linux-toradex.git/drivers/ieee1394, branch v2.6.19.3

[PATCH] ieee1394: sbp2: fix probing of some DVD-ROM/RWs

2007-02-05T16:31:40+00:00

Since commit 98e238cd42be6c0852da519303cf0182690f8d9f in Linux 2.6.19,
"ieee1394: sbp2: don't prefer MODE SENSE 10", some FireWire DVD-ROMs and
DVD-RWs were mistaken as CD-ROM because sr_mod now sent MODE SENSE 6.
The MMC command set includes only MODE SENSE 10.
http://bugzilla.kernel.org/show_bug.cgi?id=7800

This fix lets sbp2 switch scsi_device.use_10_for_rw on for MMC LUs.
This should rather be done in the command set driver sr_mod, not in the
sbp2 transport driver, and an according patch will follow for a next
Linux release.

Signed-off-by: Stefan Richter 
Signed-off-by: Chris Wright

[PATCH] ieee1394: ohci1394: add PPC_PMAC platform code to driver probe

2007-01-10T19:05:18+00:00

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431
iBook G3 threw a machine check exception and put the display backlight
to full brightness after ohci1394 was unloaded and reloaded.

Signed-off-by: Stefan Richter 
[dsd@gentoo.org: also added missing if condition, commit
 63cca59e89892497e95e1e9c7156d3345fb7e2e8]
Signed-off-by: Daniel Drake 
Acked-by: Stefan Richter 
Signed-off-by: Chris Wright

[ETH1394]: Fix unaligned accesses.

2006-10-30T23:24:38+00:00

Several u64 objects are derefernced in situations where the
pointer is not guarenteed to be aligned correctly.  Use
get_unaligned() as needed.

Thanks to Will Simoneau for lots of testing and debugging
help.

Signed-off-by: David S. Miller 
Acked-by: Stefan Richter

ieee1394: ohci1394: revert fail on error in suspend

2006-10-29T19:02:23+00:00

Some errors during preparation for suspended state can be skipped with a
warning instead of a failure of the whole suspend transition, notably an
error in pci_set_power_state.

Signed-off-by: Stefan Richter

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

2006-10-08T19:28:41+00:00

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: nodemgr: fix startup of knodemgrd

ieee1394: nodemgr: fix startup of knodemgrd

2006-10-08T10:10:26+00:00

Revert a thinko in commit d2f119fe319528da8c76a1107459d6f478cbf28c:
When knodemgrd starts, it needs to sleep until host->generation was
incremented above its initial value of 0.  My wrong logic caused it to
start sending requests when the bus wasn't completely ready.  Seen as
"AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1.

Signed-off-by: Stefan Richter

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05T14:10:12+00:00

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells 
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

Fix several typos in drivers/

2006-10-03T20:31:37+00:00

Signed-off-by: Adrian Bunk

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

2006-09-30T16:38:19+00:00

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (48 commits)
  ieee1394: raw1394: arm functions slept in atomic context
  ieee1394: sbp2: enable auto spin-up for all SBP-2 devices
  MAINTAINERS: updates to IEEE 1394 subsystem maintainership
  ieee1394: ohci1394: check for errors in suspend or resume
  set power state of firewire host during suspend
  ieee1394: ohci1394: more obvious endianess handling
  ieee1394: ohci1394: fix endianess bug in debug message
  ieee1394: sbp2: don't prefer MODE SENSE 10
  ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne
  ieee1394: nodemgr: fix rwsem recursion
  ieee1394: sbp2: more help in Kconfig
  ieee1394: sbp2: prevent rare deadlock in shutdown
  ieee1394: sbp2: update includes
  ieee1394: sbp2: better handling of transport errors
  ieee1394: sbp2: recheck node generation in sbp2_update
  ieee1394: sbp2: safer agent reset in error handlers
  ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"
  CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c
  ieee1394: safer definition of empty macros
  video1394: add poll file operation support
  ...

i2c-algo-bit: Discard the mdelay data struct member

2006-09-26T22:38:51+00:00

i2c-algo-bit: Discard the mdelay data struct member

The i2c_algo_bit_data structure has an mdelay member, which is not
used by the algorithm code (the code has always been ifdef'd out.)
Let's discard it to save some code and memory.

Signed-off-by: Jean Delvare 
Acked-by: Mauro Carvalho Chehab 
Cc: Adrian Bunk 
Signed-off-by: Greg Kroah-Hartman