linux-toradex.git/drivers/i2c, branch v4.4.85

i2c: designware: Fix system suspend

2017-08-30T08:19:23+00:00

commit a23318feeff662c8d25d21623daebdd2e55ec221 upstream.

The commit 8503ff166504 ("i2c: designware: Avoid unnecessary resuming
during system suspend"), may suggest to the PM core to try out the so
called direct_complete path for system sleep. In this path, the PM core
treats a runtime suspended device as it's already in a proper low power
state for system sleep, which makes it skip calling the system sleep
callbacks for the device, except for the ->prepare() and the ->complete()
callbacks.

However, the PM core may unset the direct_complete flag for a parent
device, in case its child device are being system suspended before. In this
scenario, the PM core invokes the system sleep callbacks, no matter if the
device is runtime suspended or not.

Particularly in cases of an existing i2c slave device, the above path is
triggered, which breaks the assumption that the i2c device is always
runtime resumed whenever the dw_i2c_plat_suspend() is being called.

More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and
clk_core_unprepare(), for an already disabled/unprepared clock, leading to
a splat in the log about clocks calls being wrongly balanced and breaking
system sleep.

To still allow the direct_complete path in cases when it's possible, but
also to keep the fix simple, let's runtime resume the i2c device in the
->suspend() callback, before continuing to put the device into low power
state.

Note, in cases when the i2c device is attached to the ACPI PM domain, this
problem doesn't occur, because ACPI's ->suspend() callback, assigned to
acpi_subsys_suspend(), already calls pm_runtime_resume() for the device.

It should also be noted that this change does not fix commit 8503ff166504
("i2c: designware: Avoid unnecessary resuming during system suspend").
Because for the non-ACPI case, the system sleep support was already broken
prior that point.

Signed-off-by: Ulf Hansson 
Acked-by: Rafael J. Wysocki 
Tested-by: John Stultz 
Tested-by: Jarkko Nikula 
Acked-by: Jarkko Nikula 
Reviewed-by: Mika Westerberg 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: piix4: Fix request_region size

2017-06-17T04:39:36+00:00

[ Upstream commit f43128c75202f29ee71aa83e6c320a911137c189 ]

Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.

Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado 
Signed-off-by: Jean Delvare 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

i2c: i2c-tiny-usb: fix buffer not being DMA capable

2017-06-07T10:06:00+00:00

commit 5165da5923d6c7df6f2927b0113b2e4d9288661e upstream.

Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

Signed-off-by: Sebastian Reichel 
Reviewed-by: Greg Kroah-Hartman 
Acked-by: Till Harbaum 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: fix kernel memory disclosure in dev interface

2017-01-19T19:17:20+00:00

commit 30f939feaeee23e21391cfc7b484f012eb189c3c upstream.

i2c_smbus_xfer() does not always fill an entire block, allowing
kernel stack memory disclosure through the temp variable. Clear
it before it's read to.

Signed-off-by: Vlad Tsyrklevich 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: print correct device invalid address

2017-01-19T19:17:20+00:00

commit 6f724fb3039522486fce2e32e4c0fbe238a6ab02 upstream.

In of_i2c_register_device(), when the check for
device address validity fails we print the info.addr,
which has not been assigned properly.

Fix this by printing the actual invalid address.

Signed-off-by: John Garry 
Reviewed-by: Vladimir Zapolskiy 
Signed-off-by: Wolfram Sang 
Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing")
Signed-off-by: Greg Kroah-Hartman

i2c: mux: fix up dependencies

2016-11-26T08:54:52+00:00

commit 93d710a65ef02fb7fd48ae207e78f460bd7a6089 upstream.

We get the following build error from UM Linux after adding
an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX":

ERROR: "devm_ioremap_resource"
   [drivers/i2c/muxes/i2c-mux-reg.ko] undefined!
ERROR: "of_address_to_resource"
   [drivers/i2c/muxes/i2c-mux-reg.ko] undefined!

It appears that the I2C mux core code depends on HAS_IOMEM
for historical reasons, while CONFIG_I2C_MUX_REG does *not*
have a direct dependency on HAS_IOMEM.

This creates a situation where a allyesconfig or allmodconfig
for UM Linux will select I2C_MUX, and will implicitly enable
I2C_MUX_REG as well, and the compilation will fail for the
register driver.

Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and
removing the dependency from I2C_MUX.

Reported-by: kbuild test robot 
Reported-by: Jonathan Cameron 
Signed-off-by: Linus Walleij 
Acked-by: Jonathan Cameron 
Acked-by: Peter Rosin 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: core: fix NULL pointer dereference under race condition

2016-11-10T15:36:31+00:00

commit 147b36d5b70c083cc76770c47d60b347e8eaf231 upstream.

Race condition between registering an I2C device driver and
deregistering an I2C adapter device which is assumed to manage that
I2C device may lead to a NULL pointer dereference due to the
uninitialized list head of driver clients.

The root cause of the issue is that the I2C bus may know about the
registered device driver and thus it is matched by bus_for_each_drv(),
but the list of clients is not initialized and commonly it is NULL,
because I2C device drivers define struct i2c_driver as static and
clients field is expected to be initialized by I2C core:

  i2c_register_driver()             i2c_del_adapter()
    driver_register()                 ...
      bus_add_driver()                ...
        ...                           bus_for_each_drv(..., __process_removed_adapter)
      ...                               i2c_do_del_adapter()
    ...                                   list_for_each_entry_safe(..., &driver->clients, ...)
    INIT_LIST_HEAD(&driver->clients);

To solve the problem it is sufficient to do clients list head
initialization before calling driver_register().

The problem was found while using an I2C device driver with a sluggish
registration routine on a bus provided by a physically detachable I2C
master controller, but practically the oops may be reproduced under
the race between arbitraty I2C device driver registration and managing
I2C bus device removal e.g. by unbinding the latter over sysfs:

% echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind
  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  Internal error: Oops: 17 [#1] SMP ARM
  CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  task: e5ada400 task.stack: e4936000
  PC is at i2c_do_del_adapter+0x20/0xcc
  LR is at __process_removed_adapter+0x14/0x1c
  Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: 35bd004a  DAC: 00000051
  Process sh (pid: 533, stack limit = 0xe4936210)
  Stack: (0xe4937d28 to 0xe4938000)
  Backtrace:
  [] (i2c_do_del_adapter) from [] (__process_removed_adapter+0x14/0x1c)
  [] (__process_removed_adapter) from [] (bus_for_each_drv+0x6c/0xa0)
  [] (bus_for_each_drv) from [] (i2c_del_adapter+0xbc/0x284)
  [] (i2c_del_adapter) from [] (i2c_imx_remove+0x44/0x164 [i2c_imx])
  [] (i2c_imx_remove [i2c_imx]) from [] (platform_drv_remove+0x2c/0x44)
  [] (platform_drv_remove) from [] (__device_release_driver+0x90/0x12c)
  [] (__device_release_driver) from [] (device_release_driver+0x28/0x34)
  [] (device_release_driver) from [] (unbind_store+0x80/0x104)
  [] (unbind_store) from [] (drv_attr_store+0x28/0x34)
  [] (drv_attr_store) from [] (sysfs_kf_write+0x50/0x54)
  [] (sysfs_kf_write) from [] (kernfs_fop_write+0x100/0x214)
  [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120)
  [] (__vfs_write) from [] (vfs_write+0xa8/0x170)
  [] (vfs_write) from [] (SyS_write+0x4c/0xa8)
  [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c)

Signed-off-by: Vladimir Zapolskiy 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: xgene: Avoid dma_buffer overrun

2016-11-10T15:36:31+00:00

commit 603616017c35f4d0fbdbcace72adf9bf949c4a65 upstream.

SMBus block command uses the first byte of buffer for the data length.
The dma_buffer should be increased by 1 to avoid the overrun issue.

Reported-by: Phil Endecott 
Signed-off-by: Hoan Tran 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended

2016-09-30T08:18:38+00:00

commit 331dcf421c34d227784d07943eb01e4023a42b0a upstream.

If the i2c device is already runtime suspended, if qup_i2c_suspend is
executed during suspend-to-idle or suspend-to-ram it will result in the
following splat:

WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90
Modules linked in:

CPU: 3 PID: 1593 Comm: bash Tainted: G        W       4.8.0-rc3 #14
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
PC is at clk_core_unprepare+0x80/0x90
LR is at clk_unprepare+0x28/0x40
pc : [] lr : [] pstate: 60000145
Call trace:
 clk_core_unprepare+0x80/0x90
 qup_i2c_disable_clocks+0x2c/0x68
 qup_i2c_suspend+0x10/0x20
 platform_pm_suspend+0x24/0x68
 ...

This patch fixes the issue by executing qup_i2c_pm_suspend_runtime
conditionally in qup_i2c_suspend.

Signed-off-by: Sudeep Holla 
Reviewed-by: Andy Gross 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c-eg20t: fix race between i2c init and interrupt enable

2016-09-30T08:18:38+00:00

commit 371a015344b6e270e7e3632107d9554ec6d27a6b upstream.

the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.

there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.

At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.

Signed-off-by: Yadi.hu 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman