linux-toradex.git/drivers/hwmon/abituguru3.c, branch v3.2.31

hwmon: (abituguru) Depend on DMI

2011-05-25T18:43:33+00:00

The abituguru drivers are only built on X86, where DMI support is now
enabled by default. So let these drivers depend on DMI, for the
following gains:
* Robustness and safety. Detection of these devices is weak and uses
  non-standard methods, it should really be limited to Abit boards
  unless the user explicitly asks otherwise.
* Code simplicity. The code is easier to read without ifdefs.
* Better build testing coverage. Now there's only one way to build the
  drivers, so no risk of build failure on exotic systems.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck 
Acked-by: Alistair John Strachan 
Acked-by: Hans de Goede

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

hwmon: (abituguru*) Update my email address

2011-03-21T16:59:36+00:00

Signed-off-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Use pr_fmt and pr_

2011-01-08T18:55:01+00:00

Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_
Coalesced any long formats
Removed prefixes from formats
Added a few static strings to standardize logging messages.

Signed-off-by: Joe Perches 
Signed-off-by: Guenter Roeck

hwmon: Include instead of

2009-09-15T15:18:13+00:00

Drivers should be including  instead of .

Signed-off-by: H Hartley Sweeten 
Cc: Alistair John Strachan 
Cc: Nicolas Boichat 
Cc: Juerg Haefliger 
Cc: Frank Seidel 
Acked-by: Jim Cromie 
Cc: "Mark M. Hoffman" 
Cc: Roger Lucas 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Support multiple DMI strings per chip ID

2009-09-15T15:18:10+00:00

Most known Abit motherboards have unique uguru chip IDs. However,
some "refresh" boards keep the same chip ID but have a different
DMI string. As our DMI board string matching is (necessarily)
strict, some boards were failing DMI detection, and as the old
probe method was also failing, the driver would not load.

The only known boards affected by this problem are the IP35 Pro XE
(vs IP35 Pro) and the AB9 Pro (vs AB9). Is it not sufficient to
relax the match criteria, as some boards (e.g. the AB9 Quad GT)
have different uguru chip IDs.

This patch replaces the dmi_name string with a NULL terminated
array of strings to be matched per uguru chip ID. It has been
compile and runtime tested (thanks Rune).

References: https://bugs.launchpad.net/bugs/298798

Signed-off-by: Alistair John Strachan 
Tested-by: Rune Svendsen 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT

2009-07-11T11:42:38+00:00

Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.

Signed-off-by: Alistair John Strachan 
Tested-by: dan 
Tested-by: Nygel Lyndley 
Tested-by: Dmitriy Fedchenko 
Acked-by: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Fix I/O error handling

2009-03-12T12:36:38+00:00

Fix a logic bug reported by Roel Kluin, by rewriting the error
handling code in a clearer way.

Signed-off-by: Jean Delvare 
Cc: Roel Kluin 
Acked-by: Alistair John Strachan 
Acked-by: Hans de Goede

hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe

2009-01-15T21:27:48+00:00

When CONFIG_DMI is not enabled, dmi detection should flag that no board
could be detected (err=1) rather than another error condition (err<0).

This fixes the fallback to manual probing for all motherboards, even
those without DMI strings, when CONFIG_DMI=n.

Signed-off-by: Alistair John Strachan 
Cc: Hans de Goede 
Signed-off-by: Jean Delvare

hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX

2009-01-15T21:27:48+00:00

Switch the IN9 32X MAX over from port probing to the preferred DMI
probe method.

Signed-off-by: Alistair John Strachan 
Tested-by: Paul Hartman 
Cc: Hans de Goede 
Signed-off-by: Jean Delvare