
                 rdmsr
                 shl     rdx, 20h
                 or      rdx, rax
loc_1401C3184:
                 mov     rax, rdx
                 retn
HvlGetReferenceTime endp

This patch aligns Tsc page invalid sequence value with
Windows Hyper-V guest implementation which is more
compatible with both Hyper-V hypervisor and KVM hypervisor.

Signed-off-by: Andrey Smetanin 
Signed-off-by: Denis V. Lunev 
CC: "K. Y. Srinivasan" 
CC: Haiyang Zhang 
CC: Vitaly Kuznetsov 

Signed-off-by: Denis V. Lunev 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

drivers:hv: Export the API to invoke a hypercall on Hyper-V

2015-12-15T03:12:21+00:00

This patch exposes the function that hv_vmbus.ko uses to make hypercalls.  This
is necessary for retargeting an interrupt when it is given a new affinity.

Since we are exporting this API, rename the API as it will be visible outside
the hv.c file.

Signed-off-by: Jake Oshins 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: fix build warning

2015-12-14T21:34:50+00:00

We were getting build warning about unused variable "tsc_msr" and
"va_tsc" while building for i386 allmodconfig.

Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Implement a clocksource based on the TSC page

2015-08-05T18:44:29+00:00

The current Hyper-V clock source is based on the per-partition reference counter
and this counter is being accessed via s synthetic MSR - HV_X64_MSR_TIME_REF_COUNT.
Hyper-V has a more efficient way of computing the per-partition reference
counter value that does not involve reading a synthetic MSR. We implement
a time source based on this mechanism.

Tested-by: Vivek Yadav 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman