Pull MFD updates from Lee Jones:
 "Core Framework:
   - Change MFD support status from Supported to Maintained

  New Drivers:
   - Add support for the Intel Platform Management Component Interface
     (PMCI)

  Removed Drivers:
   - HTC PASIC3 LED/DS1WM
   - Toshiba T7L66XB, TC6387XB and TC6393XB TMIO

  New Device Support:
   - Add support for N6000 Flash to Intel M10 BMC PMCI
   - Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC

  New Functionality:
   - Provide Reset support to Syscon

  Fix-ups:
   - Explicitly provide missing include files
   - Pass platform type data/info via the SPI/I2C/DT registration
     strategy
   - Lots of DT documentation / adaptions
   - Replace scnprintf() with preferred sysfs_emit()
   - Remove unused / superfluous code
   - Fix some trivial whitesspace / spelling / grammatical issues
   - Replace pm_power_off with new and improved
     register_sys_off_handler() API

  Bug Fixes:
   - Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
   - Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
   - Refuse to build CS5535 on unsupported UML architectures
   - Fix memory leaks in error return paths
   - Prevent refcount leaks in error return paths"

* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
  dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
  dt-bindings: mfd: Add NXP BBNSM
  mfd: ntxec: Add version number for EC in Tolino Vision
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  mfd: Remove toshiba tmio drivers
  mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
  mfd: syscon: Allow reset control for syscon devices
  dt-bindings: mfd/syscon: Add resets property
  dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
  mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
  mfd: axp20x: Switch to the sys-off handler API
  mfd: core: Spelling s/compement/complement/
  mfd: max8925: Remove the unused function irq_to_max8925()
  mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
  dt-bindings: mfd: syscon: Document GXP register compatible
  mfd: twl4030-power: Drop empty platform remove function
  mfd: twl: Fix TWL6032 phy vbus detection
  mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
  MAINTAINERS: Move MFD from a Supported to Maintaied state
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Infineon TDA38640 Voltage Regulator

   - NXP MC34VR500 PMIC

   - GXP fan controller

   - MPQ7932 Power Management IC

  New chip or board support added to existing drivers:

   - it87: IT87952E; also other cleanup/improvements

   - intel-m10-bmc-hwmon: N6000

   - pmbus/max16601: MAX16600

   - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer
     Poweradjust 3, Aquacomputer Aquaero

   - nct6775: Support for B650/B660/X670 ASUS boards

   - oxp-sensors: AYANEO AIR and AIR Pro

  Other notable changes:

   - Various kernel documentation fixes

   - Various devicetree bindings fixes

   - Explicitly deprecated [devm_]hwmon_device_register_with_groups

   - ftsteutates: Support for fanX_fault and other cleanup

   - ltc2945: Support for setting shunt resistor and other cleanup/fixes

   - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify
     platform device handling

  ... and various other minor cleanups and fixes"

* tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits)
  hwmon: Deprecate [devm_]hwmon_device_register_with_groups
  hwmon: (mlxreg-fan) Return zero speed for broken fan
  hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
  hwmon: (iio_hwmon) use dev_err_probe
  hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
  Docs/hwmon/index: Add missing SPDX License Identifier
  hwmon: (it87) Updated documentation for recent updates to it87
  hwmon: (it87) Add new chipset IT87952E
  hwmon: (it87) Allow multiple chip IDs for force_id
  hwmon: (it87) Add chip_id in some info message
  hwmon: (it87) List full chip model name
  hwmon: (it87) Disable configuration exit for certain chips
  hwmon: (it87) Allow disabling exiting of configuration mode
  Documentation: hwmon: correct spelling
  hwmon: (pmbus/max16601) Add support for MAX16600
  hwmon: (ltc2945) Allow setting shunt resistor
  hwmon: (ltc2945) Handle error case in ltc2945_value_store
  hwmon: (ltc2945) Add devicetree match table
  ...

Add initial monitoring support for the MC34VR500 PMIC. In its current
state, input voltage and temperature alarms are reported to hwmon.

Datasheet:
 - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf

Signed-off-by: Mario Kicherer <dev@kicherer.org>
Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org
[groeck: Silence stray compiler warning, terminate struct of_device_id]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring
GUID  and entrypoint method WMBD could be implemented for different device
UID.

Implement the direct call to entrypoint method for monitoring the device
UID of B550/X570 boards.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230111212241.7456-1-pauk.denis@gmail.com
[groeck: Fix multi-line formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The GXP SoC can support up to 16 fans through the interface provided by
the CPLD. The current support is limited to 8 fans. The fans speeds are
controlled via 8 different PWMs which can vary in value from  0-255. The
fans are also capable of reporting if they have failed to the CPLD which
in turn reports the status to the GXP SoC.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com
[groeck: Improved alignment of defined, added missing include linux/bits.h]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
and move the SPI bus parts into an interface specific file.

intel-m10-bmc-core becomes the core MFD functions which can support
multiple bus interface like SPI bus.

Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> # hwmon
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-5-ilpo.jarvinen@linux.intel.com

The s3c adc driver was removed along with the s3c24xx platform, so the
hwmon driver is orphaned and can be removed.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Sensors driver for OXP Handhelds from One-Netbook that expose fan reading
and control via hwmon sysfs.

As far as I could gather all OXP boards have the same DMI strings and
they can be told appart only by the boot cpu vendor (Intel/AMD).
Currently only AMD boards are supported since Intel have different EC
registers and values to read/write.

Fan control is provided via pwm interface in the range [0-255]. AMD
boards have [0-100] as range in the EC, the written value is scaled to
accommodate for that.

Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com
[groeck: Removed misleading comment about module_platform_driver()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This commit adds support for Ampere SMpro hwmon driver. This driver
supports accessing various CPU sensors provided by the SMpro co-processor
including temperature, power, voltages, and current.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>