Pull KVM/arm64 updates from Will Deacon:
 "New features:

   - Support for non-protected guest in protected mode, achieving near
     feature parity with the non-protected mode

   - Support for the EL2 timers as part of the ongoing NV support

   - Allow control of hardware tracing for nVHE/hVHE

  Improvements, fixes and cleanups:

   - Massive cleanup of the debug infrastructure, making it a bit less
     awkward and definitely easier to maintain. This should pave the way
     for further optimisations

   - Complete rewrite of pKVM's fixed-feature infrastructure, aligning
     it with the rest of KVM and making the code easier to follow

   - Large simplification of pKVM's memory protection infrastructure

   - Better handling of RES0/RES1 fields for memory-backed system
     registers

   - Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
     from a pretty nasty timer bug

   - Small collection of cleanups and low-impact fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
  arm64/sysreg: Get rid of TRFCR_ELx SysregFields
  KVM: arm64: nv: Fix doc header layout for timers
  KVM: arm64: nv: Apply RESx settings to sysreg reset values
  KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
  KVM: arm64: Fix selftests after sysreg field name update
  coresight: Pass guest TRFCR value to KVM
  KVM: arm64: Support trace filtering for guests
  KVM: arm64: coresight: Give TRBE enabled state to KVM
  coresight: trbe: Remove redundant disable call
  arm64/sysreg/tools: Move TRFCR definitions to sysreg
  tools: arm64: Update sysreg.h header files
  KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
  KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
  KVM: arm64: Drop pkvm_mem_transition for FF-A
  KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
  KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
  arm64: kvm: Introduce nvhe stack size constants
  KVM: arm64: Fix nVHE stacktrace VA bits mask
  KVM: arm64: Fix FEAT_MTE in pKVM
  Documentation: Update the behaviour of "kvm-arm.mode"
  ...

There is no such thing as TRFCR_ELx in the architecture.
What we have is TRFCR_EL1, for which TRFCR_EL12 is an accessor.

Rename TRFCR_ELx_* to TRFCR_EL1_*, and fix the bit of code using
these names.

Similarly, TRFCR_EL12 is redefined as a mapping to TRFCR_EL1.

Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87cygsqgkh.wl-maz@kernel.org
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>

Correct the function parameters based on a previous code patch to
eliminate kernel-doc warnings.

drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'drvdata' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Function parameter or struct member 'ndevres' not described in 'intel_th_alloc'
drivers/hwtracing/intel_th/core.c:866: warning: Excess function parameter 'irq' description in 'intel_th_alloc'

Fixes: 62a593022c32 ("intel_th: Communicate IRQ via resource")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250111062851.910530-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the userspace and kernel filters for guests are never set, so
no trace will be generated for them. Add support for tracing guests by
passing the desired TRFCR value to KVM so it can be applied to the
guest.

By writing either E1TRE or E0TRE, filtering on either guest kernel or
guest userspace is also supported. And if both E1TRE and E0TRE are
cleared when exclude_guest is set, that option is supported too. This
change also brings exclude_host support which is difficult to add as a
separate commit without excess churn and resulting in no trace at all.

cpu_prohibit_trace() gets moved to TRBE because the ETM driver doesn't
need the read, it already has the base TRFCR value. TRBE only needs
the read to disable it and then restore.

Testing
=======

The addresses were counted with the following:

  $ perf report -D | grep -Eo 'EL2|EL1|EL0' | sort | uniq -c

Guest kernel only:

  $ perf record -e cs_etm//Gk -a -- true
    535 EL1
      1 EL2

Guest user only (only 5 addresses because the guest runs slowly in the
model):

  $ perf record -e cs_etm//Gu -a -- true
    5 EL0

Host kernel only:

  $  perf record -e cs_etm//Hk -a -- true
   3501 EL2

Host userspace only:

  $  perf record -e cs_etm//Hu -a -- true
    408 EL0
      1 EL2

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20250106142446.628923-8-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Currently in nVHE, KVM has to check if TRBE is enabled on every guest
switch even if it was never used. Because it's a debug feature and is
more likely to not be used than used, give KVM the TRBE buffer status to
allow a much simpler and faster do-nothing path in the hyp.

Protected mode now disables trace regardless of TRBE (because
trfcr_while_in_guest is always 0), which was not previously done.
However, it continues to flush whenever the buffer is enabled
regardless of the filter status. This avoids the hypothetical case of a
host that had disabled the filter but not flushed which would arise if
only doing the flush when the filter was enabled.

Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-6-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

trbe_drain_and_disable_local() just clears TRBLIMITR and drains.
TRBLIMITR is already cleared on the next line after this call, so
replace it with only drain. This is so we can make a kvm call that has a
preempt enabled warning from set_trbe_disabled() in the next commit,
where trbe_reset_local() is called from a preemptible hotplug path.

Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-5-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Since the new funnel device supports multi-port output scenarios,
there may be more than one TPDM connected to one TPDA. In this
way, when reading the element size of the TPDM, TPDA driver needs
to find the expected TPDM corresponding to the filter source.
When TPDA finds a TPDM or a filter source from a input connection,
it will read the Devicetree to get the expected TPDM's element
size.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-5-quic_taozha@quicinc.com

Some replicators have hard coded filtering of "trace" data, based on the
source device. This is different from the trace filtering based on
TraceID, available in the standard programmable replicators. e.g.,
Qualcomm replicators have filtering based on custom trace protocol
format and is not programmable.

The source device could be connected to the replicator via intermediate
components (e.g., a funnel). Thus we need platform information from
the firmware tables to decide the source device corresponding to a
given output port from the replicator. Given this affects "trace
path building" and traversing the path back from the sink to source,
add the concept of "filtering by source" to the generic coresight
connection.

The specified source will be marked like below in the Devicetree.
test-replicator {
    ... ... ... ...
    out-ports {
        ... ... ... ...
        port@0 {
            reg = <0>;
            xyz: endpoint {
                remote-endpoint = <&zyx>;
                filter-source = <&source_1>; <-- To specify the source to
            };                           be filtered out here.
        };

        port@1 {
            reg = <1>;
            abc: endpoint {
                remote-endpoint = <&cba>;
                filter-source = <&source_2>; <-- To specify the source to
            };                           be filtered out here.
        };
    };
};

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-4-quic_taozha@quicinc.com

Since there are a lot of places in the code to check whether the
device is source, add a helper to check it.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-3-quic_taozha@quicinc.com

dsb_mode_store() warn: unsigned 'val' is never less than zero.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410150702.UaZ7kvet-lkp@intel.com/
Fixes: 018e43ad1eee ("coresight-tpdm: Add node to set dsb programming mode")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/122503017ada249fbf12be3fa4ee6ccb8f8c78cc.1732156624.git.xiaopei01@kylinos.cn