Ported from kernel 3.0.15.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>

Merge mag3110 drivers from sensor team.
The drivers are updated with chip position configure
in driver, export set delay interface to userspace and
use polling mode instead of interrupt mode.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>

based on the 2.6.38 kernel mainline, refer to linux lm-sensors
architeture, add the standalone ahci temperature monitor driver
on fsl i.mx53 platforms.
Less than half sencond is used in one temperature read operation.

usage:
Use the following cmd to cat the i.mx53 soc temperature after
boot up i.mx53 system in user space.
for example:
...$ cat /sys/class/hwmon/hwmon1/device/temp1_input
61000
or run the following cmd after configure the lm-sensors
...$ sensors
imx-ahci-hwmon-isa-0000
Adapter: ISA adapter
temp1:        +58.0 C

Signed-off-by: Richard Zhu <r65037@freescale.com>

- Ported MAX17135 MFD core driver to 2.6.38
- Ported MAX17135 HWMON temperature sensor driver to 2.6.38
- Ported MAX17135 regulator driver to 2.6.38

Signed-off-by: Danny Nold <dannynold@freescale.com>

Fix da9053 backlight Kconfig error
porting da9052 regulator driver

Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
Acked-by: Lily Zhang <r58066@freescale.com>

Add mma8450 accelerometer driver.

Signed-off-by: Sammy He <r62914@freescale.com>

Add mma8451 accelerometer driver.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
Signed-off-by: Sammy He <r62914@freescale.com>

This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Harry G McGavran Jr <w5pny@arrl.net>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

As discussed earlier, the ACPI power meter driver would better live
in drivers/hwmon, as its only purpose is to create hwmon-style
interfaces for ACPI 4.0 power meter devices. Users are more likely to
look for it there, and less likely to accidentally hide it by
unselecting its dependencies.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: "Darrick J. Wong" <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Len Brown <lenb@kernel.org>

This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>