linux-toradex.git/drivers/ide/Kconfig, branch v2.6.19.2

[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.

2006-10-03T16:59:17+00:00

As per feature-removal-schedule.txt.

Signed-off-by: Yoichi Yuasa 
Acked-by: Alan Cox 
Signed-off-by: Ralf Baechle

[PATCH] Make number of IDE interfaces configurable

2006-10-03T15:04:07+00:00

Make IDE_HWIFS configurable if EMBEDDED

This lets us lop as much as 16k off an x86 build.  It's a little ugly, but
it's dead simple.  Note the fix for HWIFS < 2.

Sizing interfaces dynamically unfortunately turns out to be pretty
major surgery.

add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)
function                                     old     new   delta
ide_hwifs                                  16920    1692  -15228
init_irq                                    1113     750    -363
ideprobe_init                                283     138    -145
ide_pci_setup_ports                         1329    1193    -136
save_match                                    85       -     -85
ide_register_hw_with_fixup                   367     287     -80
ide_setup                                   1364    1308     -56
is_chipset_set                                40       4     -36
create_proc_ide_interfaces                   225     205     -20
init_ide_data                                 84      67     -17
ide_probe_for_cmd640x                       1198    1183     -15
ide_unregister                              1452    1451      -1

Signed-off-by: Matt Mackall 
Cc: Bartlomiej Zolnierkiewicz 
Acked-by: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] non-libata driver for Jmicron devices

2006-10-03T15:04:07+00:00

Less functional than libata this just uses the merged interface provided for
dumb legacy OS's.  This is basically a bridge for people not yet ready to use
libata for some reason or another.

Port visibility is entirely dependant on the BIOS setup.

Signed-off-by: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

2006-09-30T18:52:31+00:00

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells 
Signed-off-by: Jens Axboe

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

2006-07-31T20:39:52+00:00

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Minor comment fix for misc_64.S
  [POWERPC] Use H_CEDE on non-SMT
  [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs
  [POWERPC] PMAC_APM_EMU should depend on ADB_PMU
  [POWERPC] Fix new interrupt code (MPIC detection)
  [POWERPC] Fix new interrupt code (MPIC endianness)
  [POWERPC] Add cpufreq support for Xserve G5
  [POWERPC] Xserve G5 thermal control fixes
  [POWERPC] Fix mem= handling when the memory limit is > RMO size
  [POWERPC] More offb/bootx fixes
  [POWERPC] Fix legacy_serial.c error handling on 32 bits
  [POWERPC] Fix default clock for udbg_16550
  [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set
  [POWERPC] Fix 32 bits warning in prom_init.c
  [POWERPC] Workaround Pegasos incorrect ISA "ranges"
  [POWERPC] fix up front-LED Kconfig

[PATCH] sgiioc4: Always share IRQ

2006-07-31T20:28:40+00:00

The SGI IOC4 IDE device always shares an interrupt with other devices which
are part of IOC4.  As such, IDEPCI_SHARE_IRQ should always be enabled when
BLK_DEV_SGIIOC4 is enabled.

Signed-off-by: Brent Casavant 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[POWERPC] fix up front-LED Kconfig

2006-07-25T15:26:08+00:00

This patch fixes the front-LED Kconfig issues I introduced while
creating it. Apparently having a dependency isn't enough to have the
select not evaluated or something like that.

The patch also changes the default configuration for pmac32 select the
default for the LED to be the IDE trigger. While I was at it, I
completely updated the defconfig and also added snd-aoa to it.

Signed-off-by: Johannes Berg 
Signed-off-by: Paul Mackerras

[POWERPC] Convert powermac ide blink to new led infrastructure

2006-06-28T01:51:12+00:00

This patch removes the old pmac ide led blink code and
adds generic LED subsystem support for the LED.

It maintains backward compatibility with the old
BLK_DEV_IDE_PMAC_BLINK Kconfig option which now
simply selects the new code and influences the
default trigger.

Signed-off-by: Johannes Berg 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] IDE: always enable CONFIG_PDC202XX_FORCE

2006-02-03T16:32:13+00:00

Remove the CONFIG_PDC202XX_FORCE=n case.

Signed-off-by: Adrian Bunk 
Acked-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ide Kconfig fixes

2006-02-03T16:32:11+00:00

CONFIG_BLK_DEV_IDECS docu mentions everything and the kitchen sink, yet
fails to list the most important/widespread (IMHO) device: Compact Flash
PCMCIA adapters.

This incomplete description recently caused me to deselect the ide_cs
module, causing great pain soon thereafter when I realized why I had
actually enabled it some years ago.

Updates:
- make sure to mention Compact Flash adapters
- fix some random typos in ide Kconfig

Signed-off-by: Andreas Mohr 
Acked-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds