linux-toradex.git/drivers/iio/accel, branch v4.19-rc8 Linux kernel for Apalis and Colibri modules Merge tag 'iio-for-4.19b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next 2018-07-25T08:12:07+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-07-25T08:12:07+00:00 3ceefa3ffd17daacef3e09f895f67721fb1f6b79 Jonathan writes: Second set of IIO new device support, features and cleanups. There are also a couple of fixes that can wait for the coming merge window. Core new features * Support for phase channels (used in time of flight sensors amongst other things) * Support for deep UV light channel modifier. New Device Support * AD4758 DAC - New driver and dt bindings. * adxl345 - Support the adxl375 +-200g part which is register compatible. * isl29501 Time of flight sensor. - New driver * meson-saradc - Support the Meson8m2 Socs - right now this is just an ID, but there will be additional difference in future. * mpu6050 - New ID for 6515 variant. * si1133 UV sensor. - New driver * Spreadtrum SC27xx PMIC ADC - New driver and dt bindings. Features * adxl345 - Add calibration offset readback and writing. - Add sampling frequency control. Fixes and Cleanups * ad5933 - Use a macro for the channel definition to reduce duplication. * ad9523 - Replace use of core mlock with a local lock. Part of ongoing efforts to avoid confusing the purpose of mlock which is only about iio core state changes. - Fix displayed phase which was out by a factor of 10. * adxl345 - Add a link to the datasheet. - Rework the use of the address field in the chan_spec structures to allow addition of more per channel information. * adis imu - Mark switch fall throughs. * at91-sama5d2 - Fix some casting on big endian systems. * bmp280 - Drop some DT elements that aren't used and should mostly be done from userspace rather than in DT. * hx711 - add clock-frequency dt binding and resulting delay to deal with capacitance issue on some boards. - fix a spurious unit-address in the example. * ina2xx - Avoid a possible kthread_stop with a stale task_struct. * ltc2632 - Remove some unused local variables (assigned but value never used). * max1363 - Use device_get_match_data to remove some boilerplate. * mma8452 - Mark switch fall throughs. * sca3000 - Fix a missing return in a switch statement (a bad fallthrough previously!) * sigma-delta-modulator - Drop incorrect unit address from the DT example. * st_accel - Use device_get_match_data to drop some boiler plate. - Move to probe_new for i2c driver as second parameter not used. * st_sensors library - Use a strlcpy (safe in this case). * st_lsm6dsx - Add some error logging. * ti-ads7950 - SPDX - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms EV3 where some channels are used for power supply monitoring at a very low rate. * ti-dac5571 - Remove an unused variable. * xadc - Drop some dead code. 
Jonathan writes:

Second set of IIO new device support, features and cleanups.

There are also a couple of fixes that can wait for the coming merge
window.

Core new features

* Support for phase channels (used in time of flight sensors amongst
  other things)
* Support for deep UV light channel modifier.

New Device Support

* AD4758 DAC
  - New driver and dt bindings.
* adxl345
  - Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
  - New driver
* meson-saradc
  - Support the Meson8m2 Socs - right now this is just an ID, but there will
    be additional difference in future.
* mpu6050
  - New ID for 6515 variant.
* si1133 UV sensor.
  - New driver
* Spreadtrum SC27xx PMIC ADC
  - New driver and dt bindings.

Features

* adxl345
  - Add calibration offset readback and writing.
  - Add sampling frequency control.

Fixes and Cleanups

* ad5933
  - Use a macro for the channel definition to reduce duplication.
* ad9523
  - Replace use of core mlock with a local lock. Part of ongoing efforts
    to avoid confusing the purpose of mlock which is only about iio core
    state changes.
  - Fix displayed phase which was out by a factor of 10.
* adxl345
  - Add a link to the datasheet.
  - Rework the use of the address field in the chan_spec structures to
    allow addition of more per channel information.
* adis imu
  - Mark switch fall throughs.
* at91-sama5d2
  - Fix some casting on big endian systems.
* bmp280
  - Drop some DT elements that aren't used and should mostly be done from
    userspace rather than in DT.
* hx711
  - add clock-frequency dt binding and resulting delay to deal with capacitance
    issue on some boards.
  - fix a spurious unit-address in the example.
* ina2xx
  - Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
  - Remove some unused local variables (assigned but value never used).
* max1363
  - Use device_get_match_data to remove some boilerplate.
* mma8452
  - Mark switch fall throughs.
* sca3000
  - Fix a missing return in a switch statement (a bad fallthrough
    previously!)
* sigma-delta-modulator
  - Drop incorrect unit address from the DT example.
* st_accel
  - Use device_get_match_data to drop some boiler plate.
  - Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
  - Use a strlcpy (safe in this case).
* st_lsm6dsx
  - Add some error logging.
* ti-ads7950
  - SPDX
  - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
    EV3 where some channels are used for power supply monitoring at a very low
    rate.
* ti-dac5571
  - Remove an unused variable.
* xadc
  - Drop some dead code.
iio: sca3000: Fix missing return in switch 2018-07-24T17:17:18+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2018-07-07T17:44:01+00:00 c5b974bee9d2ceae4c441ae5a01e498c2674e100 The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a return and will fall through to the default case and errorenously return -EINVAL. Fix this by adding in missing *return ret*. Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control") Reported-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a
return and will fall through to the default case and errorenously
return -EINVAL.

Fix this by adding in missing *return ret*.

Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: adxl345: Add support for the ADXL375 2018-07-15T09:18:15+00:00 Lars-Peter Clausen lars@metafoo.de 2018-07-13T11:50:44+00:00 ef89f4b96a2ab8dc1a0a3815d9365240e4c3c06b The ADXL375 is fully register map compatible to the ADXL345 (including the device ID register returning the same value ...). The only difference is the resolution of the acceleration sensor. The ADXL375 can measure up to +-200g of acceleration. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL375.PDF Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The ADXL375 is fully register map compatible to the ADXL345 (including the
device ID register returning the same value ...).

The only difference is the resolution of the acceleration sensor. The
ADXL375 can measure up to +-200g of acceleration.

Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL375.PDF

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: accel: adxl345: add sampling frequency support 2018-07-15T08:19:06+00:00 Akinobu Mita akinobu.mita@gmail.com 2018-07-09T15:10:08+00:00 382fa5812583b6c3a4d02a5830b70ec7ee2f07a3 The ADXL345 provides selectable output data rate. This adds the iio channel information for the sampling frequency with that feature. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The ADXL345 provides selectable output data rate.  This adds the iio
channel information for the sampling frequency with that feature.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: mma8452: Mark expected switch fall-through 2018-07-07T17:04:08+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2018-07-03T19:44:36+00:00 e161ef7c3c376f6807cdef7e8a2804b964dd7584 In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used in this case: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used in this case: -Wimplicit-fallthrough=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO: st_accel_i2c.c: Use probe_new() instead of probe() 2018-07-07T16:33:18+00:00 Nikolaus Voss nikolaus.voss@loewensteinmedical.de 2018-07-03T06:06:57+00:00 6b0b3e378e16f75338665fa519c2a06e4a071889 struct i2c_device_id argument of probe() is not used, so use probe_new() instead. Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
struct i2c_device_id argument of probe() is not used, so use probe_new()
instead.

Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IIO: st_accel_i2c.c: Simplify access to driver data 2018-07-07T16:32:51+00:00 Nikolaus Voss nikolaus.voss@loewensteinmedical.de 2018-07-03T05:41:00+00:00 19868faad4c59646a9fbebc34c3bf07733db341e Use device_get_match_data API to simplify access to driver data. Let acpi_device_id table entries point to the same driver data as of_device_id table entries and uniquify access to driver data by using device_get_match_data API. Remove unused i2c_device_id .driver_data fields. Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Use device_get_match_data API to simplify access to driver data.
Let acpi_device_id table entries point to the same driver data as
of_device_id table entries and uniquify access to driver data by using
device_get_match_data API. Remove unused i2c_device_id .driver_data
fields.

Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: accel: adxl345: add calibration offset support 2018-06-30T17:27:27+00:00 Akinobu Mita akinobu.mita@gmail.com 2018-06-25T15:22:42+00:00 732238e22e4c5497bd76d02adcf5c4fcba6dcb67 The ADXL345 provides the offset adjustment registers for each axis. This adds the iio channel information for the calibraion offsets with that feature. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
The ADXL345 provides the offset adjustment registers for each axis.
This adds the iio channel information for the calibraion offsets with
that feature.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: accel: adxl345: convert address field usage in iio_chan_spec 2018-06-30T17:25:05+00:00 Akinobu Mita akinobu.mita@gmail.com 2018-06-25T15:22:41+00:00 9048f1f18a70a01eaa3c8e7166fdb2538929d780 Currently the address field in iio_chan_spec is filled with an accel data register address for the corresponding axis. In preparation for adding calibration offset support, this sets the address field to the index of accel data registers instead of the actual register address. This change makes it easier to access both accel registers and calibration offset registers with fewer lines of code as these are located in X-axis, Y-axis, Z-axis order. Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Currently the address field in iio_chan_spec is filled with an accel
data register address for the corresponding axis.

In preparation for adding calibration offset support, this sets the
address field to the index of accel data registers instead of the actual
register address.

This change makes it easier to access both accel registers and
calibration offset registers with fewer lines of code as these are
located in X-axis, Y-axis, Z-axis order.

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: accel: adxl345: add link to datasheet 2018-06-30T17:23:42+00:00 Akinobu Mita akinobu.mita@gmail.com 2018-06-25T15:22:40+00:00 4b5de1fa97b9932db0e989afe7dba3029fbd4545 Add a link to the ADXL345 datasheet Cc: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Add a link to the ADXL345 datasheet

Cc: Eva Rachel Retuya <eraretuya@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>