linux-toradex.git/drivers/hwmon/lm78.c, branch v3.2.20

hwmon: (lm78) Become the maintainer

2011-07-25T19:46:11+00:00

Declare myself the maintainer of the lm78 driver. I still have a
running system with one of these chips.

Also count myself as a co-author of the driver. With 34 commits over
6 years, it seems fair.

Signed-off-by: Jean Delvare

hwmon: (lm78) Make ISA interface depend on CONFIG_ISA

2011-07-25T19:46:11+00:00

We should only include support for the ISA interface of the LM78/LM79
if CONFIG_ISA is set. Not only this makes the driver somewhat smaller
on most architectures, but this also avoids poking at random I/O
ports on these architectures.

This is very similiar to what was done for the w83781d driver in
October 2008.

Signed-off-by: Jean Delvare 
Cc: Dean Nelson

hwmon: (lm78) Avoid forward declarations

2011-07-25T19:46:11+00:00

Move code around to avoid several forward declarations. Also group
ISA-related functions together, to make future changes easier.

Signed-off-by: Jean Delvare 
Cc: Dean Nelson

hwmon: (lm78) Use pr_fmt and pr_

2011-01-12T20:55:10+00:00

Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches 
Signed-off-by: Jean Delvare

hwmon: (lm78) Request I/O ports individually for probing

2010-02-05T18:58:36+00:00

Different motherboards have different PNP declarations for LM78/LM79
chips. Some declare the whole range of I/O ports (8 ports), some
declare only the useful ports (2 ports at offset 5) and some declare
fancy ranges, for example 4 ports at offset 4. To properly handle all
cases, request all ports individually for probing. After we have
determined that we really have an LM78 or LM79 chip, the useful port
range will be requested again, as a single block.

This fixes the driver on the Olivetti M3000 DT 540, at least.

Signed-off-by: Jean Delvare 
Cc: stable@kernel.org

i2c: Drop I2C_CLIENT_INSMOD_2 to 8

2009-12-14T20:17:27+00:00

These macros simply declare an enum, so drivers might as well declare
it themselves. This puts an end to the arbitrary limit of 8 chip types
per i2c driver.

Signed-off-by: Jean Delvare 
Tested-by: Wolfram Sang

i2c: Get rid of struct i2c_client_address_data

2009-12-14T20:17:25+00:00

Struct i2c_client_address_data only contains one field at this point,
which makes its usefulness questionable. Get rid of it and pass simple
address lists around instead.

Signed-off-by: Jean Delvare 
Tested-by: Wolfram Sang

i2c: Drop the kind parameter from detect callbacks

2009-12-14T20:17:23+00:00

The "kind" parameter always has value -1, and nobody is using it any
longer, so we can remove it.

Signed-off-by: Jean Delvare 
Tested-by: Wolfram Sang

hwmon: Clean up detect functions

2009-12-09T19:35:57+00:00

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare 
Acked-by: Corentin Labbe 
Cc: "Mark M. Hoffman" 
Cc: Juerg Haefliger 
Cc: Riku Voipio 
Acked-by: "Hans J. Koch" 
Cc: Rudolf Marek

hwmon: Include instead of

2009-09-15T15:18:13+00:00

Drivers should be including  instead of .

Signed-off-by: H Hartley Sweeten 
Cc: Alistair John Strachan 
Cc: Nicolas Boichat 
Cc: Juerg Haefliger 
Cc: Frank Seidel 
Acked-by: Jim Cromie 
Cc: "Mark M. Hoffman" 
Cc: Roger Lucas 
Signed-off-by: Jean Delvare