linux-toradex.git/drivers/hwmon/abituguru3.c, branch tegra-10.8.3

hwmon: Include instead of

2009-09-15T15:18:13+00:00

Drivers should be including  instead of .

Signed-off-by: H Hartley Sweeten 
Cc: Alistair John Strachan 
Cc: Nicolas Boichat 
Cc: Juerg Haefliger 
Cc: Frank Seidel 
Acked-by: Jim Cromie 
Cc: "Mark M. Hoffman" 
Cc: Roger Lucas 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Support multiple DMI strings per chip ID

2009-09-15T15:18:10+00:00

Most known Abit motherboards have unique uguru chip IDs. However,
some "refresh" boards keep the same chip ID but have a different
DMI string. As our DMI board string matching is (necessarily)
strict, some boards were failing DMI detection, and as the old
probe method was also failing, the driver would not load.

The only known boards affected by this problem are the IP35 Pro XE
(vs IP35 Pro) and the AB9 Pro (vs AB9). Is it not sufficient to
relax the match criteria, as some boards (e.g. the AB9 Quad GT)
have different uguru chip IDs.

This patch replaces the dmi_name string with a NULL terminated
array of strings to be matched per uguru chip ID. It has been
compile and runtime tested (thanks Rune).

References: https://bugs.launchpad.net/bugs/298798

Signed-off-by: Alistair John Strachan 
Tested-by: Rune Svendsen 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT

2009-07-11T11:42:38+00:00

Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.

Signed-off-by: Alistair John Strachan 
Tested-by: dan 
Tested-by: Nygel Lyndley 
Tested-by: Dmitriy Fedchenko 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Fix I/O error handling

2009-03-12T12:36:38+00:00

Fix a logic bug reported by Roel Kluin, by rewriting the error
handling code in a clearer way.

Signed-off-by: Jean Delvare 
Cc: Roel Kluin 
Acked-by: Alistair John Strachan 
Acked-by: Hans de Goede

hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe

2009-01-15T21:27:48+00:00

When CONFIG_DMI is not enabled, dmi detection should flag that no board
could be detected (err=1) rather than another error condition (err<0).

This fixes the fallback to manual probing for all motherboards, even
those without DMI strings, when CONFIG_DMI=n.

Signed-off-by: Alistair John Strachan 
Cc: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX

2009-01-15T21:27:48+00:00

Switch the IN9 32X MAX over from port probing to the preferred DMI
probe method.

Signed-off-by: Alistair John Strachan 
Tested-by: Paul Hartman 
Cc: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Match partial DMI board name strings

2009-01-15T21:27:47+00:00

The switch-over to using DMI board strings to identify abituguru3 compatible
mainboards works most of the time, but sometimes the vendor has substantially
modified the board string between BIOS revisions.

We have found that the vendor chipset identification string (provided in
brackets) changes frequently and is of no use to us. The rest of the board
string sometimes changes in subtle ways, e.g. whitespace or variations in
capitalization.

The new comparison code checks only a part of the supplied DMI board string,
trimming the bracketed content, whitespace, and ignoring case as necessary.

This fixes a bug where an IP35 Pro running an early BIOS would not be
detected without the force=1 module parameter, and also speculatively
fixes other similiar issues.

Signed-off-by: Alistair John Strachan 
Reported-by: Nick Pasich 
Cc: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX

2008-10-26T16:04:40+00:00

Switch the AW9D-MAX over from port probing to the preferred DMI
probe method.

Signed-off-by: Alistair John Strachan 
Tested-by: Justin Piszcz 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Cosmetic whitespace fixes

2008-10-26T16:04:40+00:00

As the probable result of zealous copy/pasting, many supported boards
contain sensor names with trailing whitespace. Though this is not a
huge problem, it is inconsistent with other sensor names, and with
other similar hwmon drivers.

Additionally, the DMI nag message added in 2.6.27 was missing a
space between two sentence fragments -- might as well clean that up
too.

Doesn't alter any kernel text, just data.

Signed-off-by: Alistair John Strachan 
Reported-by: Justin Piszcz 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

2008-10-09T13:33:59+00:00

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan 
Tested-by: Daniel Exner 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare