linux-toradex.git/drivers/hwmon/pc87360.c, branch v3.0.86

hwmon: (pc87360) Use pr_fmt and pr_

2011-01-12T20:55:11+00:00

Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_
Coalesced any long formats
Removed prefixes from formats

[JD: Also convert debug messages]

Signed-off-by: Joe Perches 
Signed-off-by: Jean Delvare

hwmon: (pc87360) Fix device resource declaration

2010-08-14T19:08:48+00:00

It's not OK to call platform_device_add_resources() multiple times
in a row. Despite its name, this functions sets the resources, it
doesn't add them. So we have to prepare an array with all the
resources, and then call platform_device_add_resources() once.

Before this fix, only the last I/O resource would be actually
registered. The other I/O resources were leaked.

Signed-off-by: Jean Delvare 
Cc: Jim Cromie 
Cc: stable@kernel.org

hwmon: Include instead of

2009-09-15T15:18:13+00:00

Drivers should be including  instead of .

Signed-off-by: H Hartley Sweeten 
Cc: Alistair John Strachan 
Cc: Nicolas Boichat 
Cc: Juerg Haefliger 
Cc: Frank Seidel 
Acked-by: Jim Cromie 
Cc: "Mark M. Hoffman" 
Cc: Roger Lucas 
Signed-off-by: Jean Delvare

hwmon: Check for ACPI resource conflicts

2009-01-07T15:37:35+00:00

Check for ACPI resource conflicts in hwmon drivers. I've included
all Super-I/O and PCI drivers.

I've voluntarily left out:
* Vendor-specific drivers: if they conflicted on any system, this would
  pretty much mean that they conflict on all systems, and we would know
  by now.
* Legacy ISA drivers (lm78 and w83781d): they only support chips found
  on old designs were ACPI either wasn't supported or didn't deal with
  thermal management.
* Drivers accessing the I/O resources indirectly (e.g. through SMBus):
  the checks are already done where they belong, i.e. in the bus drivers.

Signed-off-by: Jean Delvare 
Acked-by: David Hubbard

hwmon/pc87360 separate alarm files: add therm-min/max/crit-alarms

2008-10-20T15:52:35+00:00

Adds therm-min/max/crit-alarm callbacks, sensor-device-attribute
declarations, and refs to those new decls in the macro used to initialize
the therm_group (of sysfs files)

The thermistors use voltage channels to measure; so they don't have a
fault-alarm, but unlike the other voltages, they do have an overtemp,
which we call crit (by convention).

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon/pc87360 separate alarm files: add dev_dbg help

2008-10-20T15:52:35+00:00

temp and vin status register values may be set by chip specifications, set
again by bios, or by this previously loaded driver.  Debug output nicely
displays modprobe init=\d actions.

Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon/pc87360 separate alarm files: define LDNI_MAX const

2008-10-20T15:52:35+00:00

Driver handles 3 logical devices in fixed length array.  Give this a
define-d constant.

Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon/pc87360 separate alarm files: add temp-min/max/crit/fault-alarms

2008-10-20T15:52:35+00:00

Adds temp-min/max/crit/fault-alarm callbacks, sensor-device-attribute
declarations, and refs to those new decls in the macro used to initialize
the temp_group (of sysfs files)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon/pc87360 separate alarm files: add in-min/max-alarms

2008-10-20T15:52:35+00:00

Adds vin-min/max-alarm callbacks, sensor-device-attribute declarations,
and refs to those new decls in the macro used to initialize the vin_group
(of sysfs files)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon/pc87360 separate alarm files: define some constants

2008-10-20T15:52:35+00:00

Bring hwmon/pc87360 into agreement with
Documentation/hwmon/sysfs-interface.

Patchset adds separate limit alarms for voltages and temps, it also adds
temp[123]_fault files.  On my Soekris, temps 1,2 are unused/unconnected,
so temp[123]_fault = 1,1,0 respectively.  This agrees with
/usr/bin/sensors, which has always shown them as OPEN.  Temps 4,5,6 are
thermistor based, and dont have a fault bit in their status register.

This patch:

2 different kinds of constants added:
- CHAN_ALM_* constants for (later) vin, temp alarm callbacks.
- CHAN_* conversion constants, used in _init_device, partly for RW1C bits

Signed-off-by: Jim Cromie 
Cc: Jean Delvare 
Cc: "Mark M. Hoffman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds