linux-toradex.git/drivers/i2c/chips/Kconfig, branch v2.6.19.2

[PATCH] i2c: Suggest N for rare devices in Kconfig

2006-06-22T18:10:33+00:00

Improve the Kconfig help text of the follwing i2c drivers:
* busses/i2c-pca-isa.c
* chips/pcf8574.c
* chips/pcf8591.c
These are hard to detect and building them into the kernel
results in long delays at boot.

March 2006, thread "I2C_PCA_ISA causes boot delays"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2

April 2006, thread "i2c-related 1-minute hang during bootup"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2

Signed-off-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

[PATCH] RTC subsystem: I2C cleanup

2006-03-27T16:44:51+00:00

This patch, completely optional, removes from drivers/i2c/chips all the
drivers that are implemented in the new RTC subsystem.

It should be noted that none of the current driver is actually integrated,
i.e.  usable without further patches.

Signed-off-by: Alessandro Zummo 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] i2c: New Xicor X1205 RTC driver

2005-10-28T21:02:12+00:00

New driver for the Xicor X1205 RTC chip.

Signed-off-by: Alessandro Zummo 
Signed-off-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

[PATCH] hwmon: hwmon vs i2c, second round (07/11)

2005-09-05T16:14:22+00:00

The only part left in i2c-sensor is the VRM/VRD/VID handling code.
This is in no way related to i2c, so it doesn't belong there. Move
the code to hwmon, where it belongs.

Note that not all hardware monitoring drivers do VRM/VRD/VID
operations, so less drivers depend on hwmon-vid than there were
depending on i2c-sensor.

Signed-off-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: Move hwmon drivers (1/3)

2005-07-11T21:14:31+00:00

Part 1: Configuration files and Makefiles.

From: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: SENSORS_ATXP1 must select I2C_SENSOR

2005-07-11T21:10:37+00:00

On Thu, Jun 30, 2005 at 11:47:09PM +0200, Sebastian Pigulak wrote:
> I've tried patching linux-2.6.13-RC1 with patch-2.6.13-rc1-git2 and
> building atxp1(it allows Vcore voltage changing) into the kernel.
> Unfortunately, the kernel compilation stops with:
>
> LD      init/built-in.o
> LD      vmlinux
> drivers/built-in.o(.text+0x92298): In function `atxp1_detect':
> : undefined reference to `i2c_which_vrm'
> drivers/built-in.o(.text+0x921ae): In function `atxp1_attach_adapter':
> : undefined reference to `i2c_detect'
> make: *** [vmlinux] B??d 1
> ==> ERROR: Build Failed.  Aborting...
>
> Could someone have a look at the module and possibly fix it up?

SENSORS_ATXP1 must select I2C_SENSOR.

Signed-off-by: Adrian Bunk 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: max6875 Kconfig update

2005-07-11T21:10:36+00:00

Here is a proposed Kconfig update for the new max6875 i2c chip driver.

Signed-off-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: minor TPS6501x cleanups

2005-07-11T21:10:36+00:00

This includes various small cleanups and fixes to the TPS 6501x driver that
came mostly from review feedback by Jean Delvare; thanks Jean!  Also some
goofy whitespace gets fixed.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2)

2005-06-22T04:52:06+00:00

Add support for Maxim/Dallas DS1374 Real-Time Clock Chip

This change adds support for the Maxim/Dallas DS1374 RTC chip. This chip
is an I2C-based RTC that maintains a simple 32-bit binary seconds count
with battery backup support.

Signed-off-by: Randy Vinson 
Signed-off-by: Greg Kroah-Hartman

[PATCH] I2C: add new pca9539 driver

2005-06-22T04:52:05+00:00

This is an i2c driver for the Philips PCA9539 (16 bit I/O port).
It uses the new i2c-sysfs interfaces.
The patch includes documentation.
It depends on the patch that renames "i2c-sysfs.h" to "hwmon-sysfs.h"

Signed-off-by: Ben Gardner 
Signed-off-by: Greg Kroah-Hartman