linux-toradex.git/drivers/hwmon/ftsteutates.c, branch v6.3-rc3

hwmon: (ftsteutates) Add support for fanX_fault attributes

2023-02-03T15:30:10+00:00

The driver knows internally when a fan is not connected,
but does not export this knowledge to userspace. Use the
standard fanX_fault attributes to notify userspace if a
fan is not connected.

Tested on a Fujitsu DS3401-B1.

Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20230105225107.58308-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck

hwmon: (ftsteutates) Replace fanX_source with pwmX_auto_channels_temp

2023-02-03T15:30:10+00:00

Replace the nonstandard fanX_source attributes with the standardized
pwmX_auto_channels_temp attributes and document the special behaviour
associated with those attributes.

Tested on a Fujitsu DS3401-B1.

Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20230105225107.58308-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck

hwmon: (ftsteutates) Convert to devm_hwmon_device_register_with_info()

2023-02-03T15:30:10+00:00

Convert driver to use devm_hwmon_device_register_with_info()
to reduce module size by ~30%.

Tested on a Fujitsu DS3401-B1.

Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20230105225107.58308-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck

hwmon: (ftsteutates) Use devm_watchdog_register_device()

2023-02-03T15:30:09+00:00

Use devm_watchdog_register_device() to let devres take care
of unregistering the watchdog at device removal. Remove the
now pointless fts_remove() function.

Tested on a Fujitsu DS3401-B1.

Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20221224041855.83981-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck

hwmon: (ftsteutates) Fix scaling of measurements

2023-01-03T21:26:45+00:00

A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V

The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).

The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.

The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.

Tested on a Fujitsu DS3401-B1.

Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck

Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2022-10-05T02:02:54+00:00

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for MAX31760 fan speed controller

   - Driver for TEXAS TPS546D24 Buck Converter

   - Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller

  Removed drivers:

   - Drop obsolete asus_wmi_ec_sensors driver

  Cleanups, affecting various drivers:

   - Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate

   - Remove forward declarations

   - Move from strlcpy with unused retval to strscpy

   - Make use of devm_clk_get_enabled()

   - Drop devm_of_pwm_get()

  Other notable cleanup and improvements:

   - Support for additional USB devide ID and support for reporting of
     rail mode via debugfs added to corsair-psu driver

   - Support for aditional USB ID in nzxt-smart2 driver

   - Support for Aquacomputer High Flow Next in aquacomputer_d5next
     driver

   - Major cleanup of pwm-fan driver

   - Major cleanup of mr75203 driver, and added support for new device
     revision

  And various other minor fixes and cleanups"

* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
  hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
  hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
  dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
  hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
  hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
  hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

hwmon: move from strlcpy with unused retval to strscpy

2022-09-19T13:17:05+00:00

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang 
Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin 
Reviewed-by: Jeremy Kerr 
Reviewed-by: Benjamin Mugnier 
Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Crt Mori 
Reviewed-by: Heikki Krogerus 
Acked-by: Greg Kroah-Hartman 
Acked-by: Marek Behún  # for leds-turris-omnia
Acked-by: Andy Shevchenko 
Reviewed-by: Petr Machata  # for mlxsw
Reviewed-by: Maximilian Luz  # for surface3_power
Acked-by: Srinivas Pandruvada  # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil  # for media/* + staging/media/*
Acked-by: Miguel Ojeda  # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli  # for versaclock5
Reviewed-by: Ajay Gupta  # for ucsi_ccg
Acked-by: Jonathan Cameron  # for iio
Acked-by: Peter Rosin  # for i2c-mux-*, max9860
Acked-by: Adrien Grassein  # for lontium-lt8912b
Reviewed-by: Jean Delvare  # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard  # for IPMI
Reviewed-by: Vladimir Oltean 
Acked-by: Dmitry Torokhov 
Acked-by: Sebastian Reichel  # for drivers/power
Acked-by: Krzysztof Hałasa 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Wolfram Sang

hwmon: (ftsteutates) Rudimentary typo fixes

2021-04-20T13:50:14+00:00

s/Temprature/Temperature/
s/revsion/revision/

Signed-off-by: Bhaskar Chowdhury 
Acked-by: Randy Dunlap 
Link: https://lore.kernel.org/r/20210323043438.1321903-1-unixbhaskar@gmail.com
Signed-off-by: Guenter Roeck

hwmon: (ftsteutates) Fix spelling typo

2021-04-20T13:50:14+00:00

Change 'revsion' to 'revision'.

Signed-off-by: zuoqilin 
Link: https://lore.kernel.org/r/20210318124637.1331-1-zuoqilin1@163.com
Signed-off-by: Guenter Roeck