The device is able to monitor temperature, voltage and current of each of
the four outputs. Add basic support for monitoring the temperature of the
four outputs and the die temperature.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250723-mc33xs2410-hwmon-v5-2-f62aab71cd59@liebherr.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>

Pull char / misc / iio driver updates from Greg KH:
 "Here is the big char/misc/iio and other small driver subsystem pull
  request for 6.16-rc1.

  Overall, a lot of individual changes, but nothing major, just the
  normal constant forward progress of new device support and cleanups to
  existing subsystems. Highlights in here are:

   - Large IIO driver updates and additions and device tree changes

   - Android binder bugfixes and logfile fixes

   - mhi driver updates

   - comedi driver updates

   - counter driver updates and additions

   - coresight driver updates and additions

   - echo driver removal as there are no in-kernel users of it

   - nvmem driver updates

   - spmi driver updates

   - new amd-sbi driver "subsystem" and drivers added

   - rust miscdriver binding documentation fix

   - other small driver fixes and updates (uio, w1, acrn, hpet,
     xillybus, cardreader drivers, fastrpc and others)

  All of these have been in linux-next for quite a while with no
  reported problems"

* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
  binder: fix yet another UAF in binder_devices
  counter: microchip-tcb-capture: Add watch validation support
  dt-bindings: iio: adc: Add ROHM BD79100G
  iio: adc: add support for Nuvoton NCT7201
  dt-bindings: iio: adc: add NCT7201 ADCs
  iio: chemical: Add driver for SEN0322
  dt-bindings: trivial-devices: Document SEN0322
  iio: adc: ad7768-1: reorganize driver headers
  iio: bmp280: zero-init buffer
  iio: ssp_sensors: optimalize -> optimize
  HID: sensor-hub: Fix typo and improve documentation
  iio: admv1013: replace redundant ternary operator with just len
  iio: chemical: mhz19b: Fix error code in probe()
  iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
  iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
  iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
  iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
  iio: make IIO_DMA_MINALIGN minimum of 8 bytes
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - KEBA fan controller
   - KEBA battery monitoring controller
   - MAX77705

  Support added to existing drivers:
   - MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors)
   - SQ52206 support (ina238)
   - lt3074 support (pmbus/lt3074)
   - ADPM12160 support (pmbus/max34440)
   - MPM82504 and for MPM3695 family support (pmbus/mpq8785)
   - Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm)
   - Zen5 Ryzen Desktop support (k10temp)

  Various other minor fixes and improvements"

* tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
  doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature.
  hwmon: (isl28022) Fix current reading calculation
  hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data
  hwmon: Add KEBA fan controller support
  hwmon: pmbus: mpq8785: Add support for MPM3695 family
  hwmon: pmbus: mpq8785: Add support for MPM82504
  hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration
  hwmon: pmbus: mpq8785: Prepare driver for multiple device support
  dt-bindings: hwmon: Add bindings for mpq8785 driver
  hwmon: (ina238) Modify the calculation formula to adapt to different chips
  hwmon: (ina238) Add support for SQ52206
  dt-bindings: Add SQ52206 to ina2xx devicetree bindings
  hwmon: (ina238) Add ina238_config to save configurations for different chips
  hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO.
  hwmon: (isl28022, nct7363) Convert to use maple tree register cache
  hwmon: (asus-ec-sensors) check sensor index in read_string()
  hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula.
  dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support
  hwmon: (max77705) Add initial support
  hwmon: (tmp102) add vcc regulator support
  ...

This is done to support other functionality provided by the SBRMI, which
does not fit in the hwmon subsystem.

Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250428063034.2145566-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The KEBA fan controller is found in the system FPGA of KEBA PLC devices.
It detects if the fan is removed or blocked. For fans with tacho signal
the monitoring of the speed of the fan is supported. It also supports to
regulate the speed of fans with PWM input.

The auxiliary device for this driver is instantiated by the cp500 misc
driver.

Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20250425194823.54664-1-gerhard@engleder-embedded.com
[groeck: Added various missing "break;" statements]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The EC of OneXPlayer devices used to only control the fan. This is no
longer the case, with the EC of OneXPlayer gaining additional
functionality (turbo button, turbo led, battery controls).

As it will be beneficial from a complexity perspective to retain this
driver as a single unit, move it out of hwmon, and into platform/x86.
Also, remove the hwmon documentation to prepare moving it to
Documentation/ABI/.

While at it, add myself to the maintainer's file.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Maxim MAX77705 is a Companion Power Management and Type-C interface IC.
It includes charger and fuel gauge blocks, and is capable of measuring
charger input current, system bus volatage and current, and bypass
voltage.

Add support for mentioned measurements.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250423-initial-support-for-max77705-sensors-v6-1-ff379e1b06c5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The KEBA battery monitoring controller is found in the system FPGA of
KEBA PLC devices. It puts a load on the coin cell battery to check the
state of the battery. If the coin cell battery is nearly empty, then
the user space is signaled with a hwmon alarm.

The auxiliary device for this driver is instantiated by the cp500 misc
driver.

Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20250409190830.60489-1-gerhard@engleder-embedded.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add base support for HTU31 temperature and humidity sensor.

Besides temperature and humidity values, the driver also exports a 24-bit
heater control to sysfs and serial number to debugfs.

Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Link: https://lore.kernel.org/r/20250217051110.46827-2-andrey.lalaev@gmail.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for the Congatec Board Controller. This controller exposes
temperature, voltage, current and fan sensors.

The available sensors list cannot be predicted. Some sensors can be
present or not, depending the system.
The driver has an internal list of all possible sensors, for all Congatec
boards. The Board Controller gives to the driver its sensors list, and
their status (active or not).

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250203-congatec-board-controller-hwmon-v4-1-ff6c76a4662c@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>