Commit 1448d7c6a2ff96d3b52ecae49e2d0f046a097fe0 upstream. As per https://bugs.launchpad.net/bugs/294391. These got one sample of each iPod generation going. However there still occurred I/O stalls with the 3rd generation iPod which remain undiagnosed at the time of this writing. Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 64c634ef83991b390ec0503e61f16efb0ba3c60b upstream. Camcorders have a tendency to fail read requests to their config ROM and write request to their FCP command register with ack_busy_X. This has become a problem with newer kernels and especially Panasonic camcorders, causing AV/C in dvgrab and kino to fail. Dvgrab for example frequently logs "send oops"; kino reports loss of AV/C control. I suspect that lower CPU scheduling latencies in newer kernels made this issue more prominent now. According to https://sourceforge.net/tracker/?func=detail&atid=114103&aid=2492640&group_id=14103 this can be fixed by configuring the FireWire controller for more hardware retries for request transmission; these retries are evidently more successful than libavc1394's own retry loop (typically 3 tries on top of hardware retries). Presumably the same issue has been reported at https://bugzilla.redhat.com/show_bug.cgi?id=449252 and https://bugzilla.redhat.com/show_bug.cgi?id=477279 . Tested-by: Mathias Beilstein Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to http://bugzilla.kernel.org/show_bug.cgi?id=12206, Freecom FireWire Hard Drive 1TB reports max_rom=2 but returns garbage if block read requests are used to read the config ROM. Force max_rom=0 to limit them to quadlet read requests. Reported-by: Christian Mueller <cm1@mumac.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
The firewire nodemanager function "nodemgr_host_thread" contains a loop that calls try_to_freeze near the top of the loop, but then delays for up to 3.25 seconds (plus time to do work) before getting back to the top of the loop. When starting a cycle post-boot, this doesn't seem to bite, but it is causing a noticeable delay at boot time, when freezing processes prior to starting to read the image. The following patch adds invocation of try_to_freeze to the subloops that are used in the body of this function. With these additions, the time to freeze when starting to resume at boot time is virtually zero. I'm no expert on firewire, and so don't know that we shouldn't check the return value and jump back to the top of the loop or such like after being frozen, but I submit it for your consideration. Signed-off-by: Nigel Cunningham <nigel@tuxonice.net> The delay until nodemgr freezes was up to 0.25s (plus time for node probes) in Linux 2.6.27 and older and up to 3.25s (plus ~) since Linux 2.6.28-rc1, hence much more noticeable. try_to_freeze() without any jump is correct. The surrounding code in the respective loops will catch whether another bus reset happens during the freeze and handle it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
An intermediate transition from _RUNNING to _IN_SHUTDOWN could have been missed by the former code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
If there is more than one FireWire controller present, dummy_zero_addr and dummy_max_addr were added multiple times to different lists, thus corrupting the lists. Fix this by allocating them dynamically per host instead of just once globally. (Perhaps a better address space allocation algorithm could rid us of the two dummy address spaces.) Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10129 . Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Add another model ID of a broken firmware to prevent early I/O errors by acesses at the end of the disk. Reported at linux1394-user, http://marc.info/?t=122670842900002 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: dv1394: fix possible deadlock in multithreaded clients ieee1394: raw1394: fix possible deadlock in multithreaded clients ieee1394: struct device - replace bus_id with dev_name(), dev_set_name() firewire: struct device - replace bus_id with dev_name(), dev_set_name()
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a possible though highly unlikely deadlock:
Thread A: Thread B:
- acquire mmap_sem - dv1394_ioctl/read/write()
- dv1394_mmap() - acquire video->mtx
- acquire video->mtx - copy_to/from_user(), possible page fault:
acquire mmap_sem
The simplest fix is to use mutex_trylock() instead of mutex_lock() in
dv1394_mmap(). This changes the behavior under contention in a way
which is visible to userspace clients. However, my guess is that no
clients exist which use mmap vs. ioctl/read/write on the dv1394
character device file interface in concurrent threads.
Reported-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>