linux-toradex.git/drivers/hwmon/Makefile, branch v3.1

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging

2011-07-30T18:57:57+00:00

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...

hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus

2011-07-28T18:47:53+00:00

Since the number of PMBus drivers is getting large, move them into
directory drivers/hwmon/pmbus to improve readability and scalability.

Signed-off-by: Guenter Roeck 
Reviewed-by: Robert Coulson

hwmon: LM95245 driver

2011-07-28T07:17:35+00:00

A hwmon driver for the National Semiconductor LM95245 dual temperature
sensors chip.

Signed-off-by: Alexander Stein 
Signed-off-by: Guenter Roeck

hwmon: Driver for NTC Thermistors

2011-07-28T07:17:33+00:00

Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.

Signed-off-by: Donggeun Kim 
Signed-off-by: MyungJoo Ham 
Signed-off-by: KyungMin Park 
Reviewed-by: Shubhrajyoti D 
Signed-off-by: Guenter Roeck

hwmon: Driver for MAX1668

2011-07-28T07:17:32+00:00

This patch adds support for MAX1668 and compatible temperature sensors.

Signed-off-by: David George 
[guenter.roeck@ericsson.com: minor cleanup of probe error path]
Signed-off-by: Guenter Roeck

hwmon: New driver sch5636

2011-07-25T19:46:09+00:00

This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own
custom hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636
based hwmon solution. The sch5636 driver runs a sanity check on
loading to ensure it is dealing with a Fujitsu Theseus and not with
another custom SCH5636 based hwmon solution.

Signed-off-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (sch5627) Factor out some code shared with sch5636 driver

2011-07-25T19:46:09+00:00

This patch adds a new sch56xx-common.ko which contains code which will also
be used in the new sch5636 driver.

Signed-off-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: New driver for the SMSC EMC6W201

2011-05-25T18:43:33+00:00

This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.

Signed-off-by: Jean Delvare 
Tested-by: Harry G McGavran Jr 
Tested-by: Jeff Rickman 
Acked-by: Guenter Roeck

Move ACPI power meter driver to hwmon

2011-05-25T18:43:32+00:00

As discussed earlier, the ACPI power meter driver would better live
in drivers/hwmon, as its only purpose is to create hwmon-style
interfaces for ACPI 4.0 power meter devices. Users are more likely to
look for it there, and less likely to accidentally hide it by
unselecting its dependencies.

Signed-off-by: Jean Delvare 
Acked-by: "Darrick J. Wong" 
Acked-by: Guenter Roeck 
Cc: Len Brown

hwmon: Add driver for AMD family 15h processor power information

2011-05-25T18:43:31+00:00

This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann 
Signed-off-by: Jean Delvare