linux-toradex.git/drivers/iio/accel, branch v4.4.76

iio: accel: kxsd9: Fix scaling bug

2016-09-24T08:07:38+00:00

commit 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de upstream.

All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Tested-by: Jonathan Cameron 
Signed-off-by: Linus Walleij 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: accel: bmc150: reset chip at init time

2016-09-24T08:07:38+00:00

commit 1c500840934a138bd6b13556c210516e9301fbee upstream.

In at least one known setup, the chip comes up in a state where reading
the chip ID returns garbage unless it's been reset, due to noise on the
wires during system boot.

All supported chips have the same reset method, and based on the
datasheets they all need 1.3 or 1.8ms to recover after reset. So, do
the conservative thing here and always reset the chip.

Signed-off-by: Olof Johansson 
Reviewed-by: Srinivas Pandruvada 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: accel: kxsd9: Fix raw read return

2016-09-24T08:07:37+00:00

commit 7ac61a062f3147dc23e3f12b9dfe7c4dd35f9cb8 upstream.

Any readings from the raw interface of the KXSD9 driver will
return an empty string, because it does not return
IIO_VAL_INT but rather some random value from the accelerometer
to the caller.

Signed-off-by: Linus Walleij 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: accel: kxsd9: fix the usage of spi_w8r8()

2016-07-27T16:47:37+00:00

commit 0c1f91b98552da49d9d8eed32b3132a58d2f4598 upstream.

These two spi_w8r8() calls return a value with is used by the code
following the error check. The dubious use was caused by a cleanup
patch.

Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.")
Signed-off-by: Linus Walleij 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: accel: bmc150: fix endianness when reading axes

2016-04-20T06:42:12+00:00

commit 2215f31dc6f88634c1916362e922b1ecdce0a6b3 upstream.

For big endian platforms, reading the axes will return
invalid values.

The device stores each axis value in a 16 bit little
endian register. The driver uses regmap_read_bulk to get
the axis value, resulting in a 16 bit little endian value.
This needs to be converted to cpu endianness to work
on big endian platforms.

Fix endianness for big endian platforms by converting
the values for the axes read from little endian to
cpu.

This is also partially fixed in commit b6fb9b6d6552 ("iio:
accel: bmc150: optimize transfers in trigger handler").

Signed-off-by: Irina Tirdea 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: add IIO_TRIGGER dependency to STK8BA50

2016-02-25T20:01:17+00:00

commit 01cc5235604d61018712c11a14d74230f6a38bf4 upstream.

Ran into this on UML:

drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’:
drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration]

iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected.

Signed-off-by: Vegard Nossum 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12+00:00

Pull spi updates from Mark Brown:
 "Quite a lot of activity in SPI this cycle, almost all of it in drivers
  with a few minor improvements and tweaks in the core.

   - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
   - Support for big endian in the bcm63xx driver.
   - Multiple slave support for the mt8173
   - New driver for the auxiliary SPI controller in bcm2835 SoCs.
   - Support for Layerscale SoCs in the Freescale DSPI driver"

* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
  spi: pxa2xx: Add support for Intel Broxton
  spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
  spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
  spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
  spi: Add DSPI support for layerscape family
  spi: ti-qspi: improve ->remove() callback
  spi/spi-xilinx: Fix race condition on last word read
  spi: Drop owner assignment from spi_drivers
  spi: Add THIS_MODULE to spi_driver in SPI core
  spi: Setup the master controller driver before setting the chipselect
  spi: dw: replace magic constant by DW_SPI_DR
  spi: mediatek: mt8173 spi multiple devices support
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: Update document devicetree bindings to support multiple devices
  spi: fix kernel-doc warnings about missing return desc in spi.c
  spi: fix kernel-doc warnings about missing return desc in spi.h
  spi: pxa2xx: Align a few defines
  spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
  ...

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next

2015-11-04T11:02:12+00:00

spi: Drop owner assignment from spi_drivers

2015-10-28T01:30:17+00:00

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis 
Acked-by: Jonathan Cameron 
Signed-off-by: Mark Brown

Merge 4.3-rc7 into staging-next

2015-10-27T00:13:38+00:00

We want the other staging patches in this branch as well.

Signed-off-by: Greg Kroah-Hartman