linux-toradex.git/drivers/hwmon/ltc4245.c, branch v3.14.42

hwmon: (ltc4245) Convert to use hwmon_device_register_with_groups

2013-10-13T23:16:27+00:00

Signed-off-by: Guenter Roeck

hwmon: (ltc4245) Fix 'Macros with complex values' checkpatch error

2013-04-08T04:16:40+00:00

Fix:
ERROR: Macros with complex values should be enclosed in parenthesis

by unwinding the problematic macros.

Signed-off-by: Guenter Roeck

hwmon: Add missing inclusions of

2012-10-10T13:25:56+00:00

Many hwmon drivers use jiffies but omit the inclusion of the header
file. Fix that, and also fix one driver which was including the header
file but didn't need it.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck 
Acked-by: Luca Tettamanti 
Cc: Marc Hulsman 
Cc: Rudolf Marek

hwmon: (ltc4245) Convert to use devm_ functions

2012-09-24T04:08:32+00:00

Convert to use devm_ functions to reduce code size and simplify the code.

Cc: Ira W. Snyder 
Signed-off-by: Guenter Roeck

hwmon: (ltc4245) Fix multi-line comments

2012-03-19T01:27:01+00:00

Cc: Ira W. Snyder 
Signed-off-by: Guenter Roeck 
Acked-by: Ira W. Snyder

hwmon: convert drivers/hwmon/* to use module_i2c_driver()

2012-03-19T01:26:50+00:00

This patch converts the drivers in drivers/hwmon/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin 
Cc: Corentin Labbe 
Cc: Dirk Eibach 
Cc: "Mark M. Hoffman" 
Cc: Steve Glendinning 
Cc: Riku Voipio 
Cc: Guillaume Ligneul 
Cc: David George 
Cc: "Hans J. Koch" 
Cc: Marc Hulsman 
Cc: Rudolf Marek 
Signed-off-by: Guenter Roeck

hwmon: (ltc4245) Expose all GPIO pins as analog voltages

2010-08-14T19:08:49+00:00

Add support for exposing all GPIO pins as analog voltages. Though this is
not an ideal use of the chip, some hardware engineers may decide that the
LTC4245 meets their design requirements when studying the datasheet.

The GPIO pins are sampled in round-robin fashion, meaning that a slow
reader will see stale data. A userspace application can detect this,
because it will get -EAGAIN when reading from a sysfs file which contains
stale data.

Users can choose to use this feature on a per-chip basis by using either
platform data or the OF device tree (where applicable).

Signed-off-by: Ira W. Snyder 
Signed-off-by: Jean Delvare

hwmon: (ltc4245) Read only one GPIO pin

2010-05-27T17:59:02+00:00

Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.

Signed-off-by: Ira W. Snyder 
Signed-off-by: Jean Delvare 
Cc: stable@kernel.org

ltc4215/ltc4245: Discard obsolete detect methods

2009-10-04T20:53:42+00:00

There is no point in implementing a detect callback for the LTC4215
and LTC4245, as these devices can't be detected. It was there solely
to handle "force" module parameters to instantiate devices, but now
we have a better sysfs interface that can do the same.

So we can get rid of the ugly module parameters and the detect
callbacks. This shrinks the binary module sizes by 36% and 46%,
respectively.

Signed-off-by: Jean Delvare 
Cc: Ira W. Snyder

hwmon: (ltc4245) Clear faults at startup

2009-09-23T20:59:44+00:00

When power is applied to the ltc4245 chip it sometimes reports spurious
faults, which are exposed as alarms in the hwmon output. Clear the fault
register when the driver is installed to clear the alarms.

Signed-off-by: Ira W. Snyder 
Signed-off-by: Jean Delvare