linux-toradex.git/drivers/i2c/chips, branch master Linux kernel for Apalis and Colibri modules tsl2550: Move from i2c/chips to misc 2010-03-13T19:56:54+00:00 Jean Delvare khali@linux-fr.org 2010-03-13T19:56:54+00:00 6a9bcced518b98a7e52b9e8e96af228b171e0498 Move the last remaining driver from i2c/chips to misc. Good ridance! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> 
Move the last remaining driver from i2c/chips to misc. Good ridance!

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
i2c/chips: Move ds1682 to drivers/misc 2009-12-06T16:06:16+00:00 Wolfram Sang w.sang@pengutronix.de 2009-12-06T16:06:16+00:00 dddc66ffa048fbc842f5de385031f1826649ffc2 As i2c/chips is deprecated, move ds1682 to a more apropriate location. Build tested. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
As i2c/chips is deprecated, move ds1682 to a more apropriate location.
Build tested.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/tsl2550: Fix lux value in extended mode 2009-11-26T08:22:32+00:00 Michele Jr De Candia michele.decandia@valueteam.com 2009-11-26T08:22:32+00:00 5f5bfb09d81c9a1d26238ae6668e584c14ae3daf According to the TAOS Application Note 'Controlling a Backlight with the TSL2550 Ambient Light Sensor' (page 14), the actual lux value in extended mode should be obtained multiplying the calculated lux value by 5. Signed-off-by: Michele Jr De Candia <michele.decandia@valueteam.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
According to the TAOS Application Note 'Controlling a Backlight with
the TSL2550 Ambient Light Sensor' (page 14), the actual lux value in
extended mode should be obtained multiplying the calculated lux value
by 5.

Signed-off-by: Michele Jr De Candia <michele.decandia@valueteam.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/chips: Remove deprecated pcf8574 driver 2009-09-18T20:45:49+00:00 Wolfram Sang w.sang@pengutronix.de 2009-09-18T20:45:49+00:00 e7c5c49ecdac6dc5a6b67a27838b1b562eeec1b9 The pcf8574 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
The pcf8574 driver in drivers/i2c/chips which just exports its register to
sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/chips: Remove deprecated pca9539 driver 2009-09-18T20:45:48+00:00 Wolfram Sang w.sang@pengutronix.de 2009-09-18T20:45:48+00:00 732d481127abaa0add41ee918191ea08e9ede17e The pca9539 driver in drivers/i2c/chips which just exports its registers to sysfs is superseded by drivers/gpio/pca953x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
The pca9539 driver in drivers/i2c/chips which just exports its registers to
sysfs is superseded by drivers/gpio/pca953x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/chips: Remove deprecated pcf8575 driver 2009-09-18T20:45:48+00:00 Wolfram Sang w.sang@pengutronix.de 2009-09-18T20:45:48+00:00 8f67eeb0b44cde19216955975ffef8513a87c0c0 The pcf8575 driver in drivers/i2c/chips which just exports its register to sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib. As this driver has been deprecated for more than a year, finally remove it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
The pcf8575 driver in drivers/i2c/chips which just exports its register to
sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/tsl2550: Use combined SMBus transactions 2009-09-18T20:45:44+00:00 Jean Delvare khali@linux-fr.org 2009-09-18T20:45:44+00:00 ac7809414fb1e3e49b88ad6016e57598594aa4e2 Make the I/O faster, mainly by using combined SMBus transactions when possible. While the TSL2550 datasheet doesn't say the device supports them, they seem to work just fine in practice, and a combined transaction is faster than two simple transactions in many cases and always more reliable. A side effect is to suppress the delays between SMBus writes and reads. The datasheet doesn't say they are needed and things work just fine for me without them. I also couldn't see any reason for the delay between reading the two channels. Nor for the loop to get a reading in the first place. The 400 ms delay between samples only matters at chip power-up, after that the chip always hold the previously sampled value so we never get to wait. All these changes make reading the lux value much faster and cheaper. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Michele De Candia <michele.decandia@valueteam.com> Cc: Rodolfo Giometti <giometti@linux.it> 
Make the I/O faster, mainly by using combined SMBus transactions when
possible. While the TSL2550 datasheet doesn't say the device supports
them, they seem to work just fine in practice, and a combined
transaction is faster than two simple transactions in many cases and
always more reliable.

A side effect is to suppress the delays between SMBus writes and
reads. The datasheet doesn't say they are needed and things work just
fine for me without them.

I also couldn't see any reason for the delay between reading the two
channels. Nor for the loop to get a reading in the first place. The
400 ms delay between samples only matters at chip power-up, after that
the chip always hold the previously sampled value so we never get to
wait.

All these changes make reading the lux value much faster and cheaper.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michele De Candia <michele.decandia@valueteam.com>
Cc: Rodolfo Giometti <giometti@linux.it>
i2c/tsl2550: Fix lux value in dark environment 2009-07-28T14:33:03+00:00 Michele Jr De Candia michele.decandia@valueteam.com 2009-07-28T14:33:03+00:00 96f699ad09c8b3c55cd229506a9add0047838e3e I've tested TSL2550 driver and I've found a bug: when light is off, returned value from tsl2550_calculate_lux function is -1 when it should be 0 (sensor correctly read that light was off). I think the bug is that a zero c0 value (approximated value of ch0) is misinterpreted as an error. Signed-off-by: Michele Jr De Candia <michele.decandia@valueteam.com> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
I've tested TSL2550 driver and I've found a bug: when light is off, 
returned value from tsl2550_calculate_lux function is -1 when it should 
be 0 (sensor correctly read that light was off).

I think the bug is that a zero c0 value (approximated value of ch0) is 
misinterpreted as an error. 

Signed-off-by: Michele Jr De Candia <michele.decandia@valueteam.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
i2c/chips: Move max6875 to drivers/misc/eeprom 2009-06-15T16:01:49+00:00 Wolfram Sang w.sang@pengutronix.de 2009-06-15T16:01:49+00:00 4b364f230a5ef984818837ec7c2be0884eac191c This driver only reads the user EEPROM of that chip, so we can move it to the eeprom-directory in order to further clean up (and later remove) drivers/i2c/chips. The Kconfig text was updated to match the current functionality, dropping the meanwhile obsoleted parts. Defconfigs have been adapted. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> 
This driver only reads the user EEPROM of that chip, so we can move it
to the eeprom-directory in order to further clean up (and later remove)
drivers/i2c/chips.

The Kconfig text was updated to match the current functionality,
dropping the meanwhile obsoleted parts.

Defconfigs have been adapted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Move the pcf8591 driver to hwmon 2009-03-30T19:46:43+00:00 Jean Delvare khali@linux-fr.org 2009-03-30T19:46:43+00:00 fb4504fe84b09cbf49fda19e6630a1003d79656a Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net> 
Directory drivers/i2c/chips is going away, so drivers there must find
new homes. For the pcf8591 driver, the best choice seems to be the
hwmon subsystem. While the Philips PCF8591 device isn't a typical
hardware monitoring chip, its DAC interface is compatible with the
hwmon one, so it fits somewhat.

If a better subsystem is ever created for ADC/DAC chips, the driver
could be moved there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>