linux-toradex.git/drivers/i2c, branch v5.10-rc3 Linux kernel for Apalis and Colibri modules i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED 2020-11-06T15:02:00+00:00 Michael Wu michael.wu@vatics.com 2020-10-30T08:04:20+00:00 3b5f7f10ff6e6b66f553e12cc50d9bb751ce60ad Sometimes we would get the following flow when doing an i2cset: 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4 I2C_SLAVE_WRITE_RECEIVED 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204 I2C_SLAVE_WRITE_REQUESTED I2C_SLAVE_WRITE_RECEIVED Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED, which is mandatory, should be sent while the data did not arrive yet. It means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported before any I2C_SLAVE_WRITE_RECEIVED. By the way, I2C_SLAVE_STOP didn't be reported in the above case because DW_IC_INTR_STAT was not 0x200. dev->status can be used to record the current state, especially Designware I2C controller has no interrupts to identify a write-request. This patch makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS but also I2C_SLAVE_STOP been reported when a STOP condition is received. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
Sometimes we would get the following flow when doing an i2cset:

0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
I2C_SLAVE_WRITE_RECEIVED
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
I2C_SLAVE_WRITE_REQUESTED
I2C_SLAVE_WRITE_RECEIVED

Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED,
which is mandatory, should be sent while the data did not arrive yet. It
means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported
before any I2C_SLAVE_WRITE_RECEIVED.

By the way, I2C_SLAVE_STOP didn't be reported in the above case because
DW_IC_INTR_STAT was not 0x200.

dev->status can be used to record the current state, especially Designware
I2C controller has no interrupts to identify a write-request. This patch
makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when
IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS
but also I2C_SLAVE_STOP been reported when a STOP condition is received.

Signed-off-by: Michael Wu <michael.wu@vatics.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: designware: call i2c_dw_read_clear_intrbits_slave() once 2020-11-06T15:01:48+00:00 Michael Wu michael.wu@vatics.com 2020-10-30T08:04:19+00:00 66b92313e2ca9208b5f3ebf5d86e9a818299d8fa If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in i2c_dw_isr_slave() and not handled immediately, those cleared bits would not be shown again by later i2c_dw_read_clear_intrbits_slave(). They therefore were forgotten to be handled. i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take its returned state for all later handlings. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in
i2c_dw_isr_slave() and not handled immediately, those cleared bits would
not be shown again by later i2c_dw_read_clear_intrbits_slave(). They
therefore were forgotten to be handled.

i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take
its returned state for all later handlings.

Signed-off-by: Michael Wu <michael.wu@vatics.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM 2020-11-06T14:55:57+00:00 Geert Uytterhoeven geert+renesas@glider.be 2020-10-05T12:49:49+00:00 9890923be3a6d5e606cf4ae4f4e632a5e38cb37c The Mellanox BlueField I2C controller is only present on Mellanox BlueField SoCs. Hence add a dependency on MELLANOX_PLATFORM, to prevent asking the user about this driver when configuring a kernel without Mellanox platform support. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
The Mellanox BlueField I2C controller is only present on Mellanox
BlueField SoCs.  Hence add a dependency on MELLANOX_PLATFORM, to prevent
asking the user about this driver when configuring a kernel without
Mellanox platform support.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: Update author and maintainer email info 2020-11-06T14:52:19+00:00 Khalil Blaiech kblaiech@nvidia.com 2020-11-03T19:54:42+00:00 54b9c3d0cea53f84024eed11ff8b6807e2ec81bf Correct the email addresses of the author and the maintainer of the Mellanox BlueField I2C driver. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
Correct the email addresses of the author and the maintainer
of the Mellanox BlueField I2C driver.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: Update reference clock frequency 2020-11-06T14:52:11+00:00 Khalil Blaiech kblaiech@nvidia.com 2020-11-03T19:54:41+00:00 67ee9fda6ed4958f4caf8f1a3a5102a2c27ddf7b The reference clock frequency remains the same across Bluefield products. Thus, update the frequency and rename the macro. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
The reference clock frequency remains the same across Bluefield
products. Thus, update the frequency and rename the macro.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: Remove unecessary wrapper functions 2020-11-06T14:51:57+00:00 Khalil Blaiech kblaiech@nvidia.com 2020-11-03T19:54:40+00:00 4b19d806ac5272bb9f64d78ca6832867870eb45d Few wrapper functions are useless and can be inlined. So delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace them with readl() and writel(), respectively. Also delete mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace them with ioread32be() and iowrite32be(), respectively. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
Few wrapper functions are useless and can be inlined. So
delete mlxbf_i2c_read() and mlxbf_i2c_write() and replace
them with readl() and writel(), respectively. Also delete
mlxbf_i2c_read_data() and mlxbf_i2c_write() and replace
them with ioread32be() and iowrite32be(), respectively.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: Fix resrticted cast warning of sparse 2020-11-06T14:51:47+00:00 Khalil Blaiech kblaiech@nvidia.com 2020-11-03T19:54:39+00:00 08e019e27a9ed0d6c410176cab4e029e3d233cb8 Address warnings "warning: cast to restricted __be32" reported by sparse. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
Address warnings "warning: cast to restricted __be32" reported
by sparse.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call 2020-11-06T14:51:40+00:00 Khalil Blaiech kblaiech@nvidia.com 2020-11-03T19:54:38+00:00 ed01ddc618fc356bbc7b702823c87ed3ada198a6 The build fails with "implicit declaration of function 'acpi_device_uid'" error. Thus, protect ACPI function calls from being called when CONFIG_ACPI is disabled. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
The build fails with "implicit declaration of function
'acpi_device_uid'" error. Thus, protect ACPI function calls
from being called when CONFIG_ACPI is disabled.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: sh_mobile: implement atomic transfers 2020-11-06T14:25:31+00:00 Ulrich Hecht uli+renesas@fpond.eu 2020-09-28T15:59:50+00:00 a49cc1fe9d64a2dc4e19b599204f403e5d25f44b Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and similar boards. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> [wsa: some whitespace fixing] Signed-off-by: Wolfram Sang <wsa@kernel.org> 
Implements atomic transfers to fix reboot/shutdown on r8a7790 Lager and
similar boards.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
[wsa: some whitespace fixing]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c: mediatek: move dma reset before i2c reset 2020-11-03T21:13:10+00:00 Qii Wang qii.wang@mediatek.com 2020-10-30T11:58:01+00:00 aafced673c06b7c77040c1df42e2e965be5d0376 The i2c driver default do dma reset after i2c reset, but sometimes i2c reset will trigger dma tx2rx, then apdma write data to dram which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset before i2c reset in mtk_i2c_init_hw to fix it. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 
The i2c driver default do dma reset after i2c reset, but sometimes
i2c reset will trigger dma tx2rx, then apdma write data to dram
which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset
before i2c reset in mtk_i2c_init_hw to fix it.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>