linux-toradex.git/drivers/hwmon/Kconfig, branch v3.4.59

hwmon: (k10temp) Add support for AMD Trinity CPUs

2012-04-01T17:25:56+00:00

The on-chip northbridge's temperature sensor of the upcoming
AMD Trinity CPUs works the same as for the previous CPUs.
Since it has a different PCI-ID, we just add the new one to the list
supported by k10temp.
This allows to use the k10temp driver on those CPUs.

Signed-off-by: Andre Przywara 
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck

hwmon: (sht15) Fix Kconfig dependencies

2012-04-01T17:09:53+00:00

sht15 depends on GPIOLIB, not on GENERIC_GPIO.

This fixes the following build error, seen if GPIOLIB is not defined:

src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_direction_input': => 293:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_direction_output': => 216:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_free': => 1000:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_get_value': => 296:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_request': => 946:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_set_value': => 218:2
src/drivers/hwmon/sht15.c: error: implicit declaration of function 'gpio_to_irq': => 514:2

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare

hwmon: (gpio-fan) Fix Kconfig dependencies

2012-04-01T17:09:52+00:00

gpio-fan depends on GPIOLIB, not on GENERIC_GPIO.

This fixes the following build error, seen if GPIOLIB is not defined:

src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_direction_output': => 372:3
src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_free': => 130:2
src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_get_value': => 79:2
src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_request': => 98:2
src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_set_value': => 156:3
src/drivers/hwmon/gpio-fan.c: error: implicit declaration of function 'gpio_to_irq': => 114:2

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare 
Acked-by: Simon Guinot

hwmon: Add MCP3021 ADC driver

2012-03-23T09:02:20+00:00

Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.

Signed-off-by: Mingkai Hu 
Signed-off-by: Xie Xiaobo 
Signed-off-by: Jean Delvare

hwmon: (mc13783-adc) Add support for the MC13892 PMIC

2012-03-23T09:02:19+00:00

Based on a patch by David Jander that mostly did s/mc13783/mc13xxx/ .

Additionally use dev_get_drvdata instead of to_platform_device +
platform_get_drvdata in mc13783_adc_read (spotted by Jean Delvare).

Cc: David Jander 
Signed-off-by: Uwe Kleine-Koenig 
Signed-off-by: Jean Delvare

hwmon: (lm90) Add support for GMT G781

2012-03-23T09:02:18+00:00

GMT G781 is a ADM1032-compatible temperature sensor chip.
Add support to the LM90 driver.

Cc: Mike Gorchak 
Signed-off-by: Guenter Roeck 
Signed-off-by: Jean Delvare

hwmon: (w83795) Unconditionally support manual fan speed control

2012-03-23T09:02:17+00:00

Manual fan speed control uses a standard interface and has received
sufficient testing and review by now, it can be enabled
unconditionally. This includes attributes pwm[1-8], pwm[1-8]_enable,
pwm[1-8]_mode and pwm[1-8]_freq.

We only let the user switch from automatic mode to manual mode, but
not the other way around, as automatic control settings may not have
been set properly by the BIOS.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck

hwmon: (sch56xx) Add support for the integrated watchdog (v2)

2012-03-20T13:42:05+00:00

Add support for the watchdog integrated into the SMSC SCH5627 and
SCH5636 superio-s. Since the watchdog is part of the hwmon logical device
and thus shares ioports with it, the watchdog driver is integrated into the
existing hwmon drivers for these.

Note that this version of the watchdog support for sch56xx superio-s
implements the watchdog chardev interface itself, rather then relying on
the recently added watchdog core / watchdog_dev. This is done because
currently some needed functionality is missing from watchdog_dev, as soon
as this functionality is added (which is being discussed on the
linux-watchdog mailinglist), I'll convert this driver over to using
watchdog_dev.

Signed-off-by: Hans de Goede 
[guenter.roeck@ericsson.com: Added missing linux/slab.h include]
Signed-off-by: Guenter Roeck

hwmon: (lm80) Add detection of NatSemi/TI LM96080

2012-03-19T01:27:43+00:00

Add detection of the National Semiconductor (now Texas Instruments)
LM96080. It is functionally compatible with the LM80 but detection is
completely different.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Cc: Frans Meulenbroeks 
Signed-off-by: Guenter Roeck

hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804

2012-03-07T17:48:44+00:00

Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck 
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare