linux-toradex.git/drivers/hwmon/ltc2945.c, branch v6.0-rc3

hwmon: replace snprintf in show functions with sysfs_emit

2021-04-20T13:50:14+00:00

coccicheck complains about the use of snprintf() in sysfs
show functions.

drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf

This results in a large number of patch submissions. Fix it all in
one go using the following coccinelle rules. Use sysfs_emit instead
of scnprintf or sprintf since that makes more sense.

@depends on patch@
identifier show, dev, attr, buf;
@@

ssize_t show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
  return
-		snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \),
+		sysfs_emit(buf,
		...);
	...>
}

@depends on patch@
identifier show, dev, attr, buf, rc;
@@

ssize_t show(struct device *dev, struct device_attribute *attr, char *buf)
{
	<...
  rc =
-		snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \),
+		sysfs_emit(buf,
		...);
	...>
}

While at it, remove unnecessary braces and as well as unnecessary
else after return statements to address checkpatch warnings in the
resulting patch.

Cc: Zihao Tang 
Cc: Jay Fang 
Signed-off-by: Guenter Roeck

hwmon: use simple i2c probe function

2020-09-23T16:42:39+00:00

Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.

Signed-off-by: Stephen Kitt 
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37+00:00

Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman

hwmon: (ltc2945): Auto-convert to use SENSOR_DEVICE_ATTR_{RO, RW, WO}

2018-12-16T23:13:23+00:00

Conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci

Signed-off-by: Guenter Roeck

hwmon: Make regmap configs const

2014-08-04T14:01:35+00:00

Signed-off-by: Axel Lin 
Signed-off-by: Guenter Roeck

hwmon: (ltc2945) Fix 1st comment line

2014-05-21T23:02:22+00:00

Somehow a couple of spaces got added to the first line. Remove them.
No code change.

Signed-off-by: Guenter Roeck

hwmon: (ltc2945) Don't crash the kernel unnecessarily

2014-04-24T13:09:43+00:00

An implementation error should not crash the kernel if it is avoidable.
Replace BUG() with WARN_ONCE().

Signed-off-by: Guenter Roeck

hwmon: Driver for Linear Technologies LTC2945

2014-03-03T16:01:03+00:00

LTC2945 is a system monitor that measures current, voltage, and power.

Signed-off-by: Guenter Roeck