linux-toradex.git/drivers/hwmon/Kconfig, branch v6.11-rc7 Linux kernel for Apalis and Colibri modules Merge tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging 2024-07-16T00:39:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-07-16T00:39:13+00:00 500a711df663adccb30fd3508960ff90c73f1cd4 Pull hwmon updates from Guenter Roeck: "Obsolete driver removals: - Removed obsolete adm1021 and max6642 drivers New drivers: - MPS MP2891, MP2993, MP9941, and MP5920 - SPD5118 (Temperature Sensor and EEPROM) Added device support to existing drivers: - g762: G761 - dell-smm: Dell OptiPlex 7060 - asus-ec-sensors: ProArt X670E-CREATOR WIFI - corsair-psu: HX1200i Series 2023 psu - nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller Notable enhancements and fixes: - Removed use of i2c_match_id() - Constified struct regmap_config where feasible - Cleaned up amc6821 driver, and converted to use regmap and with_info API - Converted max6639 driver to use with_info API; added support for additional sysfs attributes - Fixed various sysfs attribute underflows - Added PEC support to hwmon core, and use in lm90 and max31827 drivers And various other minor fixes and improvements" * tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits) hwmon: (max6697) Fix swapped temp{1,8} critical alarms hwmon: (max6697) Fix underflow when writing limit attributes hwmon: Remove obsolete adm1021 and max6642 drivers hwmon: (pmbus/ltc4286) Drop unused i2c device ids hwmon: (g762) Initialize fans after configuring clock hwmon: (amc6821) Add support for pwm1_mode attribute hwmon: (amc6821) Convert to with_info API hwmon: (amc6821) Convert to use regmap hwmon: (amc6821) Drop unnecessary enum chips hwmon: (amc6821) Use BIT() and GENMASK() hwmon: (amc6821) Use tabs for column alignment in defines hwmon: (amc6821) Reorder include files, drop unnecessary ones hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 hwmon: (amc6821) Rename fan1_div to fan1_pulses hwmon: (amc6821) Make reading and writing fan speed limits consistent hwmon: (amc6821) Stop accepting invalid pwm values hwmon: (w83627ehf) Fix underflows seen when writing limit attributes hwmon: (nct6775-core) Fix underflows seen when writing limit attributes hwmon: (lm95234) Fix underflows seen when writing limit attributes hwmon: (adc128d818) Fix underflows seen when writing limit attributes ... 
Pull hwmon updates from Guenter Roeck:
 "Obsolete driver removals:

   - Removed obsolete adm1021 and max6642 drivers

  New drivers:

   - MPS MP2891, MP2993, MP9941, and MP5920

   - SPD5118 (Temperature Sensor and EEPROM)

  Added device support to existing drivers:

   - g762: G761

   - dell-smm: Dell OptiPlex 7060

   - asus-ec-sensors: ProArt X670E-CREATOR WIFI

   - corsair-psu: HX1200i Series 2023 psu

   - nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller

  Notable enhancements and fixes:

   - Removed use of i2c_match_id()

   - Constified struct regmap_config where feasible

   - Cleaned up amc6821 driver, and converted to use regmap and
     with_info API

   - Converted max6639 driver to use with_info API; added support for
     additional sysfs attributes

   - Fixed various sysfs attribute underflows

   - Added PEC support to hwmon core, and use in lm90 and max31827
     drivers

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
  hwmon: (max6697) Fix swapped temp{1,8} critical alarms
  hwmon: (max6697) Fix underflow when writing limit attributes
  hwmon: Remove obsolete adm1021 and max6642 drivers
  hwmon: (pmbus/ltc4286) Drop unused i2c device ids
  hwmon: (g762) Initialize fans after configuring clock
  hwmon: (amc6821) Add support for pwm1_mode attribute
  hwmon: (amc6821) Convert to with_info API
  hwmon: (amc6821) Convert to use regmap
  hwmon: (amc6821) Drop unnecessary enum chips
  hwmon: (amc6821) Use BIT() and GENMASK()
  hwmon: (amc6821) Use tabs for column alignment in defines
  hwmon: (amc6821) Reorder include files, drop unnecessary ones
  hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
  hwmon: (amc6821) Rename fan1_div to fan1_pulses
  hwmon: (amc6821) Make reading and writing fan speed limits consistent
  hwmon: (amc6821) Stop accepting invalid pwm values
  hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
  hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
  hwmon: (lm95234) Fix underflows seen when writing limit attributes
  hwmon: (adc128d818) Fix underflows seen when writing limit attributes
  ...
hwmon: Remove obsolete adm1021 and max6642 drivers 2024-07-14T18:48:43+00:00 Guenter Roeck linux@roeck-us.net 2024-07-12T17:27:26+00:00 ed99ae74f2328e42286880c946953a8f9dd95a7e ADM1021, MAX6642, and compatible chips are supported by the lm90 driver. Remove the obsolete stand-alone drivers to reduce maintenance overhead. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
ADM1021, MAX6642, and compatible chips are supported by the lm90 driver.
Remove the obsolete stand-alone drivers to reduce maintenance overhead.

Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (amc6821) Convert to use regmap 2024-07-08T14:52:36+00:00 Guenter Roeck linux@roeck-us.net 2024-06-27T17:48:27+00:00 a051d507ba1718e0e833f3d8d80defc85ca20c2d Use regmap for register accesses and caching. While at it, use sysfs_emit() instead of sprintf() to write sysfs attribute data, and remove spurious debug messages which would only be seen as result of a bug in the code. Also make sure that error codes are propagated and not replaced with -EIO. While at it, introduce rounding of written temperature values and for internal calculations to reduce deviation from written values and as much as possible. No functional change intended except for differences introduced by rounding. Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Use regmap for register accesses and caching.

While at it, use sysfs_emit() instead of sprintf() to write sysfs
attribute data, and remove spurious debug messages which would only
be seen as result of a bug in the code. Also make sure that error
codes are propagated and not replaced with -EIO.

While at it, introduce rounding of written temperature values and for
internal calculations to reduce deviation from written values and as
much as possible.

No functional change intended except for differences introduced by
rounding.

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (spd5118) Add configuration option for auto-detection 2024-06-10T16:13:41+00:00 Guenter Roeck linux@roeck-us.net 2024-06-03T05:31:52+00:00 9ecc129470bcd3505c972b91dc402b8538e9cd9c With SPD5118 chip detection for the most part handled by the i2c-smbus core using DMI information, the spd5118 driver no longer needs to auto-detect spd5118 compliant chips. Auto-detection by the driver is still needed on systems with no DMI support or on systems with more than eight DIMMs and can not be removed entirely. However, it affects boot time and introduces the risk of mis-identifying chips. Add configuration option to be able to disable it on systems where chip detection is handled outside the driver. Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
With SPD5118 chip detection for the most part handled by the i2c-smbus
core using DMI information, the spd5118 driver no longer needs to
auto-detect spd5118 compliant chips.

Auto-detection by the driver is still needed on systems with no DMI support
or on systems with more than eight DIMMs and can not be removed entirely.
However, it affects boot time and introduces the risk of mis-identifying
chips. Add configuration option to be able to disable it on systems where
chip detection is handled outside the driver.

Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: Add support for SPD5118 compliant temperature sensors 2024-06-10T16:13:41+00:00 Guenter Roeck linux@roeck-us.net 2024-05-27T17:49:10+00:00 09262e9814ca0851c937cab1f26df4ab207885a1 Add support for SPD5118 (Jedec JESD300) compliant temperature sensors. Such sensors are typically found on DDR5 memory modules. Cc: René Rebe <rene@exactcode.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Stephen Horvath <s.horvath@outlook.com.au> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add support for SPD5118 (Jedec JESD300) compliant temperature
sensors. Such sensors are typically found on DDR5 memory modules.

Cc: René Rebe <rene@exactcode.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Stephen Horvath <s.horvath@outlook.com.au>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: add ChromeOS EC driver 2024-06-03T04:13:43+00:00 Thomas Weißschuh linux@weissschuh.net 2024-05-29T06:27:12+00:00 bc3e45258096f2ea2116302abefde4b1cb9bc3c1 The ChromeOS Embedded Controller exposes fan speed and temperature readings. Expose this data through the hwmon subsystem. The driver is designed to be probed via the cros_ec mfd device. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-2-5cdf0c5db50a@weissschuh.net [tzungbi: Fixed typo in MAINTAINERS: "chros_ec_hwmon" -> "cros_ec_hwmon"] Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> 
The ChromeOS Embedded Controller exposes fan speed and temperature
readings.
Expose this data through the hwmon subsystem.

The driver is designed to be probed via the cros_ec mfd device.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-2-5cdf0c5db50a@weissschuh.net
[tzungbi: Fixed typo in MAINTAINERS: "chros_ec_hwmon" -> "cros_ec_hwmon"]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
hwmon: (max6639) Use regmap 2024-05-03T16:20:04+00:00 Naresh Solanki naresh.solanki@9elements.com 2024-05-03T12:00:19+00:00 45bf8305fb2ef684e53fd0dcf1cc7e7b456f3478 Add regmap support & remove local caching. Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://lore.kernel.org/r/20240503120020.3450972-1-naresh.solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add regmap support & remove local caching.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240503120020.3450972-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: Add EC Chip driver for Lenovo ThinkStation motherboards 2024-04-30T17:31:26+00:00 David Ober dober6023@gmail.com 2024-03-28T12:12:50+00:00 70118f85e6538f5c376f57a3e8d621f1f3448754 This addition adds in the ability for the system to scan the EC chip in the Lenovo ThinkStation systems to get the current fan RPM speeds the Maximum speed value for each fan also provides the CPU, DIMM other thermal statuses Signed-off-by: David Ober <dober6023@gmail.com> Link: https://lore.kernel.org/r/20240328121250.331146-1-dober6023@gmail.com [groeck: Dropped pointless case statements] [Colin King: Fixed spelling error accesssible -> accessible] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
This addition adds in the ability for the system to scan
the EC chip in the Lenovo ThinkStation systems to get the
current fan RPM speeds the Maximum speed value for each
fan also provides the CPU, DIMM other thermal statuses

Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20240328121250.331146-1-dober6023@gmail.com
[groeck: Dropped pointless case statements]
[Colin King: Fixed spelling error accesssible -> accessible]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (pwm-fan) Make use of device properties 2024-04-28T17:08:33+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-04-04T19:11:39+00:00 dfd977d85b15bd69fbf39361f216feae115cd735 Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: add HAS_IOPORT dependencies 2024-04-28T17:08:33+00:00 Niklas Schnelle schnelle@linux.ibm.com 2024-04-04T12:47:00+00:00 523315a9111bf73672ba3693b5ecb3c1b47b07b2 In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them. Acked-by: Guenter Roeck <linux@roeck-us.net> Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>