Add SMBus PCI IDs on Intel Nova Lake-S.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251124132816.470599-1-heikki.krogerus@linux.intel.com

'i2c_types' is an enum, thus cast of pointer on 64-bit compile test with
clang and W=1 causes:

  i2c-rcar.c:1144:18: error: cast to smaller integer type 'enum rcar_i2c_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

One of the discussions in 2023 on LKML suggested warning is not suitable
for kernel.  Nothing changed in this regard since that time, so assume
the warning will stay and we want to have warnings-free builds.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251126182257.157439-6-krzysztof.kozlowski@oss.qualcomm.com

'i2c_types' is an enum, thus cast of pointer on 64-bit compile test with
clang and W=1 causes:

  i2c-pxa.c:1269:15: error: cast to smaller integer type 'enum pxa_i2c_types' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

One of the discussions in 2023 on LKML suggested warning is not suitable
for kernel.  Nothing changed in this regard since that time, so assume
the warning will stay and we want to have warnings-free builds.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251126182257.157439-5-krzysztof.kozlowski@oss.qualcomm.com

'type' is an enum, thus cast of pointer on 64-bit compile test with
clang and W=1 causes:

  i2c-bcm-iproc.c:1102:3: error: cast to smaller integer type 'enum bcm_iproc_i2c_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

One of the discussions in 2023 on LKML suggested warning is not suitable
for kernel.  Nothing changed in this regard since that time, so assume
the warning will stay and we want to have warnings-free builds.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251126182257.157439-4-krzysztof.kozlowski@oss.qualcomm.com

Pull i2c updates from Wolfram Sang:

 - general cleanups in bcm2835, designware, pcf8584, and stm32

 - amd-mp2: fix device refcount

 - designware: avoid interrupt storms caused by bad firmware

 - spacemit: fix device detection failures

 - new devices: Intel Diamond Rapids, Rockchip RK3506, Qualcomm
   Kaanapali and MSM8953

 - minor fixes to i801, core documentation, elektor Kconfig dependencies

 - at24 updates: add new compatible for Belling BL24S64

* tag 'i2c-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (21 commits)
  i2c: qcom-cci: Add msm8953 compatible
  i2c: spacemit: fix detect issue
  i2c: amd-mp2: fix reference leak in MP2 PCI device
  i2c: i2c.h: fix a bad kernel-doc line
  i2c: i2c-elektor: Allow building on SMP kernels
  dt-bindings: i2c: qcom-cci: Document Kaanapali compatible
  dt-bindings: i2c: qcom-cci: Document msm8953 compatible
  dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
  i2c: i801: Fix the Intel Diamond Rapids features
  i2c: pcf8584: Change pcf_doAdress() to pcf_send_address()
  i2c: pcf8584: Make pcf_doAddress() function void
  i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.
  i2c: designware: Disable SMBus interrupts to prevent storms from mis-configured firmware
  dt-bindings: i2c: i2c-rk3x: Add compatible string for RK3506
  i2c: i801: Add support for Intel Diamond Rapids
  i2c: stm32: Omit two variable reassignments in stm32_i2c_dma_request()
  i2c: designware: Omit a variable reassignment in dw_i2c_plat_probe()
  i2c: pcf8584: Fix do not use assignment inside if conditional
  i2c: pcf8584: Remove debug macros from i2c-algo-pcf.c
  i2c: busses: bcm2835: convert from round_rate() to determine_rate()
  ...

Pull dmaengine updates from Vinod Koul:

 - Renesas driver conversion to RUNTIME_PM_OPS() etc

 - Dropping module alias on bunch of drivers

 - GPI Block event interrupt support in Qualcomm driver and updates to
   I2C driver as well

* tag 'dmaengine-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
  dt-bindings: dma: xilinx: Simplify dma-coherent property
  dmaengine: fsl-edma: configure tcd attr with separate src and dst settings
  dmaengine: st_fdma: drop unused module alias
  dmaengine: bcm2835: enable compile testing
  dmaengine: tegra210-adma: drop unused module alias
  dmaengine: sprd: drop unused module alias
  dmaengine: mmp_tdma: drop unnecessary OF node check in remove
  dmaengine: mmp_tdma: drop unused module alias
  dmaengine: k3dma: drop unused module alias
  dmaengine: fsl-qdma: drop unused module alias
  dmaengine: fsl-edma: drop unused module alias
  dmaengine: dw: drop unused module alias
  dmaengine: bcm2835: drop unused module alias
  dmaengine: at_hdmac: add COMPILE_TEST support
  dmaengine: at_hdmac: fix formats under 64-bit
  i2c: i2c-qcom-geni: Add Block event interrupt support
  dmaengine: qcom: gpi: Add GPI Block event interrupt support
  dmaengine: idxd: drain ATS translations when disabling WQ
  dmaengine: sh: Kconfig: Drop ARCH_R7S72100/ARCH_RZG2L dependency
  dmaengine: rcar-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()
  ...

Add a config for the v1.2.5 CCI found on msm8953 which has different
values in .params compared to others already supported in the driver.

Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

i2c-host for v6.19

- general cleanups in bcm2835, designware, pcf8584, and stm32
- amd-mp2: fix device refcount
- designware: avoid interrupt storms caused by bad firmware
- i801: fix supported features
- spacemit: fix device detection failures

New device support:
- Intel Diamond Rapids
- Rockchip RK3506
- Qualcomm Kaanapali, MSM8953

This commit addresses two issues causing i2c detect to fail.

The identified issues are:

1. Incorrect error handling for BED (Bus Error No ACK/NAK):
   Before this commit, Both ALD (Arbitration Loss Detected) and
   BED returned -EAGAIN.
2. Missing interrupt status clear after initialization in xfer():
   On the K1 SoC, simply fixing the first issue changed the error
   from -EAGAIN to -ETIMEOUT. Through tracing, it was determined that
   this is likely due to MSD (Master Stop Detected) latency issues.

   That means the MSD bit in the ISR may still be set on the next transfer.
   As a result, the controller won't work — we can see from the scope that
   it doesn't issue any signal.
   (This only occurs during rapid consecutive I2C transfers.
   That explains why the issue only shows up with i2cdetect.)

With these two fixes, i2c device detection now functions correctly on the K1 SoC.

Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251113-fix-k1-detect-failure-v2-1-b02a9a74f65a@linux.spacemit.com

In i2c_amd_probe(), amd_mp2_find_device() utilizes
driver_find_next_device() which internally calls driver_find_device()
to locate the matching device. driver_find_device() increments the
reference count of the found device by calling get_device(), but
amd_mp2_find_device() fails to call put_device() to decrement the
reference count before returning. This results in a reference count
leak of the PCI device each time i2c_amd_probe() is executed, which
may prevent the device from being properly released and cause a memory
leak.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251022095402.8846-1-make24@iscas.ac.cn