linux-toradex.git/drivers/hwmon/Kconfig, branch v3.0.80

hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804

2012-03-12T17:33:00+00:00

commit 1bd612a25855f4cc9345052b53d7da697dba6358 upstream.

Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000

2012-03-12T17:33:00+00:00

commit 4de86126a712ba83fa038d277c8282f7ed466a4b upstream.

These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (f71882fg) Add support for the F71869A

2011-07-03T11:32:53+00:00

The F71869A is almost the same as the F71869F/E, except that it has
the normal number of temp and pwm zones for a F71882FG derived chip,
rather then the limited number of the F71869F/E.

Signed-off-by: Hans de Goede 
Tested-by: Max Baldwin 
Acked-by: Guenter Roeck 
Signed-off-by: Jean Delvare

hwmon: New driver for the SMSC EMC6W201

2011-05-25T18:43:33+00:00

This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.

Signed-off-by: Jean Delvare 
Tested-by: Harry G McGavran Jr 
Tested-by: Jeff Rickman 
Acked-by: Guenter Roeck

hwmon: (abituguru) Depend on DMI

2011-05-25T18:43:33+00:00

The abituguru drivers are only built on X86, where DMI support is now
enabled by default. So let these drivers depend on DMI, for the
following gains:
* Robustness and safety. Detection of these devices is weak and uses
  non-standard methods, it should really be limited to Abit boards
  unless the user explicitly asks otherwise.
* Code simplicity. The code is easier to read without ifdefs.
* Better build testing coverage. Now there's only one way to build the
  drivers, so no risk of build failure on exotic systems.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck 
Acked-by: Alistair John Strachan 
Acked-by: Hans de Goede

Move ACPI power meter driver to hwmon

2011-05-25T18:43:32+00:00

As discussed earlier, the ACPI power meter driver would better live
in drivers/hwmon, as its only purpose is to create hwmon-style
interfaces for ACPI 4.0 power meter devices. Users are more likely to
look for it there, and less likely to accidentally hide it by
unselecting its dependencies.

Signed-off-by: Jean Delvare 
Acked-by: "Darrick J. Wong" 
Acked-by: Guenter Roeck 
Cc: Len Brown

hwmon: (f71882fg) Add support for F71808A

2011-05-25T18:43:32+00:00

Signed-off-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (asc7621) Drop duplicate dependency

2011-05-25T18:43:32+00:00

The config SENSORS_ASC7621 entry is inside an if HWMON / endif block,
so it already depends on HWMON.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck

hwmon: Add driver for AMD family 15h processor power information

2011-05-25T18:43:31+00:00

This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann 
Signed-off-by: Jean Delvare

hwmon: (k10temp) Add support for Fam15h (Bulldozer)

2011-05-25T18:43:31+00:00

AMDs upcoming CPUs use the same mechanism for the internal
temperature reporting as the Fam10h CPUs, so we just needed to add
the appropriate PCI-ID to the list.
This allows to use the k10temp driver on those CPUs.
While at it change the Kconfig entry to be more generic.

Signed-off-by: Andre Przywara 
Acked-by: Clemens Ladisch 
Signed-off-by: Jean Delvare